Opens in a new tab

VNH5200ASTR-E

Automotive H-bridge motor driver, 8A, 5.5-18V, VIPower M0, SO-16N

5657

Effective Inventory

Image for reference only

Manufacturer Part:

VNH5200ASTR-E

Package:

SO-16N (10.0 x 4.0 x 1.25 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STMicroelectronics VNH5200ASTR-E is a fully integrated automotive H-bridge motor driver delivering 8 A output current. Built with VIPower M0 technology, it integrates dual monolithic high-side drivers and two low-side switches in a compact SO-16N package with comprehensive diagnostics and protection.

Key Specifications

Configuration Full H-Bridge
Output Current 8 A
Supply Voltage 5.5 V to 18 V
RDS(on) (per leg) 200 mΩ typ
PWM Frequency Up to 20 kHz
Package SO-16N
Grade Automotive

Features

  • Automotive qualified, 8 A output current
  • 3 V CMOS-compatible inputs
  • Undervoltage shutdown and overvoltage clamp
  • Thermal shutdown with cross-conduction protection
  • Current and power limitation
  • Current sense output proportional to motor current
  • Protection against loss of ground and loss of VCC
  • Half-bridge operation supported

Applications

  • Automotive door lock actuators
  • li>Fan and blower motor control

  • Seat adjustment motors
  • Small DC motor driving in automotive systems
Product Introduction: VNH5200ASTR-E Product Introduction

The STMicroelectronics VNH5200ASTR-E is a cost-optimized full H-bridge motor driver intended for automotive applications requiring up to 8 A of motor drive current. Built using VIPower M0 technology, the device integrates dual monolithic high-side drivers and two low-side switches in a compact SO-16N package. The RDS(on) of 200 mΩ per leg makes it ideal for lower-power motor control tasks such as door locks, small fans, and seat adjusters. The device supports PWM operation up to 20 kHz for speed control and includes a current sense (CS) output that delivers a current proportional to the motor current for torque monitoring. Comprehensive protection features include undervoltage shutdown, overvoltage clamp, thermal shutdown with cross-conduction prevention, and output short-circuit protection.

Working Principle: VNH5200ASTR-E Working Principle

The VNH5200ASTR-E operates as a full H-bridge where two high-side and two low-side MOSFET switches control motor direction and speed. Input pins INA and INB determine motor direction through a truth table, while the CS pin provides analog current sense feedback. Each bridge leg is independently enabled via DIAGA/ENA and DIAGB/ENB pins, which also provide fault diagnostic information. The VIPower M0 technology integrates the power MOSFET with intelligent protection on the same die: thermal sensors shut down the affected channel at 170°C with a 20 K hysteresis for automatic restart, overcurrent limitation caps the output during short circuits, and cross-conduction prevention ensures that high-side and low-side switches on the same leg never conduct simultaneously. The device can also operate in half-bridge mode for driving two independent unidirectional loads.

Pin Description: VNH5200ASTR-E Pin Definition and Functions
Pin Name Type Function
1,16 GNDA Power Ground for low-side A
2,15 OUTA Output Bridge output A
3 INA Input Clockwise direction input
4,5,12 VCC Power Supply voltage
6 INB Input Counter-clockwise input
7,10 OUTB Output Bridge output B
8,9 GNDB Power Ground for low-side B
11 CS Output Current sense output
13 DIAGB/ENB I/O Diagnostic/Enable B
14 DIAGA/ENA I/O Diagnostic/Enable A
Application Scenarios: In which products and applications is VNH5200ASTR-E used
  • Automotive power door lock motor control
  • Dual washer pump motor driving
  • Seat adjustment motor control
  • HVAC flap actuator control
Alternative Models: What chips are recommended as replacements for VNH5200ASTR-E
Manufacturer Part Number Package Notes
ST VNH5180A-E PowerSSO-36 Higher current (12A)
ST VNH7100BASTR SO-16N M0-7 technology, 15A
ST VNH5050A-E PowerSSO-36 30A version
Infineon TLE9201SG TSDSO-14 Alternative H-bridge

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1