Opens in a new tab

TPS7A2550DRVR

300mA LDO, 5V fixed, 2uA IQ, 18V input, PG, WSON-6

12000

Effective Inventory

Image for reference only

Manufacturer Part:

TPS7A2550DRVR

Package:

6-Pin WSON (2.0 x 2.0 x 0.7 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS7A2550DRVR is a Texas Instruments 300mA 18V ultra-low IQ LDO with 5.0V fixed output, 2uA quiescent current, 340mV dropout, power-good output, and 1% accuracy. Packaged in 6-pin WSON, -40C to +125C.

Key Specifications

Output 5.0 V fixed
Current 300 mA
Dropout 340 mV max @ 300mA
IQ 2 uA
Input Range 2.4 V to 18 V
Accuracy 1%

Features

  • 5.0V fixed output, 300mA
  • 2uA ultra-low quiescent current
  • 2.4V to 18V input range
  • 340mV dropout at 300mA
  • 1% output accuracy
  • Power-good open-drain output
  • Thermal shutdown and current limit

Applications

  • Always-on sensor power
  • Smart grid and metering
  • Motor drive logic supply
  • Portable power tools
Product Introduction: TPS7A2550DRVR Product Introduction

The TPS7A2550DRVR is a Texas Instruments 300mA low-dropout linear regulator with 5.0V fixed output in a 6-pin WSON package. The standout feature is the 2uA quiescent current, among the lowest for 18V-input LDOs, making it ideal for always-on battery-powered and industrial systems where standby power consumption is critical. The 2.4V to 18V input range supports direct connection to 12V and 24V industrial bus rails, as well as multi-cell battery packs. The 340mV maximum dropout at full 300mA load allows efficient operation with minimal headroom. The 1% output accuracy over temperature provides reliable supply for microcontroller and sensor references. The power-good (PG) open-drain output can hold an MCU in reset until the output is valid, enabling controlled power sequencing. Active overshoot pulldown prevents output voltage overshoot during transient load conditions. Built-in current limit and thermal shutdown protect against fault conditions. The WSON package with exposed thermal pad provides good power dissipation in a compact 2x2mm footprint. Packaged in 6-pin WSON rated for -40C to +125C.

Working Principle: TPS7A2550DRVR Working Principle

The TPS7A25 uses a PMOS pass transistor for low dropout operation. The error amplifier compares a resistive divider tap of the output voltage with an internal bandgap reference, driving the PMOS gate to maintain regulation. The ultra-low 2uA quiescent current is achieved by operating the error amplifier and reference in a sub-threshold bias regime, consuming minimal current while maintaining regulation. When the output voltage drops below the PG threshold (typically 95% of nominal), the PG open-drain output pulls low, signaling power-not-good to the system. The PG pin can be wire-ORed with other PG outputs for multi-rail sequencing. The current limit circuit monitors the pass transistor current and reduces the gate drive when the limit is reached, operating in constant-current mode during overloads. Thermal shutdown disables the pass transistor when junction temperature exceeds the threshold (typically 165C), with automatic recovery when the device cools below the hysteresis point.

Pin Description: TPS7A2550DRVR Pin Definition and Functions
Pin Mnemonic Description
1 OUT 5.0V regulated output
2 PG Power-good (open-drain)
3 EN Enable (active high)
4 GND Ground (exposed pad)
5 IN Input supply (2.4-18V)
6 NC No connect
Application Scenarios: In which products and applications is TPS7A2550DRVR used
  • Always-on 5V sensor supply from 12V/24V industrial bus with 2uA standby current
  • Smart grid metering 5V logic supply with PG for MCU reset control
  • Motor drive 5V logic supply from 18V bus with thermal shutdown protection
  • Portable power tool 5V MCU supply with 340mV dropout for battery efficiency
Alternative Models: What chips are recommended as replacements for TPS7A2550DRVR
Model Manufacturer Key Difference
TPS7A2533DRVR TI 3.3V fixed version
TPS7A2650DRVR TI 1A, higher current
TLV71350 TI 150mA, smaller
NCP4625 onsemi Similar 18V, low IQ

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1