Opens in a new tab

TXS0102DQER

2-bit bidirectional level translator, auto-direction, 1.65-3.6V2.3-5.5V, VSSOP-8

14834

Effective Inventory

Image for reference only

Manufacturer Part:

TXS0102DQER

Package:

VSSOP-8 / US8 (2.30 x 2.00 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TXS0102DQER from Texas Instruments is a 2-bit bidirectional voltage-level translator with auto-direction sensing. Supporting data rates up to 24 Mbps (push-pull) and 2 Mbps (open-drain), it translates between 1.65V-3.6V (VCCA) and 2.3V-5.5V (VCCB) logic levels. The DQER suffix denotes the 8-pin VSSOP (US8) package rated for -40 to 85 C in tape-and-reel.

Key Specifications

Type 2-bit Bidirectional Level Translator
Channels 2
Direction Sensing Auto (no direction pin needed)
VCCA Range 1.65V – 3.6V
VCCB Range 2.3V – 5.5V
Data Rate (Push-Pull) 24 Mbps
Data Rate (Open-Drain) 2 Mbps
ESD Protection ±8 kV HBM on I/O
Package VSSOP-8 (US8, 2.3 x 2.0 mm)
Operating Temp -40 to 85 C

Features

  • Auto-direction sensing eliminates direction control pins
  • 2-bit bidirectional translation between 1.65V-3.6V and 2.3V-5.5V
  • Supports both push-pull (24 Mbps) and open-drain (2 Mbps) signals
  • Integrated 10 kOhm pull-up resistors for open-drain bus
  • ±8 kV HBM ESD protection on I/O pins
  • Partial power-down: Ioff prevents back-current
  • Low 1 uA quiescent current

Applications

  • I2C/SMBus level translation between 1.8V and 5V domains
  • SPI/UART level shifting in mixed-voltage systems
  • GPIO expansion across voltage domains
  • SDIO interface level translation
  • Multi-voltage MCU to peripheral interfacing
Product Introduction: TXS0102DQER Product Introduction

The TXS0102DQER from Texas Instruments is a 2-bit bidirectional voltage-level translator with automatic direction sensing that requires no direction-control pins. It translates between VCCA (1.65V-3.6V) and VCCB (2.3V-5.5V) logic domains, supporting push-pull signals at up to 24 Mbps and open-drain signals at up to 2 Mbps. Integrated 10 kOhm pull-up resistors facilitate open-drain bus connections such as I2C and SMBus. The Ioff circuit prevents damaging back-current when either supply is powered down, enabling use in hot-swap and partial-power-down applications.

Working Principle: TXS0102DQER Working Principle

The TXS0102DQER uses pass-transistor-based bidirectional translation. Each channel consists of an N-channel pass FET connecting the A-side and B-side I/O, with integrated 10 kOhm pull-up resistors on both sides. When one side drives low, the pass FET conducts and pulls the other side low. When both sides are released, the pull-ups restore the lines to their respective VCC levels. One-shot accelerator circuits briefly strengthen the pull-down during edge transitions for faster rise/fall times with open-drain signals. The auto-direction sensing is inherent: the pass FET conducts in both directions without needing to know which side is driving.

Pin Description: TXS0102DQER Pin Definition and Functions
Pin Name Type Function
1 VCCA Power A-side supply (1.65-3.6V)
2 A1 I/O A-side I/O channel 1
3 A2 I/O A-side I/O channel 2
4 GND Ground Ground
5 B2 I/O B-side I/O channel 2
6 B1 I/O B-side I/O channel 1
7 VCCB Power B-side supply (2.3-5.5V)
8 NC – No connect
Application Scenarios: In which products and applications is TXS0102DQER used
  • I2C/SMBus: Level translation between 1.8V/2.5V/3.3V MCU and 5V peripherals
  • SPI/UART: Bidirectional translation for mixed-voltage communication
  • GPIO: Multi-voltage domain bridging in portable devices
  • SDIO: Memory card interface level shifting
  • Sensor interfaces: 1.8V sensor to 3.3V/5V MCU translation
Alternative Models: What chips are recommended as replacements for TXS0102DQER
Manufacturer Part Number Package Notes
TI TXS0108EPWR TSSOP-20 8-bit version, same architecture
NXP NTB0102GS XSON-8 2-bit, auto-direction, similar specs
TI TXB0102DCUR VSSOP-8 2-bit, edge-rate accelerated, 1.2-3.6V1.65-5.5V
onsemi NLSV2T244MUTAG MicroPak-10 2-bit, direction pin, 8 Mbps

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1