Opens in a new tab

TPS7A7001DDAT

2A ultra-LDO, 1.425-6.5V in, adj 0.5-5V out, 200mV dropout@1A, enable pin, HSOIC-8 PowerPAD

3200

Effective Inventory

Image for reference only

Manufacturer Part:

TPS7A7001DDAT

Package:

HSOIC-8 with PowerPAD (4.9 x 6.0 x 1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS7A7001DDAT is a 2A ultra-low-dropout (LDO) regulator from Texas Instruments operating from inputs as low as 1.425V with only 200mV typical dropout at 1A. The adjustable output (0.5V to 5V) is set by an external resistor divider. With an enable pin (1µA shutdown current), ±2% output accuracy, current limit, and thermal shutdown, it is ideal for point-of-load regulation where input and output voltages are very close.

Key Specifications

Output Type Adjustable (0.5V to 5V via external divider)
Output Current 2A maximum
Input Voltage 1.425V to 6.5V
Dropout Voltage 200mV typ @ 1A; 380mV max @ 2A
Reference Voltage 0.5V (typical)
Output Accuracy ±2% over line, load, temperature
Line Regulation 0.2%/V (typical)
Load Regulation 0.25%/A (typical)
Quiescent Current 3mA (typical)
Shutdown Current 1µA (typical)
PSRR @ 100kHz 28 dB
Enable Pin Yes (active high)
Protection Current limit, thermal shutdown, UVLO
Min Output Capacitor 4.7µF
Package HSOIC-8 with PowerPAD (4.9 x 6.0mm)
Operating Temperature -40°C to +125°C (junction)
θJA 46.4°C/W (DDA package)

Features

  • Ultra-low input voltage: operates down to 1.425V
  • Ultra-low dropout: 200mV at 1A, 380mV max at 2A
  • Adjustable output from 0.5V using external divider
  • 2A continuous output current
  • Enable pin with 1µA shutdown current
  • ±2% output voltage accuracy
  • Current limit and thermal shutdown protection
  • Stable with 4.7µF ceramic output capacitor
  • Supports up to 200µF output capacitance
  • Feed-forward capacitor option for improved transient response

Applications

  • Point-of-load regulation for FPGAs and DSPs
  • Core voltage regulation (1.0V to 1.8V rails)
  • Battery-powered systems with low headroom
  • Post-regulation after switching converters
  • Telecom and networking card power
  • Medical and portable devices
Product Introduction: TPS7A7001DDAT Product Introduction

The TPS7A7001DDAT is a high-performance 2A ultra-low-dropout linear regulator from Texas Instruments, designed for applications requiring very low input voltage and very low dropout. The device operates from input voltages as low as 1.425V and provides an adjustable output from 0.5V to 5V set by an external resistor divider. The dropout voltage is only 200mV typical at 1A and 380mV maximum at 2A, making it ideal for point-of-load regulation where VOUT is very close to VIN. The enable pin reduces shutdown current to 1µA, critical for battery-powered always-on systems. A feed-forward capacitor across the upper feedback resistor can improve transient response and PSRR. The HSOIC-8 PowerPAD package provides 46.4°C/W thermal resistance for efficient heat dissipation at full load.

Working Principle: TPS7A7001DDAT Working Principle

The TPS7A7001 uses a PNP pass transistor in a low-dropout configuration. The error amplifier compares a fraction of the output voltage (divided by R1 and R2) with the internal 0.5V bandgap reference. When VFB falls below 0.5V, the error amplifier drives the PNP base harder, increasing the pass transistor current and raising VOUT. The output voltage is set by VOUT = 0.5V × (1 + R1/R2). The ultra-low dropout is achieved because the PNP pass transistor saturates with only a small VCE — unlike NPN LDOs which require at least a VBE plus VCE(sat) of dropout. The enable pin gates the internal bias circuitry; when EN is low, all bias is shut down, reducing current to 1µA. The current limit circuit senses the pass transistor current and limits it to a safe value (typically 3A). Thermal shutdown activates at approximately 160°C junction temperature, turning off the pass transistor until the junction cools by 20°C. A feed-forward capacitor (CFF) across R1 adds a zero to the feedback loop, improving phase margin and transient response.

Pin Description: TPS7A7001DDAT Pin Definition and Functions
Pin Name Description
1 NC No connect
2 IN Input supply (1.425V to 6.5V)
3 IN Input supply (connect to pin 2)
4 EN Enable input (high = enabled, internal pull-up)
5 GND Ground
6 FB Feedback input (connect to output divider)
7 OUT Regulated output
8 OUT Regulated output (connect to pin 7)
Pad GND PowerPAD thermal pad (connect to GND plane)
Application Scenarios: In which products and applications is TPS7A7001DDAT used
  • FPGA Core Voltage (1.0V): Generate a 1.0V, 2A core supply for an FPGA from a 1.5V intermediate bus. The 200mV dropout at 1A leaves comfortable headroom. Set VOUT = 0.5V × (1 + R1/R2) with R2 = 10kΩ and R1 = 10kΩ. Add a 10nF feed-forward capacitor across R1 for improved transient response during FPGA logic switching events.
  • Battery-Powered Always-On Rail: Regulate a 3.6V lithium cell down to 3.3V for a wireless MCU. The 1.425V minimum input ensures operation even as the battery discharges to 3.4V. The enable pin connects to the MCU’s power management output, reducing current to 1µA during deep sleep. The 4.7µF ceramic output capacitor fits within the BOM budget.
  • Post-Regulation After DC/DC: Place the TPS7A7001 after a 1.8V switching converter to clean the 1.2V rail for a noise-sensitive ADC. The 200mV dropout consumes only 200mV of headroom from the 1.8V supply, and the 28dB PSRR at 100kHz further attenuates the switching ripple. A 10µF feed-forward capacitor optimizes the PSRR at higher frequencies.
Alternative Models: What chips are recommended as replacements for TPS7A7001DDAT
Model Iout Vin Min Dropout Key Difference
TPS7A7002 2A 1.425V 380mV Fixed voltage version
TPS7A8300 2A 1.1V 85mV Lower dropout, lower Vin, higher PSRR
TLV755P 1A 1.5V 300mV Smaller, lower current, SOT-23
NCP51100 1A 1.2V 200mV onsemi, lower Vin alternative

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1