Opens in a new tab

UBX-G7020-KT

Multi-GNSS module (GPS/GLONASS), 56ch, -162dBm, 2.5m CEP, LCC 9.7×10.1mm

5709

Effective Inventory

Image for reference only

Manufacturer Part:

UBX-G7020-KT

Package:

LCC-24 (9.7 x 10.1 x 2.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The UBX-G7020-KT from u-blox is a standalone multi-GNSS (GPS/GLONASS/QZSS) receiver module with 56 acquisition/22 tracking channels in a 9.7 x 10.1 x 2.5 mm LCC package. With 1.8V to 3.6V supply and -162dBm acquisition sensitivity, it provides precise positioning for automotive and industrial applications.

Key Specifications

GNSS Support GPS, GLONASS, QZSS
Acquisition Channels 56
Tracking Channels 22
Acquisition Sensitivity -142 dBm (cold), -162 dBm (hot)
Tracking Sensitivity -160 dBm
Position Accuracy 2.5m CEP (autonomous)
Time to First Fix (TTFF) 26s (cold), 1s (hot)
Supply Voltage 1.8V to 3.6V
Supply Current 46 mA (acquisition), 22 mA (tracking)
Interface UART, I2C, DDC (SPI on some variants)
Operating Temperature -40 to +85 C
Package LCC (9.7 x 10.1 x 2.5 mm)

Features

  • Multi-GNSS: GPS + GLONASS + QZSS
  • 56 acquisition / 22 tracking channels
  • -162dBm hot start acquisition sensitivity
  • -160dBm tracking sensitivity
  • 2.5m CEP autonomous position accuracy
  • 26s cold start TTFF
  • 1s hot start TTFF
  • 46mA acquisition, 22mA tracking current
  • UART, I2C, DDC interfaces
  • u-blox 7 engine
  • RTC crystal for faster hot starts

Applications

  • Automotive navigation and telematics
  • Fleet management and tracking
  • Industrial asset tracking
  • Timing synchronization
  • Marine navigation
Product Introduction: UBX-G7020-KT Product Introduction

The UBX-G7020-KT from u-blox is a standalone multi-GNSS receiver module based on the u-blox 7 engine, supporting GPS, GLONASS, and QZSS constellations with 56 acquisition and 22 tracking channels. The suffix KT indicates the LCC package with tape and reel packaging. With -162dBm hot start sensitivity, -160dBm tracking sensitivity, and 2.5m CEP autonomous accuracy, it delivers reliable positioning for automotive and industrial applications. The low 22mA tracking current enables power-efficient continuous operation. Standard u-blox protocol over UART/I2C ensures easy integration with existing designs.

Working Principle: UBX-G7020-KT Working Principle

The UBX-G7020 operates through four subsystems: (1) RF Front-End: An LNA amplifies the GPS L1 (1575.42MHz) and GLONASS L1 (1602MHz) signals from the external antenna. A mixer downconverts the RF to IF for digitization. (2) Baseband Processing: The u-blox 7 correlator engine tracks up to 22 satellite channels simultaneously across GPS, GLONASS, and QZSS constellations. Multi-GNSS operation increases satellite availability and improves position accuracy, especially in urban canyons. (3) Navigation Processor: An embedded ARM processor computes position, velocity, and time (PVT) solutions at up to 10Hz update rate. It applies atmospheric correction models and satellite health data from the broadcast ephemeris. (4) Interface: Results are output via UART (9600-460800 baud) using standard NMEA sentences or proprietary u-blox binary protocol. I2C/DDC provides an alternative interface for embedded hosts.

Pin Description: UBX-G7020-KT Pin Definition and Functions
Pin Name Type Description
1-2 GND Power Ground
3 VCC Power Supply voltage (1.8-3.6V)
4 VBCKP Power Backup supply for RTC (1.5-3.6V)
5 TXD1 Output UART transmit data
6 RXD1 Input UART receive data
7 SCL I/O I2C/DDC clock
8 SDA I/O I2C/DDC data
9 RF_IN RF GNSS antenna input (50 Ohm)
Application Scenarios: In which products and applications is UBX-G7020-KT used
  • Automotive navigation with GPS+GLONASS dual constellation for urban canyon reliability
  • Fleet management asset tracking with 22mA low-power continuous tracking mode
  • Industrial timing synchronization using GPS disciplined 1PPS output
  • Marine navigation with 2.5m CEP autonomous accuracy and -160dBm sensitivity
Alternative Models: What chips are recommended as replacements for UBX-G7020-KT
Model Manufacturer GNSS Accuracy Notes
NEO-M9N u-blox GPS/GLO/GAL/BDS 1.5m Newer, more constellations
MAX-M10S u-blox GPS/GLO/GAL/BDS 1.5m Smaller, ultra-low power
LC29H(DA) Quectel GPS/GLO/GAL/BDS 1.5m Alternative vendor
MT3339 MediaTek GPS 3.0m Lower cost, GPS only

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1