Opens in a new tab

Home » Integrated Circuits ICs » W25Q16JVUXIQ

W25Q16JVUXIQ

16Mbit serial NOR Flash, quad SPI 133MHz, 2.7-3.6V, USON-8 (2x3mm), -40 to +105°C

11203

Effective Inventory

Image for reference only

Manufacturer Part:

W25Q16JVUXIQ

Package:

USON-8 (2 x 3 x 0.6 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Winbond W25Q16JVUXIQ is a 16 Mbit (2 MB) serial NOR Flash memory with standard/dual/quad SPI interfaces, operating at up to 133 MHz in quad mode. Packaged in a compact USON-8 (2 x 3 x 0.6 mm), it supports wide voltage operation from 2.7 V to 3.6 V and is qualified for industrial temperature range (-40°C to +105°C), making it ideal for space-constrained embedded systems.

Key Specifications

Density 16 Mbit (2 MB)
Interface Standard/Dual/Quad SPI
Max Clock Frequency 133 MHz (quad)
Supply Voltage 2.7 V to 3.6 V
Operating Temperature -40°C to +105°C
Package USON-8 (2 x 3 x 0.6 mm)

Features

  • Standard, Dual, and Quad SPI interface support
  • 133 MHz clock in Quad/Dual SPI modes
  • Flexible architecture with 4 KB sectors and 64 KB blocks
  • Programmable security registers with locking
  • Sector/block/chip erase capabilities
  • Software and hardware write protection
  • Industrial temperature range: -40°C to +105°C

Applications

  • Embedded system code storage
  • IoT device firmware storage
  • Consumer electronics parameter storage
  • Wearable and portable devices
  • Industrial control system boot Flash
Product Introduction: W25Q16JVUXIQ Product Introduction

The W25Q16JVUXIQ from Winbond is a 16 Mbit serial NOR Flash memory device supporting standard SPI, Dual SPI, and Quad SPI interfaces for high-performance code and data storage. In Quad SPI mode at 133 MHz, it achieves equivalent data throughput of 532 Mbit/s, enabling XIP (execute-in-place) operation for fast boot times. The device features a flexible memory organization of 512 sectors (4 KB each), 32 blocks (64 KB each), and supports sector, block, and chip erase operations. Three 256-byte security registers with programmable locking provide secure storage for calibration data and device identification.

Working Principle: W25Q16JVUXIQ Working Principle

The W25Q16JVUXIQ communicates through a standard SPI-compatible serial interface. In standard SPI mode, four signals (CS, CLK, DI, DO) are used for command/address/data transfer. Dual SPI mode multiplexes data on DI and DO pins, and Quad SPI mode adds two additional data pins (WP and HOLD repurposed as IO2 and IO3) to achieve 4x throughput. Read operations begin with a command byte followed by 24-bit address; in Fast Read Quad mode, dummy cycles allow the address to settle before data burst. Programming operates on a page basis (256 bytes), while erasing works at sector (4 KB), block (64 KB), or chip level. Write protection is controlled through status register bits and block protect bits.

Pin Description: W25Q16JVUXIQ Pin Definition and Functions
Pin Name Type Function
1 /CS Input Chip select (active low)
2 DO (IO1) I/O Data output / Serial data 1
3 /WP (IO2) I/O Write protect / Serial data 2
4 GND Power Ground
5 DI (IO0) I/O Data input / Serial data 0
6 CLK Input Serial clock
7 /HOLD (IO3) I/O Hold / Serial data 3
8 VCC Power Power supply (2.7-3.6V)
Application Scenarios: In which products and applications is W25Q16JVUXIQ used
  • MCU boot code and XIP flash for embedded systems
  • IoT device firmware update storage
  • Wearable device parameter and log storage
  • Audio and voice prompt storage in consumer devices
  • Industrial PLC program and configuration backup
Alternative Models: What chips are recommended as replacements for W25Q16JVUXIQ
Manufacturer Part Number Density Interface Notes
Macronix MX25L1606EM2I 16 Mbit SPI/QSPI Pin-compatible alternative
GigaDevice GD25Q16CEIGR 16 Mbit SPI/QSPI Domestic alternative
ISSI IS25LP016D 16 Mbit SPI/QSPI Low-power alternative
Winbond W25Q32JVUXIQ 32 Mbit SPI/QSPI Higher density, same footprint

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1