Opens in a new tab

TPS82085SILR

3A high-efficiency step-down converter MicroSiP module with integrated inductor, 2.5-6V input, adjustable 0.8V-VIN output

7008

Effective Inventory

Image for reference only

Manufacturer Part:

TPS82085SILR

Package:

8-uSIL (3.0×2.8×1.3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS82085SILR from Texas Instruments is a high-efficiency 3A step-down converter MicroSiP power module with an integrated inductor. Housed in a compact 8-pin uSIL package (3.0mm x 2.8mm x 1.3mm), it combines a synchronous buck converter and inductor in a single device. It operates from a 2.5V to 6V input and delivers an adjustable output from 0.8V to VIN.

Key Specifications

Input Voltage Range 2.5V to 6V
Output Voltage Range 0.8V to VIN (adjustable)
Max Output Current 3A
Switching Frequency 2.4MHz
Quiescent Current 17uA (power save mode)
Efficiency Up to 95%
Package 8-pin uSIL (3.0×2.8×1.3mm)
Operating Temperature -40 to +125 C

Features

  • DCS-Control topology for excellent load transient response
  • Integrated inductor for minimal external components
  • Power save mode with 17uA quiescent current
  • 100% duty cycle for lowest dropout operation
  • Hiccup short-circuit protection and thermal shutdown
  • Power good output and enable pin for sequencing
  • CISPR 11 Class B compliant

Applications

  • Optical modules and fiber optic transceivers
  • Single-board computers and embedded systems
  • Solid-state drives (SSD)
  • Audio/video control systems
  • Low-power RF and radar systems
Product Introduction: TPS82085SILR Product Introduction

The TPS82085SILR is a 3A high-efficiency step-down converter in a MicroSiP power module package with an integrated inductor. Based on TIs DCS-Control topology, it delivers up to 95% efficiency with a 2.4MHz switching frequency. The device supports an input voltage range of 2.5V to 6V and provides an adjustable output from 0.8V to VIN. The integrated inductor eliminates the need for external inductor selection and simplifies PCB layout. The module automatically enters power save mode at light loads, reducing quiescent current to just 17uA. Protection features include hiccup short-circuit protection, thermal shutdown, and undervoltage lockout.

Working Principle: TPS82085SILR Working Principle

The TPS82085SILR employs DCS-Control (Direct Control with Seamless transition into Power Save Mode) topology, which combines the advantages of hysteretic, voltage, and current mode control. In PWM mode, the converter operates at a nominal 2.4MHz switching frequency for medium to heavy loads. As load decreases, the device seamlessly transitions to Power Save Mode (PSM), reducing switching frequency and minimizing quiescent current. The 100% duty cycle mode allows the high-side MOSFET to remain on continuously, minimizing the input-to-output voltage differential. Integrated soft-start prevents excessive inrush current, while the power good (PG) pin provides output voltage monitoring.

Pin Description: TPS82085SILR Pin Definition and Functions
Pin Name Type Description
1 VIN Power Input supply voltage
2 EN Input Enable pin (active high)
3 GND Ground Ground connection
4 FB Input Feedback voltage input
5 PG Output Power good output
6 VOUT Power Output voltage
7 GND Ground Ground connection
8 VIN Power Input supply voltage
Application Scenarios: In which products and applications is TPS82085SILR used
  • Optical module power supply with tight space constraints and high efficiency requirements
  • Portable battery-powered devices needing extended runtime with 17uA quiescent current
  • SSD and storage devices requiring compact, thermally efficient power conversion
  • Industrial control systems with 3.3V or 5V bus input rails
Alternative Models: What chips are recommended as replacements for TPS82085SILR
Model Manufacturer Key Difference
TPS82084SILR TI 2A version, same package
TPS82140SILR TI 1A, smaller solution size
LTM4625 Analog Devices 4A uModule, larger footprint
TPS62088YFP TI 3A, discrete inductor required

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1