Opens in a new tab

XCF16PFSG48C

16Mbit FPGA config PROM, parallel/JTAG, 15ns, VQFP-48

2100

Effective Inventory

Image for reference only

Manufacturer Part:

XCF16PFSG48C

Package:

48-Pin VQFP (7.0 x 7.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The XCF16PFSG48C is an AMD (Xilinx) Platform Flash 16Mbit (2M x 8) in-system programmable configuration PROM for FPGA configuration storage. It supports parallel and serial (JTAG) programming with 16Mbit capacity for storing Xilinx FPGA bitstreams. Packaged in 48-pin VQFP, 0 to +70C (C-grade).

Key Specifications

Capacity 16 Mbit (2 Mbyte)
Interface Parallel / JTAG (Serial)
Access Time 15 ns (parallel)
Programming In-system (JTAG)
Supply 3.3V or 2.5V
Package VQFP-48

Features

  • 16Mbit configuration storage
  • Parallel and serial (JTAG) access
  • 15ns parallel access time
  • In-system programmable via JTAG
  • Supports Xilinx FPGA master/slave modes
  • 3.3V or 2.5V operation
  • Interior sector architecture

Applications

  • Xilinx FPGA configuration storage
  • Multi-FPGA daisy-chain configuration
  • Embedded firmware storage
  • Reconfigurable logic systems
Product Introduction: XCF16PFSG48C Product Introduction

The XCF16PFSG48C is an AMD (Xilinx) Platform Flash 16Mbit in-system programmable configuration PROM designed specifically for storing and loading Xilinx FPGA configuration bitstreams. The 16Mbit (2Mbyte) capacity is sufficient for large Virtex and Spartan FPGAs. The device supports both parallel output (for master-parallel FPGA configuration mode) and serial JTAG programming. The 15ns parallel access time enables fast FPGA configuration at system power-up. In-system programmability via JTAG allows field updates without removing the device. The device supports 3.3V or 2.5V I/O with internal 1.8V core. Multiple XCF devices can be cascaded for daisy-chain configuration of multiple FPGAs. Packaged in 48-pin VQFP rated for 0C to +70C (commercial grade).

Working Principle: XCF16PFSG48C Working Principle

The XCF16P uses a flash memory array organized as sectors for configuration data storage. In parallel mode, the FPGA controls the PROM address pins and reads configuration data from the data pins at up to 66MHz (15ns access). In serial/JTAG mode, the IEEE 1149.1 JTAG interface is used for both programming the flash array and reading data serially. The internal state machine handles programming algorithms including erase, program, and verify operations. For FPGA configuration, the PROM outputs data on the rising edge of the CLK signal from the FPGA. The DONE pin signals when all data has been read. The cascade pins allow multiple PROMs to be connected for larger bitstream storage, with the first PROM driving the cascade input of the second.

Pin Description: XCF16PFSG48C Pin Definition and Functions

48-pin VQFP with key signals: A0-A20 (address inputs for parallel mode), D0-D7 (data outputs), CLK (clock from FPGA), OE/RESET (output enable/reset), CE (chip enable), CF (cascade flag), DONE (configuration done), TDI/TDO/TCK/TMS (JTAG), VCCINT (1.8V), VCCO (2.5V/3.3V), GND. Refer to datasheet for complete 48-pin VQFP mapping.

Application Scenarios: In which products and applications is XCF16PFSG48C used
  • Xilinx Virtex/Spartan FPGA configuration storage with 16Mbit capacity
  • Multi-FPGA daisy-chain configuration with cascaded XCF PROMs
  • Field-updatable FPGA firmware via JTAG in-system programming
  • Reconfigurable logic systems with parallel fast configuration load
Alternative Models: What chips are recommended as replacements for XCF16PFSG48C
Model Manufacturer Key Difference
XCF08PFSG48C AMD 8Mbit, half capacity
XCF32PFSG48C AMD 32Mbit, double capacity
EPC16 Intel Altera config device, 16Mbit
SST39VF1601 Microchip Generic 16Mbit flash

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1