Opens in a new tab

USB2412-DZK

2-port USB 2.0 Hi-Speed hub controller, STT, 3.3V, 28-QFN

4817

Effective Inventory

Image for reference only

Manufacturer Part:

USB2412-DZK

Package:

28-QFN (5×5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Microchip USB2412-DZK is a low-power, single Transaction Translator (STT) USB 2.0 Hi-Speed hub controller with two downstream ports in a 28-pin QFN (5×5 mm) package. Designed for embedded USB applications, it supports low-speed, full-speed, and high-speed downstream devices. The device features fully integrated USB termination and pull-up/pull-down resistors, an on-chip 24MHz crystal driver, built-in default configuration requiring no external components, and 4kV HBM ESD protection on all pins. It operates from a single 3.3V supply with internal 1.2V regulators over the commercial temperature range of 0°C to +70°C.

Key Specifications

USB Standard USB 2.0 Hi-Speed
Downstream Ports 2
Transaction Translator Single (STT)
Supply Voltage 3.3V (3.0V to 3.6V)
Operating Current 65mA typical
ESD Protection 4kV HBM on all pins
PHYBoost Yes
Operating Temperature 0°C to +70°C
Package 28-QFN (5×5 mm)

Features

  • Ultra low-power, small footprint 2-port USB 2.0 hub controller
  • Fully compliant with USB 2.0 specification
  • Fully integrated USB termination and pull-up/pull-down resistors
  • Single 3.3V supply with internal 1.2V core regulators
  • On-chip 24MHz crystal driver or external clock input
  • 4kV HBM ESD protection on all pins (powered and unpowered)
  • Built-in default configuration, no external components required
  • Downstream port configurable as non-removable
  • Compound device support on per-port basis
  • PortMap and PortSwap flexibility

Applications

  • 3G/4G/Cable/DSL modems
  • LCD monitors and TVs
  • Multi-function printers
  • Set-top boxes and DVRs
  • HDD enclosures and KVM switches
  • Point-of-Sale (POS) systems
Product Introduction: USB2412-DZK Product Introduction

The Microchip USB2412-DZK is a low-power, single Transaction Translator (STT) USB 2.0 hub controller IC with two downstream ports designed for embedded USB applications. It supports low-speed, full-speed, and high-speed downstream devices on all enabled ports. Optimized for minimal bill-of-material and low-cost designs, the USB2412 features fully integrated USB termination, built-in default configuration requiring no external setup, and 4kV ESD protection. The device is ideal for expanding USB connectivity in space-constrained embedded systems.

Working Principle: USB2412-DZK Working Principle

The USB2412-DZK operates as a USB 2.0 hub between a single upstream host port and two downstream device ports. 1) Upstream Port Subsystem: Connects to the USB host via D+ and D- differential pair, supporting Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps) signaling. 2) Transaction Translator Subsystem: The single TT converts high-speed split transactions from the upstream port into full-speed or low-speed transactions for downstream devices, enabling mixed-speed device operation. 3) Downstream Port Subsystem: Two ports with integrated termination and PHYBoost for signal quality optimization, each supporting connect/disconnect detection. 4) Configuration Subsystem: Built-in default configuration eliminates the need for external EEPROM or ROM; PortMap and PortSwap features allow flexible pin assignment routing.

Pin Description: USB2412-DZK Pin Definition and Functions
Pin Name Type Function
1 VDD33 Power 3.3V supply
2-3 DM1/DP1 I/O Downstream port 1 data
4-5 DM2/DP2 I/O Downstream port 2 data
6-7 PRTCTL1/2 I/O Port power control
8 VDD18 Power 1.2V internal core supply (decoupling)
9-10 DP0/DM0 I/O Upstream port data
11 XTAL1 Input 24MHz crystal input
12 XTAL2 Output 24MHz crystal output
13-28 VDD/GND/CFG Power/Config Power, ground, and configuration pins
Application Scenarios: In which products and applications is USB2412-DZK used
  • Consumer Electronics: LCD monitors, TVs, and set-top boxes with embedded USB expansion
  • Networking: Cable/DSL modems and routers requiring additional USB ports
  • Storage: HDD enclosures with USB hub functionality
  • Retail: Point-of-Sale (POS) terminals with multiple USB peripherals
  • Industrial: KVM switches and server front panels
Alternative Models: What chips are recommended as replacements for USB2412-DZK
Manufacturer Part Number Package Notes
Microchip USB2422 QFN-28 2-port USB 2.0 hub, MTT variant
Microchip USB2514 QFN-36 4-port USB 2.0 hub controller
TI TUSB2046B LQFP-32 4-port USB 2.0 hub
NXP ISP1520 LQFP-48 USB 2.0 hub controller
Genesys GL850G SSOP-28 4-port USB 2.0 hub

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1