Opens in a new tab

USB2514BI-AEZG

4-port USB 2.0 Hi-Speed hub, MultiTRAK, PHYBoost, QFN-36 (6x6mm), SMBus config

6637

Effective Inventory

Image for reference only

Manufacturer Part:

USB2514BI-AEZG

Package:

QFN-36 (6.00 x 6.00 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The USB2514BI-AEZG from Microchip Technology is a 4-port USB 2.0 Hi-Speed hub controller in a 36-pin QFN (6x6mm) package. Supporting MultiTRAK, PortMap, PortSwap, and PHYBoost features, it provides flexible USB expansion for embedded and consumer devices.

Key Specifications

Ports 4 downstream + 1 upstream
Speed 480 Mbps (Hi-Speed)
Supply Voltage 3.3 V
Configuration I2C EEPROM or SMBus
Operating Temperature -40C to +85C

Features

  • 4 downstream USB 2.0 Hi-Speed ports
  • MultiTRAK per-port transaction translator
  • PortMap for flexible port assignment
  • PHYBoost for adjustable signal drive strength
  • Battery Charging Support (BCS v1.2)
  • I2C EEPROM or SMBus configuration

Applications

  • USB hub expansion in monitors and docking stations
  • Embedded USB port expansion
  • Industrial USB hub modules
  • Consumer electronics with multiple USB ports
Product Introduction: USB2514BI-AEZG Product Introduction

The USB2514BI-AEZG from Microchip Technology is a 4-port USB 2.0 Hi-Speed hub controller in a 36-pin QFN (6x6mm) package. The device supports USB 2.0 Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps) on all ports. MultiTRAK technology provides per-port transaction translators, preventing a Full-Speed device on one port from affecting Hi-Speed performance on other ports. PortMap allows flexible port assignment for custom PCB layouts, and PortSwap allows D+/D- pin swapping. PHYBoost provides adjustable USB signal drive strength for long PCB traces. Battery Charging Support (BCS v1.2) enables downstream port charging of mobile devices. Configuration is via I2C EEPROM or SMBus slave interface. The device operates from 3.3V with -40C to +85C industrial temperature range.

Working Principle: USB2514BI-AEZG Working Principle

The USB2514BI-AEZG implements a USB 2.0 hub with advanced features. (1) Upstream Port: The upstream facing port connects to the host controller and enumerates as a hub device. It supports Hi-Speed (480Mbps) and Full-Speed (12Mbps) operation. (2) Downstream Ports: Four downstream facing ports connect to USB devices. Each port supports Hi-Speed, Full-Speed, and Low-Speed. (3) Transaction Translator: MultiTRAK provides four independent transaction translators (one per port), allowing simultaneous Hi-Speed upstream communication while serving Full-Speed devices on individual ports. Without MultiTRAK, a single TT would serialize all Full-Speed traffic. (4) Repeater: In Hi-Speed mode, the hub operates as a high-speed repeater, forwarding packets between upstream and downstream with minimal latency. (5) Configuration: On power-up, the device reads configuration from an I2C EEPROM or receives configuration from an SMBus master, setting VID/PID, port mapping, and PHYBoost levels.

Pin Description: USB2514BI-AEZG Pin Definition and Functions
Pin Group Name Type Function
1-4 DM0/DP0 Analog Port 0 USB differential pair
5-12 DM1-3/DP1-3 Analog Port 1-3 USB differential pairs
13-16 DMU/DPU Analog Upstream USB differential pair
17-24 SMB/I2C I/O Configuration interface
25-30 VDD/GND Power 3.3V supply and ground
31-36 CFG/TEST I/O Configuration straps and test pins
Application Scenarios: In which products and applications is USB2514BI-AEZG used
  • USB hub expansion in monitors and docking stations with MultiTRAK
  • Embedded USB port expansion with PHYBoost for long traces
  • Industrial USB hub modules with SMBus remote configuration
  • Consumer electronics with battery charging support on downstream ports
Alternative Models: What chips are recommended as replacements for USB2514BI-AEZG
Manufacturer Part Number Package Notes
Microchip USB2514B-AEZG QFN-36 Commercial temp version
Microchip USB2517I-AEZG QFN-48 7-port version
TI TUSB2046BVFR LQFP-32 4-port USB 2.0 hub
NXP ISP1520BD LQFP-48 USB 2.0 Hi-Speed hub

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1