Opens in a new tab

VIPER22ADIP-E

Low-power offline SMPS primary switcher with integrated 730V MOSFET, 20W, DIP-8, fixed 60kHz

5219

Effective Inventory

Image for reference only

Manufacturer Part:

VIPER22ADIP-E

Package:

DIP-8 (10.16 x 7.11 x 4.95 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The VIPER22ADIP-E from STMicroelectronics is a low-power offline SMPS primary switcher that integrates a dedicated current-mode PWM controller with a high-voltage power MOSFET on a single silicon chip. Packaged in an 8-pin DIP format, it operates from 195VAC to 265VAC with a fixed 60kHz switching frequency and delivers up to 20W output power, making it well-suited for battery charger adapters and standby power supplies.

Key Specifications

Input Voltage Range 195VAC to 265VAC
Output Power (195-265VAC) 20W (DIP-8)
Output Power (85-265VAC) 12W (DIP-8)
Switching Frequency 60kHz (fixed)
VDD Voltage Range 9V to 38V
MOSFET Breakdown Voltage 730V (min)
Drain Current (nom) 0.7A
VDD On Threshold 14.5V (typical)
VDD Off Threshold 8V (typical)
Operating Temperature -40°C to +150°C
Package DIP-8

Features

  • Integrated PWM controller and 730V MOSFET
  • Fixed 60kHz switching frequency
  • Current mode control with auxiliary UVLO and hysteresis
  • High-voltage start-up current source from drain pin
  • Overtemperature, overcurrent, and overvoltage protection with auto-restart
  • Automatic burst mode at low load conditions
  • Hiccup mode overvoltage protection

Applications

  • Battery charger adapters
  • TV and monitor standby power supplies
  • Auxiliary power supplies for motor control
  • Consumer electronics power supplies
  • Industrial low-power SMPS
Product Introduction: VIPER22ADIP-E Product Introduction

The VIPER22ADIP-E is an offline switching power supply IC from STMicroelectronics that combines a current-mode PWM controller and a 730V high-voltage power MOSFET on the same silicon die. This integration dramatically reduces component count and simplifies SMPS design. The device features a fixed 60kHz oscillator, undervoltage lockout with hysteresis on the VDD pin, and a high-voltage start-up current source connected to the drain. Protection features include overcurrent, overtemperature, and overvoltage protection with automatic restart. Under light-load conditions, the device enters burst mode to minimize standby power consumption. The DIP-8 package enables up to 20W output power at 195-265VAC input.

Working Principle: VIPER22ADIP-E Working Principle

The VIPER22ADIP-E operates in current-mode control. At startup, a high-voltage current source from the drain pin charges the external VDD capacitor. When VDD reaches the turn-on threshold (14.5V typical), the start-up current source switches off and the internal MOSFET begins switching at 60kHz. The FB pin receives feedback current from an optocoupler on the secondary side, which sets the peak drain current through an internal 0.23V reference comparator. When VDD drops below the turn-off threshold (8V), switching stops and the start-up current source reactivates. Overvoltage on VDD triggers a hiccup latch that resets when VDD falls below VDDoff. Overcurrent protection limits peak drain current, and overtemperature detection forces auto-restart with thermal hysteresis.

Pin Description: VIPER22ADIP-E Pin Definition and Functions
Pin Name Type Description
1 SOURCE Power MOSFET source and circuit ground reference
2 SOURCE Power MOSFET source and circuit ground reference
3 FB Input Feedback input; 0-1V range sets peak drain current; short to SOURCE for max current limit
4 VDD Power Supply for control circuits; charged by HV start-up source; monitored by UVLO and OVP
5-8 DRAIN Power MOSFET drain; also input for HV start-up current source
Application Scenarios: In which products and applications is VIPER22ADIP-E used
  • Battery Charger Adapters: Provides complete offline flyback converter solution for mobile phone and laptop chargers up to 20W with minimal external components
  • TV/Monitor Standby PSU: Generates standby 5V/3.3V rail with burst mode achieving low no-load consumption for energy regulations compliance
  • Motor Control Auxiliary Supply: Powers gate driver and control logic from mains in inverter and motor drive systems with robust overvoltage protection
  • Consumer Electronics: Supplies low-voltage rails in set-top boxes, DVD players, and small appliances with auto-restart fault tolerance
  • Industrial SMPS: Delivers isolated low-power output for sensors and microcontrollers in factory environments with 150°C junction rating
Alternative Models: What chips are recommended as replacements for VIPER22ADIP-E
Model Manufacturer Power VDS Key Difference
VIPER22AS-E ST 12W 730V Same die in SO-8 surface mount package
VIPER12ADIP-E ST 12W 730V Lower power version, same topology
VIPER17LDIP ST 10W 800V Higher voltage, lower power, 800V MOSFET
KA5L0380RYDTU Fairchild 38W 800V Higher power, different controller family
TOP224P Power Integrations 22W 700V Similar topology, different pinout

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1