Opens in a new tab

TS881ILT

Nanopower comparator, 0.85-5.5V, 210nA, 2μs prop delay, R-R I/O, SOT-23-5

8234

Effective Inventory

Image for reference only

Manufacturer Part:

TS881ILT

Package:

SOT-23-5 (2.9 x 1.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TS881ILT from STMicroelectronics is a rail-to-rail nanopower comparator operating from 0.85V to 5.5V with ultra-low 210nA typical supply current. Featuring 2μs propagation delay and push-pull output in an SOT-23-5 package, it is optimized for battery-powered and energy-harvesting applications.

Key Specifications

Supply Voltage Range 0.85V to 5.5V
Supply Current 210 nA (typical)
Propagation Delay 2 μs (typical, 100mV overdrive)
Input Offset Voltage 1 mV (typical)
Input Bias Current 10 pA (typical)
Output Type Push-Pull (rail-to-rail)
ESD Tolerance 8 kV HBM
Package SOT-23-5
Operating Temperature -40°C to +125°C

Features

  • Ultra-low 210nA supply current extends battery life in always-on applications
  • Operation down to 0.85V for single-cell battery and energy harvesting
  • Rail-to-rail input and output for maximum signal range
  • Fast 2μs propagation delay with 100mV overdrive
  • Built-in hysteresis for noise immunity on slow signals
  • ESD tolerance of 8kV HBM for robust handling

Applications

  • Battery-powered voltage monitoring and threshold detection
  • Energy harvesting system wake-up comparators
  • Portable medical device signal conditioning
  • Low-power sensor interface circuits
  • Power-on reset and brownout detection
Product Introduction: TS881ILT Product Introduction

The TS881ILT from STMicroelectronics is a single nanopower comparator designed for ultra-low power applications where extended battery life is critical. Operating from just 0.85V to 5.5V with a typical supply current of only 210nA, it enables always-on monitoring circuits in battery-powered and energy-harvesting systems. The device features rail-to-rail input and output capability, built-in hysteresis for clean switching on slow-moving signals, and a propagation delay of 2μs with 100mV overdrive. Available in SOT-23-5 and SC70-5 packages, it is specified over the -40°C to +125°C temperature range with 8kV HBM ESD tolerance.

Working Principle: TS881ILT Working Principle

The TS881ILT operates as a single-ended voltage comparator with three functional blocks. (1) The rail-to-rail input stage uses complementary P-channel and N-channel differential pairs to maintain valid common-mode operation across the entire supply voltage range from ground to VCC. Internal hysteresis of approximately 2.4mV creates two threshold levels that prevent output oscillation on slowly varying or noisy input signals. (2) The high-gain amplification stage provides sufficient voltage gain to convert small input differentials into full logic-level output swings while consuming minimal current. The ultra-low 210nA supply current is achieved through careful bias optimization. (3) The push-pull output stage drives rail-to-rail output voltages without requiring an external pull-up resistor, sourcing and sinking current directly into the load.

Pin Description: TS881ILT Pin Definition and Functions
Pin Name Function
1 OUT Push-pull output (rail-to-rail)
2 V- Negative supply / Ground
3 +IN Non-inverting input
4 -IN Inverting input
5 V+ Positive supply (0.85-5.5V)
Application Scenarios: In which products and applications is TS881ILT used
  • Battery voltage monitoring with sub-microamp current draw for years of operation
  • Energy harvesting system wake-up threshold detection with 0.85V minimum operation
  • Portable medical device alarm and limit comparators requiring minimal power
  • Sensor signal threshold detection in wireless IoT nodes
  • Power-on reset and undervoltage lockout in ultra-low-power systems
Alternative Models: What chips are recommended as replacements for TS881ILT
Model Manufacturer Key Difference
TS881IQ5T STMicroelectronics SC70-5 package option
TS9002 Silicon Labs Dual nanopower comparator
MAX9025 Maxim Nanopower comparator, SOT-23-5
TLV3491AIDBVR TI Nanopower, 0.9V, push-pull
LMV7219M7X/NOPB TI 7ns high-speed, 1.1mA

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1