Opens in a new tab

ULN2803ADWR

8-ch Darlington driver, 500mA/ch, SOIC-18

7797

Effective Inventory

Image for reference only

Manufacturer Part:

ULN2803ADWR

Package:

SOIC-18 (11.5 x 7.5 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ULN2803ADWR from Texas Instruments is an 8-channel Darlington transistor array with 500mA per channel and built-in clamp diodes in an 18-pin SOIC package. The DW denotes SOIC-18, R denotes tape and reel. Designed for 5V TTL/CMOS interface, it drives relays, solenoids, stepper motors, and lamps directly from logic-level inputs.

Key Specifications

Channels 8 Darlington pairs
Output Current 500mA per channel
VCE(sat) 1.1V typical @ IC=350mA
hFE 1000 min @ IC=350mA
Input Compatible 5V TTL/CMOS
Clamp Diodes Yes (all 8 channels)
Input Resistor 2.7kOhm (series base resistor)
Operating Voltage Up to 50V (output)
Operating Temp -40 to +85 C
Package SOIC-18 (wide, 1.27mm pitch)

Features

  • 8-channel Darlington driver array
  • 500mA per channel with 1A peak
  • Built-in clamp diodes for inductive loads
  • 2.7kOhm input resistors for 5V logic interface
  • 50V output voltage capability
  • 1.1V low saturation voltage at 350mA

Applications

  • Relay and solenoid drivers
  • Stepper motor driving
  • Lamp and LED displays
  • High-voltage logic interface
Product Introduction: ULN2803ADWR Product Introduction

The ULN2803ADWR from Texas Instruments is an 8-channel Darlington transistor array with 500mA per channel and built-in clamp diodes in an 18-pin SOIC package. The DW denotes SOIC-18, R denotes tape and reel. Designed for 5V TTL/CMOS interface, it drives relays, solenoids, stepper motors, and lamps directly from logic-level inputs.

Working Principle: ULN2803ADWR Working Principle

The ULN2803ADWR operates as described in the product overview. Key subsystems include the input stage, processing/gain stage, output stage, and protection circuitry as detailed in the datasheet.

Pin Description: ULN2803ADWR Pin Definition and Functions
Pin Name Type Description
1-8 IN1-IN8 Input Logic inputs (5V TTL/CMOS)
9 GND Power Ground
10-17 OUT8-OUT1 Output Darlington outputs (open-collector)
18 COM Output Clamp diode common (connect to supply)
Application Scenarios: In which products and applications is ULN2803ADWR used
  • Relay and solenoid drivers
  • Stepper motor driving
  • Lamp and LED displays
  • High-voltage logic interface
Alternative Models: What chips are recommended as replacements for ULN2803ADWR
Model Manufacturer Package Notes
ULN2803AN TI DIP-18 Through-hole version
TBD62083AFWG Toshiba SSOP-18 DMOS, lower VCEsat
MC1413DG onsemi SOIC-16 7-channel version
ULN2003ADWR TI SOIC-16 7-channel version

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1