Opens in a new tab

TXS02612RTWR

SDIO port expander with level translation, 6-ch SPDT, 1.1-3.6V, +/-8kV ESD, WQFN-24

4525

Effective Inventory

Image for reference only

Manufacturer Part:

TXS02612RTWR

Package:

WQFN-24 (RTW) 4×4 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TXS02612RTWR from Texas Instruments is an SDIO port expander with voltage-level translation in a WQFN-24 (RTW) 4×4 mm package. It integrates a 6-channel SPDT switch with level translation, allowing a single SDIO port to interface with two SDIO peripherals at independent voltages (1.1V to 3.6V), with +/-8 kV IEC ESD on the B port.

Key Specifications

Function 6-channel SPDT switch + level translation
Ports 1 SDIO (A) to 2 SDIO (B0/B1)
Data Rate 120 Mbps
Voltage Range 1.1V – 3.6V (VCCA, VCCB0, VCCB1)
Supply Current 36 uA max
Select Input SEL (referenced to VCCA)
ESD (B Port) +/-8 kV IEC 61000-4-2 contact
Package WQFN-24 (RTW) 4×4 mm
Temperature -40 to +85 deg C

Features

  • 6-to-12 demultiplexer/multiplexer for SDIO port expansion
  • Built-in level translation eliminates voltage mismatch between baseband and SD card
  • Three independent supply rails (VCCA, VCCB0, VCCB1) for maximum flexibility
  • +/-8 kV IEC ESD on B port for robust SD card interface protection
  • 70 kOhm pull-up resistors on unselected B port data and command lines

Applications

  • Cell phone baseband to SD card and SDIO peripheral interfacing
  • Bluetooth and WLAN module expansion via SDIO
  • Mobile TV and DVB-H module connection
  • Multi-card SD/MMC reader designs
  • Portable consumer electronics SDIO multiplexing
Product Introduction: TXS02612RTWR Product Introduction

The TXS02612 is an SDIO port expander with integrated voltage-level translation from Texas Instruments, designed to interface a cell phone baseband processor with two SDIO peripherals such as SD/MMC cards, Bluetooth modules, or WLAN adapters. The device includes a 6-channel SPDT switch (CLK, CMD, DAT0-DAT3) with bidirectional level translation capability, allowing the A port and two B ports to operate at different supply voltages from 1.1V to 3.6V. The SEL pin chooses between B0 and B1 ports, while 70 kOhm pull-up resistors on unselected B port data and command lines ensure proper bus idle states.

Working Principle: TXS02612RTWR Working Principle

The TXS02612 uses a 6-channel SPDT switch matrix to connect the A port (baseband side) to either the B0 or B1 port (peripheral side). The SEL pin, referenced to VCCA, determines which B port is active. For the selected B port, all 6 channels (CLK, CMD, DAT0-DAT3) pass bidirectional data with integrated level translation between VCCA and the selected VCCB. The CLK channel for the unselected port is held LOW, while DAT and CMD lines are pulled HIGH to their respective VCCB through 70 kOhm resistors. The level translation uses edge-rate accelerators for fast transitions, supporting data rates up to 120 Mbps. The B port features +/-8 kV IEC ESD protection for direct SD card connector connection.

Pin Description: TXS02612RTWR Pin Definition and Functions
Pin Name Type Function
1 DAT2A I/O Data bit 2, A port
3 DAT3A I/O Data bit 3, A port
4 CMDA I/O Command, A port
5 VCCA Power A-port supply (1.1-3.6V)
6 DAT0A I/O Data bit 0, A port
7 DAT1A I/O Data bit 1, A port
9 CLKA Input Clock input, A port
24 SEL Input Port select (Low=B0, High=B1)
2,11 GND Power Ground
Application Scenarios: In which products and applications is TXS02612RTWR used
  • Smartphone SD card + Bluetooth: expand one SDIO to two peripherals
  • Mobile TV: connect DVB-H module and SD card simultaneously
  • WLAN + SD card: dual SDIO peripheral with independent voltage levels
  • Multi-card readers: switch between two SD/MMC card slots
  • Portable GPS: SDIO expansion for GPS module and storage
Alternative Models: What chips are recommended as replacements for TXS02612RTWR
Manufacturer Part Number Package Notes
TI TXS02612ZQSR VFBGA-25 Same function, BGA package
TI TXS020629ABLR WQFN-24 Similar SDIO expander
NXP CBTL06GP213 QFN-24 6-channel MUX for SDIO
onsemi NC7SB3157P6X MicroPak-6 Single SPDT switch (lower channel count)
Renesas NC7SB3157P6X SC-88A Single channel alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1