Opens in a new tab

TTP223-BA6

Single-key capacitive touch detector, 2.0-5.5V, 1.5uA standby, SOT-23-6, adjustable sensitivity

14985

Effective Inventory

Image for reference only

Manufacturer Part:

TTP223-BA6

Package:

SOT-23-6 (2.70 x 1.50 x 0.95 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TTP223-BA6 is a single-key capacitive touch pad detector IC using charge detection technology. Operating from 2.0V to 5.5V with ultra-low 1.5 uA standby current, it replaces mechanical push-buttons with sealed touch pads. Sensitivity is adjustable via external capacitor (0-50pF), and output mode (direct or toggle) is configurable by pin strapping. Housed in a SOT-23-6 package.

Key Specifications

Type Single-Key Capacitive Touch Detector
Detection Method Charge detection
Supply Voltage 2.0V – 5.5V
Standby Current 1.5 uA (typical at 3V, low-power mode)
Operating Current 3.5 uA (typical at 3V)
Output Mode Direct (momentary) or Toggle (latching)
Output Logic Active-high or active-low (selectable)
Response Time 60 ms (fast mode), 220 ms (low-power mode)
Sensitivity Adj. External Cs capacitor (0-50 pF)
Auto-Calibration Yes (periodic and on release)
Package SOT-23-6
Operating Temp -40 to 85 C

Features

  • Ultra-low 1.5 uA standby current for battery-powered applications
  • Wide 2.0V to 5.5V operating voltage range
  • Sensitivity adjustable via external capacitor (0-50 pF)
  • Direct (momentary) or toggle (latching) output mode selectable
  • Active-high or active-low output selectable via SLH pin
  • Built-in LDO voltage regulator for stable operation
  • Auto-calibration with periodic re-calibration
  • No mechanical parts: wear-free, sealed, design-flexible touch pads

Applications

  • Touch button replacement for consumer electronics
  • Battery-powered touch switches and controls
  • Home appliances with sealed touch panels
  • LED touch dimmers and on/off switches
  • Industrial control panels with sealed interfaces
Product Introduction: TTP223-BA6 Product Introduction

The TTP223-BA6 is a single-key capacitive touch pad detector IC using charge detection technology. It determines finger proximity by detecting the change in charge level between the operator’s finger and the touch pad electrode. With ultra-low 1.5 uA standby current at 3V, it is optimized for battery-powered applications. The sensitivity is adjustable through an external capacitor (Cs, 0-50 pF), and the output mode is configurable via the STG and SLH pins: direct (momentary) or toggle (latching), active-high or active-low. The built-in LDO ensures stable operation across the wide 2.0V to 5.5V supply range.

Working Principle: TTP223-BA6 Working Principle

The TTP223-BA6 operates using charge detection technology. An internal oscillator charges and discharges the sense electrode through the SO pin. When a finger approaches the touch pad, the additional capacitance changes the charge/discharge timing, which is detected by the internal comparator. The STG pin selects between direct mode (output follows touch state, like a momentary button) and toggle mode (output toggles on each touch, like a latching switch). The SLH pin selects the active output level (high or low when touched). In low-power mode, the device periodically samples the sense electrode and returns to sleep, achieving 1.5 uA average current. Auto-calibration occurs approximately every 4 seconds during idle and 16 seconds after a touch release, compensating for environmental drift.

Pin Description: TTP223-BA6 Pin Definition and Functions
Pin Name Type Function
1 OUT Output Touch detection output (push-pull)
2 GND Ground Ground
3 SO Input Sense input (connect to touch pad)
4 SLH Input Output level select (GND=active-high, VDD=active-low)
5 VDD Power Supply voltage (2.0-5.5V)
6 STG Input Mode select (GND=direct, VDD=toggle)
Application Scenarios: In which products and applications is TTP223-BA6 used
  • Consumer electronics: Touch buttons replacing mechanical switches in remote controls and appliances
  • Battery devices: 1.5 uA standby current for long-life touch-activated products
  • Home appliances: Sealed glass/plastic touch panels for cooktops and microwaves
  • LED dimmers: Touch on/off and toggle mode for smart lighting controls
  • Industrial panels: Wear-free sealed touch interfaces for harsh environments
Alternative Models: What chips are recommended as replacements for TTP223-BA6
Manufacturer Part Number Package Notes
Tontek TTP223N-BA6 SOT-23-6 Higher sensitivity, slightly less stable
Microchip AT42QT1010-TSHR SOT-23-6 Single-key touch, similar function
Azoteq IQS133PNE DFN-8 Proximity/touch, more features
NXP PCF8883TS SOIC-8 Capacitive proximity switch

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1