Opens in a new tab

TPS73618DBVR

1.8V LDO, 400mA, 30µVRMS noise, 68dB PSRR, SOT-23-5

12151

Effective Inventory

Image for reference only

Manufacturer Part:

TPS73618DBVR

Package:

SOT-23-5 (2.9 x 1.6 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS73618DBVR from Texas Instruments is an ultra-low-noise, high PSRR LDO regulator with fixed 1.8V output, 400mA capability, and only 30 µVRMS output noise for noise-sensitive applications.

Key Specifications

Manufacturer Texas Instruments
Output Voltage 1.8V fixed
Input Voltage 2.7V to 5.5V
Output Current 400 mA
Dropout Voltage 75 mV @ 400mA
PSRR 68 dB @ 1kHz
Output Noise 30 µVRMS (10Hz-100kHz)
IQ 400 µA typical
Package SOT-23-5
Operating Temperature -40°C to +125°C

Features

  • Fixed 1.8V output
  • Ultra-low noise: 30 µVRMS
  • High PSRR: 68 dB @ 1kHz
  • Low dropout: 75 mV @ 400mA
  • Low quiescent current: 400 µA
  • Enable pin for power sequencing
  • Stable with ceramic capacitors
  • Thermal shutdown protection

Applications

  • RF/analog power supply
  • VCO and PLL power
  • Audio codec supply
  • Portable communications
Product Introduction: TPS73618DBVR Product Introduction

The TPS73618DBVR from Texas Instruments is an ultra-low-noise LDO regulator with fixed 1.8V output and 400mA capability. Delivering only 30 µVRMS output noise with 68 dB PSRR at 1kHz, it is designed for noise-sensitive RF, analog, and audio applications. The low 75 mV dropout at full load, combined with only 400 µA quiescent current and an enable pin, makes it ideal for battery-powered portable equipment.

Working Principle: TPS73618DBVR Working Principle

The TPS73618 uses a CMOS LDO architecture with an optimized noise reduction network. A noise reduction capacitor on the NR pin filters the reference voltage, achieving 30 µVRMS output noise. The PMOS pass transistor provides low dropout, while the fast transient response handles load steps. Ceramic output capacitors ensure stability.

Pin Description: TPS73618DBVR Pin Definition and Functions
Pin Name Function
1 IN Input supply
2 GND Ground
3 EN Enable (active high)
4 NR Noise reduction capacitor
5 OUT 1.8V regulated output
Application Scenarios: In which products and applications is TPS73618DBVR used
  • RF transceiver power supply
  • VCO/PLL clean power
  • Audio codec analog supply
  • Portable communications equipment
Alternative Models: What chips are recommended as replacements for TPS73618DBVR
Manufacturer Part Number Notes
TI TPS73633DBVR 3.3V version
TI TPS73625DBVR 2.5V version
ADI LT1761ES5-1.8 Similar low-noise LDO

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1