Opens in a new tab

V20E275P

20mm MOV Varistor, 275VAC, 10kA Surge, 710V Clamp, Radial Lead

456

Effective Inventory

Image for reference only

Manufacturer Part:

V20E275P

Package:

Disc 20mm, Radial Leads (7.5mm lead spacing)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The V20E275P from Littelfuse is a 20 mm UltraMOV metal oxide varistor (MOV) rated for 275 VAC / 350 VDC continuous operation with 10 kA surge current rating, designed for AC line transient voltage suppression.

Key Specifications

Type Metal Oxide Varistor (MOV), UltraMOV Series
Continuous AC Voltage (VM(AC)) 275 VAC RMS
Continuous DC Voltage (VM(DC)) 350 VDC
Varistor Voltage (VNOM) 387 V to 473 V @ 1mA DC
Clamping Voltage (VC) 710 V @ 100 A (8/20us)
Peak Surge Current (ITM) 10,000 A (8/20us, single pulse)
Energy Rating (WTM) 190 J (2ms square wave)
Capacitance 900 pF @ 1 MHz
Diameter 20 mm disc, radial leads
Operating Temperature -55C to +85C

Features

  • 10 kA peak surge current rating
  • 190 J energy absorption capability
  • UL 1449 recognized
  • IEC 61051 certified
  • Halogen-free and RoHS compliant
  • Laser-branded for identification
  • Bidirectional protection

Applications

  • AC power line surge protection (SPD)
  • UPS transient suppression
  • Industrial equipment overvoltage protection
  • AC power meters and distribution panels
Product Introduction: V20E275P Product Introduction

The V20E275P from Littelfuse is a 20 mm epoxy-coated UltraMOV metal oxide varistor designed for high-energy transient voltage suppression on AC power lines. The device is rated for 275 VAC RMS continuous operation with a varistor voltage range of 387-473 V and clamps transients at 710 V under 100 A surge current. The 10 kA single-pulse surge current rating and 190 J energy absorption capability provide robust protection against lightning and switching transients. The bidirectional nature of the MOV clamps both positive and negative overvoltage events. UL 1449 recognized and IEC 61051 certified for safety compliance.

Working Principle: V20E275P Working Principle

The V20E275P uses a polycrystalline zinc oxide (ZnO) ceramic body with intergranular boundaries that exhibit nonlinear current-voltage characteristics. Under normal operating voltage (below the varistor voltage), the device presents very high impedance (essentially an open circuit) with only microampere-level leakage current. When a transient voltage exceeds the varistor voltage, the ZnO grain boundaries undergo avalanche breakdown, causing the impedance to drop dramatically. This shunts the transient current away from the protected circuit while clamping the voltage to approximately 710 V. After the transient subsides, the device returns to its high-impedance state. The 20 mm disc provides sufficient thermal mass to absorb the 190 J of energy during a 2 ms transient event without degradation. The epoxy coating provides electrical insulation and mechanical protection while meeting UL 2500 V isolation requirements.

Pin Description: V20E275P Pin Definition and Functions
Pin Name Type Function
1 Lead 1 Terminal Connection to protected line
2 Lead 2 Terminal Connection to neutral/ground
Application Scenarios: In which products and applications is V20E275P used
  • 230VAC power inlet surge protection in industrial equipment
  • UPS AC input and output transient suppression
  • Surge protection device (SPD) module for distribution panels
  • AC power meter overvoltage protection
Alternative Models: What chips are recommended as replacements for V20E275P
Manufacturer Part Number Package Notes
Littelfuse V14E275P 14mm disc Same voltage, lower surge (6kA)
Littelfuse V20E250P 20mm disc 250VAC variant
TDK B72220S0271K101 20mm disc 275VAC MOV, similar specs
EPCOS/TDK S20K275 20mm disc 275VAC MOV equivalent
Bourns MOV-20D431KTR 20mm disc 275VAC rated MOV

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1