Opens in a new tab

TXB0104RUTR

4-bit bidirectional level translator, auto-dir, 100Mbps, ±15kV ESD, UQFN-12

8500

Effective Inventory

Image for reference only

Manufacturer Part:

TXB0104RUTR

Package:

UQFN-12 / RUT-12 (2.00 x 1.70 x 0.45mm, 0.4mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TXB0104RUTR from Texas Instruments is a 4-bit bidirectional voltage-level translator with automatic direction sensing and ±15kV ESD protection in a 12-pin UQFN (2.0 x 1.7mm) package. It supports translation between 1.2V and 5.5V voltage nodes with push-pull topology, requiring no direction control signal.

Key Specifications

Number of Bits 4
Topology Push-Pull (auto-direction)
Data Rate (max) 100 Mbps
VCCA Range 1.2V to 3.6V
VCCB Range 1.65V to 5.5V (VCCA ≤ VCCB)
Propagation Delay 7 ns typical
Supply Current (max) 5 µA (ICC)
ESD Protection (B Port) ±15 kV HBM
ESD Protection (A Port) 2500V HBM
Ioff Support Yes (partial power-down)
VCC Isolation Yes (outputs Hi-Z if either VCC = GND)
Operating Temperature -40 to +85°C
Package UQFN-12 (RUT suffix)

Features

  • 4-bit bidirectional translation with auto-direction sensing
  • A port: 1.2V to 3.6V; B port: 1.65V to 5.5V
  • VCCA must not exceed VCCB
  • ±15kV ESD protection on B port (HBM)
  • Edge rate accelerator for fast transitions
  • OE input referenced to VCCA
  • 5µA max supply current
  • Ioff supports partial power-down
  • VCC isolation — outputs Hi-Z if either supply is GND
  • Latch-up exceeds 100mA (JESD 78 Class II)

Applications

  • GPIO level translation between MCU and peripherals
  • SPI/UART/JTAG voltage bridging
  • I2S audio bus level shifting
  • Mobile phone and tablet voltage interfacing
  • Portable equipment mixed-voltage bridging
Product Introduction: TXB0104RUTR Product Introduction

The TXB0104RUTR from TI is a 4-bit bidirectional voltage-level translator with automatic direction sensing in UQFN-12 (2.0×1.7mm). A port supports 1.2-3.6V, B port 1.65-5.5V (VCCA ≤ VCCB). 100Mbps data rate with push-pull topology. ±15kV ESD on B port. Edge rate accelerator for clean transitions. OE referenced to VCCA. RUT suffix denotes UQFN-12, R suffix denotes tape-and-reel. Ideal for SPI/UART/JTAG level translation in space-constrained portable devices.

Working Principle: TXB0104RUTR Working Principle

The TXB0104 uses an auto-direction sensing architecture with edge-rate accelerators. Each channel has one-shot circuits that detect transitions on either the A or B port and briefly turn on the corresponding output driver to accelerate the edge. After the one-shot pulse, the output driver returns to a high-impedance state, and the line is held by the external pull-up/pull-down or the driven device. This push-pull architecture requires driven devices to actively drive the bus — it does NOT support open-drain connections like I2C. The VCC isolation feature ensures all outputs enter Hi-Z if either VCCA or VCCB is at GND, preventing back-powering. The OE pin (referenced to VCCA) must be tied to GND via a pull-down resistor to guarantee Hi-Z during power sequencing.

Pin Description: TXB0104RUTR Pin Definition and Functions
Pin Name Type Function
1 OE Input Output enable (active high, referenced to VCCA)
2 GND Ground Ground
3 VCCA Power A-port supply (1.2-3.6V)
4 A1 I/O A-port data bit 1
5 A2 I/O A-port data bit 2
6 A3 I/O A-port data bit 3
7 A4 I/O A-port data bit 4
8 VCCB Power B-port supply (1.65-5.5V)
9 B1 I/O B-port data bit 1
10 B2 I/O B-port data bit 2
11 B3 I/O B-port data bit 3
12 B4 I/O B-port data bit 4
Application Scenarios: In which products and applications is TXB0104RUTR used
  • 1.8V MCU to 3.3V SPI Flash level translation at 50MHz
  • 2.5V FPGA to 5V peripheral GPIO bridging
  • JTAG TAP level translation between 1.2V core and 3.3V JTAG
  • Smartphone I2S audio bus 1.8V to 3.3V translation
  • UART level shifting between 3.3V MCU and 5V modem
Alternative Models: What chips are recommended as replacements for TXB0104RUTR
Manufacturer Part Number Package Notes
TI TXB0104PWR TSSOP-14 Larger TSSOP-14 package
TI TXS0104EYFPR DSBGA-12 Open-drain + push-pull, I2C capable
NXP 74LVC4245APW TSSOP-24 Direction-controlled 8-bit translator

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1