Opens in a new tab

USB3320C-EZK

Hi-Speed USB 2.0 ULPI PHY, 480Mbps, integrated ESD/OVP, QFN-32

11536

Effective Inventory

Image for reference only

Manufacturer Part:

USB3320C-EZK

Package:

QFN-32 (5×5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Microchip USB3320C-EZK is a Hi-Speed USB 2.0 ULPI transceiver (PHY) in a 32-pin QFN package. It provides a configurable physical layer solution for USB 2.0 host, device, and OTG applications. Featuring integrated ESD protection (up to 30V on VBUS), flexPWR sleep mode, and an integrated battery-to-3.3V regulator, it minimizes external BOM components and PCB area. The device supports flexible reference clock frequencies and is rated for operation from -40°C to +85°C.

Key Specifications

USB Standard USB 2.0 Hi-Speed (480Mbps)
Interface ULPI
Data Rate 480 Mbps
Supply Voltage 3.0V to 3.6V
ESD Protection Up to 30V on VBUS
Reference Clock User selectable (crystal or external)
OTG Support HNP and SRP
Operating Temperature -40°C to +85°C
Package QFN-32

Features

  • Hi-Speed USB 2.0 ULPI transceiver with 480Mbps data rate
  • Integrated ESD protection circuits eliminate external ESD components
  • Internal over-voltage protection (OVP) up to 30V
  • flexPWR technology with sleep mode tri-stating all ULPI pins
  • Integrated battery-to-3.3V regulator
  • Wrapperless design for optimal timing performance
  • Smart detection for USB charger, headset, and data cable identification
  • Headset audio mode support
  • UART mode for non-USB serial data transfer
  • 5V cable short-circuit protection on ID, DP, DM lines

Applications

  • Smartphones and tablets
  • Embedded USB host and device designs
  • USB OTG peripherals
  • Industrial communication and networking equipment
  • Medical devices and imaging equipment
  • Computers and computer peripherals
Product Introduction: USB3320C-EZK Product Introduction

The Microchip USB3320C-EZK is a highly integrated, full-featured Hi-Speed USB 2.0 ULPI transceiver based on Microchip’s proven ULPI interface technology. It provides a configurable physical layer (PHY) solution for a wide variety of products requiring USB connectivity. The reference clock frequency is user selectable, and the device includes an internal oscillator compatible with quartz crystals or ceramic resonators. Outstanding ESD robustness eliminates the need for external ESD protection devices in typical applications. The internal over-voltage protection circuit protects the device from voltages up to 30V on the VBUS pin. The integrated battery-to-3.3V regulator and flexPWR sleep mode further reduce BOM cost and power consumption.

Working Principle: USB3320C-EZK Working Principle

The USB3320C-EZK operates as the physical layer interface between a USB controller (link layer) and the USB cable. 1) ULPI Interface Subsystem: A 12-pin ULPI bus connects to the USB link controller, transferring data at 8-bit/60MHz or 4-bit/30MHz for full and high-speed operation. 2) USB PHY Core Subsystem: Performs NRZI encoding/decoding, bit stuffing/unstuffing, and serial-to-parallel conversion for USB 2.0 data rates up to 480Mbps. 3) Analog Front-End Subsystem: Contains the high-speed differential transceivers for D+ and D- lines, with integrated pull-up/pull-down resistors and ESD protection circuits. 4) Power Management Subsystem: The integrated regulator converts battery voltage to 3.3V for PHY operation, while flexPWR sleep mode reduces power by tri-stating ULPI pins and entering a low-current state.

Pin Description: USB3320C-EZK Pin Definition and Functions
Pin Name Type Function
1 VDD18 Power 1.8V core supply output
2-9 DATA[7:0] I/O ULPI data bus
10 CLKOUT/CLKIN I/O 60MHz ULPI clock
11 STP Input ULPI stop signal
12 DIR Output ULPI direction signal
13 NXT Output ULPI next signal
14 RST# Input Active-low reset
15 VBUS I/O USB VBUS detect/drive
16-17 DP/DM I/O USB data plus/minus
18 ID Input USB OTG ID pin
19 VBAT Power Battery supply input
20-32 VDD/GND/CFG Power/Config Power, ground, and configuration pins
Application Scenarios: In which products and applications is USB3320C-EZK used
  • Mobile Devices: Smartphones and tablets with USB OTG connectivity
  • Embedded Systems: USB host/device interfaces in industrial controllers
  • Communications: Networking equipment and modems with USB 2.0 ports
  • Medical Equipment: Imaging and diagnostic devices requiring USB data transfer
  • Consumer Electronics: Audio/video devices with USB connectivity
Alternative Models: What chips are recommended as replacements for USB3320C-EZK
Manufacturer Part Number Package Notes
TI TUSB1210 QFN-32 USB 2.0 ULPI PHY, similar function
Silicon Labs CP2108 QFN-64 USB 2.0 hub bridge, different architecture
NXP ISP1507 QFN-32 USB 2.0 ULPI PHY, OTG support
Microchip USB3340 QFN-32 USB 2.0 ULPI PHY with different clock options
ST STUSB1602 QFN-24 USB Type-C PHY, different interface

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1