Opens in a new tab

TXS0108ERGYR

8-bit auto-direction level translator, 1.4-3.6V to 1.65-5.5V, 110Mbps, 20-VQFN

3424

Effective Inventory

Image for reference only

Manufacturer Part:

TXS0108ERGYR

Package:

20-VQFN / RGY (4.5 x 3.5 x 1.0mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TXS0108ERGYR from Texas Instruments is an 8-bit bidirectional voltage-level translator for open-drain and push-pull applications in a 20-VQFN (4.5 x 3.5mm) package. It supports auto-direction sensing with no direction-control signal needed, translating between 1.4V-3.6V (A port) and 1.65V-5.5V (B port) logic levels at data rates up to 110Mbps push-pull and 1.2Mbps open-drain.

Key Specifications

Number of Bits 8
Data Rate (Push-Pull) 110Mbps
Data Rate (Open-Drain) 1.2Mbps
VCCA Range 1.4V to 3.6V
VCCB Range 1.65V to 5.5V
Direction Control Auto-direction (no control signal)
Propagation Delay 4.8ns typ.
Supply Current 8μA max
Package 20-VQFN (4.5 x 3.5 x 1.0mm)
Operating Temperature -40°C to +125°C

Features

  • No direction-control signal needed
  • 110Mbps push-pull data rate
  • 1.2Mbps open-drain data rate
  • Auto-direction sensing
  • 1.4V to 3.6V on A port, 1.65V to 5.5V on B port
  • No power-supply sequencing required
  • Edge-rate accelerators for fast edges
  • Output enable (OE) with Hi-Z state
  • IEC 61000-4-2 ESD: ±8kV contact on B port

Applications

  • I2C, SPI, UART level shifting
  • SDIO and GPIO voltage translation
  • Smartphone and tablet interfaces
  • Desktop PC motherboard level shifting
  • JTAG and MDIO interface translation
Product Introduction: TXS0108ERGYR Product Introduction

The TXS0108ERGYR from Texas Instruments is an 8-bit bidirectional voltage-level translator that uses two separate configurable power-supply rails. The A port tracks VCCA (1.4V-3.6V) and the B port tracks VCCB (1.65V-5.5V), enabling bidirectional translation between common logic levels (1.8V, 2.5V, 3.3V, 5V) without direction-control signals. With data rates up to 110Mbps in push-pull mode and 1.2Mbps in open-drain mode, it supports I2C, SPI, UART, GPIO, and SDIO interfaces in a compact 20-VQFN package.

Working Principle: TXS0108ERGYR Working Principle

The TXS0108E uses pass-transistor-based translation with integrated edge-rate accelerators and auto-direction sensing. Each channel consists of a pair of nMOS pass transistors that connect the A and B ports through a common node. The edge-rate accelerators (one-shot circuits) briefly turn on the pass transistors strongly during transitions to speed up edge rates, then reduce drive to prevent bus contention. For open-drain applications, internal pull-up resistors on both ports maintain the high state. The OE input disables all outputs by placing them in Hi-Z state when driven low.

Pin Description: TXS0108ERGYR Pin Definition and Functions
Pin Name Type Function
1 OE Input Output enable (active high)
2 VCCA Power A port supply (1.4-3.6V)
3-6 A1-A4 I/O A port data channels 1-4
7 GND Power Ground
8-11 A5-A8 I/O A port data channels 5-8
12 VCCB Power B port supply (1.65-5.5V)
13-16 B5-B8 I/O B port data channels 5-8
17 GND Power Ground
18-20 B1-B3 I/O B port data channels 1-3
Application Scenarios: In which products and applications is TXS0108ERGYR used
  • I2C bus level translation between 1.8V MCU and 3.3V peripherals
  • SPI interface voltage conversion in mixed-voltage systems
  • SDIO level shifting for SD card interfaces
  • JTAG debug port voltage adaptation
  • GPIO bank level translation in smartphones and tablets
Alternative Models: What chips are recommended as replacements for TXS0108ERGYR
Manufacturer Part Number Package Notes
TI TXS0108EPWR TSSOP-20 Same function, TSSOP package
TI TXS0108EZXYR UFBGA-20 Same function, BGA package
NXP 74LVC8T245 TSSOP-24 8-bit direction-controlled translator
Renesas ISL3035EIRZ QFN-20 8-bit auto-direction translator
onsemi NLSV4T3234DTR2G TSSOP-24 4-bit dual-supply translator

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1