Opens in a new tab

TPS7A1650QDGNRQ1

60V/100mA LDO, 5uA IQ, 5V fixed, PG output, AEC-Q100, HVSSOP-8

3538

Effective Inventory

Image for reference only

Manufacturer Part:

TPS7A1650QDGNRQ1

Package:

HVSSOP-8 (3.0 x 3.0 x 0.9 mm, DGN package w/ thermal pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS7A1650QDGNRQ1 from Texas Instruments is an AEC-Q100 automotive 60V, 5uA IQ, 100mA low-dropout regulator with power-good and enable in an 8-pin HVSSOP package.

Key Specifications

Input Voltage 3V to 60V
Output Voltage 5.0V (fixed)
Output Current 100 mA
Quiescent Current (IQ) 5 uA (typ)
Shutdown Current 1 uA (typ)
Dropout Voltage 60 mV @ 20 mA
Output Accuracy +/-2%
PSRR 72 dB @ 100Hz
Power-Good Output Yes (open-drain, programmable delay)
Enable Pin Yes (CMOS compatible)
Current Limit Yes (internal)
AEC-Q100 Grade 1 (-40 to +125C)
Package HVSSOP-8 (3.0 x 3.0mm w/ thermal pad)
Operating Temperature -40 to +125 C

Features

  • Ultra-low 5uA IQ for battery life extension
  • 60V input withstands automotive transients
  • Power-good with programmable delay
  • Stable with ceramic capacitors (2.2uF min)
  • Current limit and thermal shutdown
  • Functional safety documents available

Applications

  • Automotive battery-powered always-on systems
  • 12V/24V battery to 5V logic supply
  • Industrial backup and UPS systems
  • Power tool battery management
Product Introduction: TPS7A1650QDGNRQ1 Product Introduction

The TPS7A1650QDGNRQ1 from Texas Instruments is an AEC-Q100 Grade 1 qualified ultra-low quiescent current low-dropout (LDO) voltage regulator designed for automotive and industrial battery-powered applications. The device accepts input voltages from 3V to 60V and provides a fixed 5.0V output at up to 100mA, making it ideal for generating a 5V logic supply directly from 12V or 24V automotive battery systems without a pre-regulator. The ultra-low 5uA quiescent current (typical) is critical for always-on battery-powered systems where the regulator must remain active while the vehicle is parked, minimizing battery drain over weeks or months. The 60V maximum input voltage provides ample margin for automotive load dump transients (up to 40V) and double-battery jump-start conditions (24V nominal). The 60mV dropout voltage at 20mA load ensures the output remains regulated even when the battery voltage drops during cranking. The power-good (PG) output with programmable delay using an external capacitor allows system power-rail sequencing, informing the microcontroller when the 5V rail is within regulation before enabling other system functions. The enable (EN) pin is compatible with standard CMOS logic, allowing direct control from a microcontroller GPIO. Internal current limiting and thermal shutdown protect the device from fault conditions. The output is stable with ceramic capacitors as small as 2.2uF, enabling compact solution size. Functional safety documentation is available to support ISO 26262 system design.

Working Principle: TPS7A1650QDGNRQ1 Working Principle

The TPS7A1650QDGNRQ1 operates as a low-dropout linear voltage regulator with ultra-low quiescent current. Key subsystems include: (1) Pass Transistor – a P-channel MOSFET pass element connects VIN to VOUT; the error amplifier drives the pass transistor gate to regulate VOUT at 5.0V; the PMOS architecture allows low dropout (VIN can be close to VOUT) and eliminates the need for a charge pump; (2) Ultra-Low IQ Design – the internal bias circuitry and error amplifier are designed to consume only 5uA total quiescent current at no load; this is achieved through sub-threshold biasing techniques and minimal internal loading; the 1uA shutdown current further reduces battery drain when the device is disabled via the EN pin; (3) Error Amplifier – a precision error amplifier compares a fraction of VOUT (via internal resistor divider for fixed-output versions) with an internal bandgap reference (approximately 1.2V); the amplifier output drives the pass transistor gate; the +/-2% output accuracy is maintained over line, load, and temperature; (4) Power-Good Circuit – an internal comparator monitors VOUT; when VOUT exceeds approximately 92% of the nominal voltage, the PG open-drain output is released (goes high-impedance); an external capacitor on the PG delay pin sets the deglitch delay time; (5) Protection – internal current limit (approximately 300mA) protects against output short circuits; thermal shutdown disables the output when junction temperature exceeds approximately 160C; the device auto-recovers when the fault is removed.

Pin Description: TPS7A1650QDGNRQ1 Pin Definition and Functions
Pin Name Function
1 OUT Regulated 5V output
2 PG Power-good output (open-drain, active high)
3 EN Enable input (high = enabled, CMOS compatible)
4 GND Ground
5 NR/SS Noise reduction / soft-start (external capacitor)
6 IN Input supply (3V to 60V)
7 PG_DELAY Power-good delay programming (external capacitor)
8 GND Ground / thermal pad
Application Scenarios: In which products and applications is TPS7A1650QDGNRQ1 used
  • Automotive always-on: 12V battery to 5V MCU supply at 20mA continuous, 5uA IQ preserves battery during parking
  • 24V truck system: regulate 24V battery to 5V for telematics ECU with 60V transient withstand
  • Industrial backup: 48V UPS battery to 5V with PG output for system power sequencing Power tool BMS: 36V/48V Li-Ion pack to 5V for battery management IC
Alternative Models: What chips are recommended as replacements for TPS7A1650QDGNRQ1
Manufacturer Part Number Package Notes
TI TPS7A1633QDGNRQ1 HVSSOP-8 3.3V output version
TI TPS7A16A01QDGNRQ1 HVSSOP-8 Adjustable output version
onsemi NCV8164ASN500T1G TSOP-5 40V/150mA, automotive LDO
TI TPS70950DRVR WSON-6 30V/150mA, 1uA IQ

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1