Opens in a new tab

VNH3SP30TR-E

30A H-bridge motor driver, 45mohm, AEC-Q100, MultiPowerSO-30

5678

Effective Inventory

Image for reference only

Manufacturer Part:

VNH3SP30TR-E

Package:

MultiPowerSO-30 (15.85 x 10.5 x 4.2 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The VNH3SP30TR-E from STMicroelectronics is an automotive-qualified fully integrated H-bridge motor driver with 30A output current, 45mohm total RDS(on), and 40V supply rating in MultiPowerSO-30 package. AEC-Q100 qualified for automotive applications.

Key Specifications

Configuration Full H-Bridge
Output Current 30 A (continuous)
On-Resistance 45 mohm total (HS+LS)
Supply Voltage 5.5 V to 40 V
Logic Voltage 5V compatible
PWM Frequency Up to 10 kHz
Current Sense Analog proportional output
Thermal Shutdown Yes with hysteresis
Overcurrent Protection Yes
AEC-Q100 Yes
Package MultiPowerSO-30
Operating Temperature -40 to +150 C (TJ)

Features

  • 30A continuous output current for high-power DC motor drive
  • 45mohm total RDS(on) for high efficiency and low heat dissipation
  • Analog current sense output proportional to motor current
  • Thermal shutdown with automatic restart hysteresis
  • AEC-Q100 automotive qualified for under-hood applications

Applications

  • Automotive DC motor drive (wiper, window, seat)
  • Automotive throttle valve actuator
  • Industrial DC motor control
  • Robotics H-bridge motor driver
  • Battery-powered vehicle traction drive
Product Introduction: VNH3SP30TR-E Product Introduction

The VNH3SP30TR-E from STMicroelectronics is a fully integrated H-bridge motor driver designed for automotive applications. The device integrates two monolithic high-side drivers and two low-side switches in a full-bridge configuration, rated for 30A continuous output current with 45mohm total on-resistance. The driver operates from 5.5V to 40V supply and includes an analog current sense output proportional to motor current, thermal shutdown with hysteresis, and overcurrent protection. AEC-Q100 qualified, the device is suitable for under-hood automotive DC motor applications. The TR suffix indicates tape and reel packaging, and E suffix denotes the lead-free automotive-grade version.

Working Principle: VNH3SP30TR-E Working Principle

The VNH3SP30TR-E operates as a full H-bridge motor driver. (1) The device integrates two high-side switches (N-channel MOSFETs with charge pump gate drive) and two low-side switches in an H-bridge configuration. By controlling the INA and INB logic inputs, the motor can be driven forward, reverse, brake, or freewheeling. The PWM input enables speed control through pulse-width modulation up to 10kHz. (2) The current sense amplifier provides an analog voltage output proportional to the motor current flowing through the active high-side switch, enabling torque monitoring and overcurrent detection without an external shunt resistor. (3) Thermal shutdown activates when the junction temperature exceeds approximately 170C, disabling the outputs and asserting the diagnostic flag. The device automatically restarts when the junction cools by the hysteresis amount, providing self-protecting operation.

Pin Description: VNH3SP30TR-E Pin Definition and Functions
Pin Name Function
1-3 OUTA Bridge output A (motor terminal)
4-6 OUTB Bridge output B (motor terminal)
7-9 VCC Power supply (5.5-40V)
10 INA Input A (direction control)
11 INB Input B (direction control)
12 PWM PWM speed control input
13 CS Current sense analog output
14 EN/DIAG Enable/Diagnostic I/O
15-17 GND Power ground
18-30 GND/VCC Ground/Power (thermal)
Application Scenarios: In which products and applications is VNH3SP30TR-E used
  • Automotive DC motor drive: windshield wiper, power window, power seat
  • Automotive throttle valve actuator with current sense for position feedback
  • Industrial DC motor control with 30A capability
  • Robotics H-bridge motor driver with integrated protection
  • Battery-powered vehicle traction drive for small electric vehicles
Alternative Models: What chips are recommended as replacements for VNH3SP30TR-E
Model Manufacturer Key Difference
VNH5019ATR-E ST 30A, 60mohm, similar with diag
VNH2SP30TR-E ST Older generation, higher RDS(on)
DRV8873 TI 10A, integrated, QFN
BTN8982TA Infineon Half-bridge, 55A, NovalithIC
MC33926VW NXP 5A, automotive, half-bridge

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1