Opens in a new tab

Home » Integrated Circuits ICs » 10M02SCE144I7G

10M02SCE144I7G

10M02SCE144I7G – FPGA (Max 10)

9616

Effective Inventory

Image for reference only

Manufacturer Part:

10M02SCE144I7G

Package:

EQFP-144 (16x16mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 10M02SCE144I7G is an Intel MAX 10 FPGA with 2,000 logic elements and 108 Kbits of embedded memory. Single-supply 3.3V operation with integrated flash for instant-on configuration. 1 PLL. EQFP-144 industrial grade package. Cost-effective for glue logic, I/O expansion, and protocol bridging.

Key Specifications

Type MAX 10 FPGA
Logic Elements 2,000
Embedded Memory 108 Kbits M9K
PLLs 1
ADC Not available (S variant)
I/O Pins 101
Supply Voltage 3.3V I/O, 1.2V core
JTAG Yes
Operating Temp -40 to +100C (Industrial)
Package EQFP-144

Working Principle

MAX 10 FPGAs integrate configuration flash memory, eliminating external configuration devices. The FPGA fabric consists of Logic Array Blocks (LABs) with 10 Adaptive Logic Modules (ALMs) each. ALMs contain fracturable LUTs and two registers. M9K memory blocks support single-port, dual-port, and FIFO modes. The integrated flash provides instant-on capability (no configuration latency). Dual-purpose I/O pins support DDR3 memory interfaces at reduced rates.

Applications

  • Glue logic
  • I/O expansion
  • Protocol bridging
  • Bus interfacing
Product Introduction: 10M02SCE144I7G Product Introduction

The 10M02SCE144I7G is an Intel MAX 10 FPGA with 2,000 logic elements and 108 Kbits of embedded memory. Single-supply 3.3V operation with integrated flash for instant-on configuration. 1 PLL. EQFP-144 industrial grade package. Cost-effective for glue logic, I/O expansion, and protocol bridging.

Working Principle: 10M02SCE144I7G Working Principle

MAX 10 FPGAs integrate configuration flash memory, eliminating external configuration devices. The FPGA fabric consists of Logic Array Blocks (LABs) with 10 Adaptive Logic Modules (ALMs) each. ALMs contain fracturable LUTs and two registers. M9K memory blocks support single-port, dual-port, and FIFO modes. The integrated flash provides instant-on capability (no configuration latency). Dual-purpose I/O pins support DDR3 memory interfaces at reduced rates.

Pin Description: 10M02SCE144I7G Pin Definition and Functions
Pin Group Name Desc
I/O 101 pins User I/O
JTAG TCK/TDI/TDO/TMS Config/Debug
CLK CLK pins Dedicated clock
Application Scenarios: In which products and applications is 10M02SCE144I7G used
  • Glue logic
  • I/O expansion
  • Protocol bridging
  • Bus interfacing
Alternative Models: What chips are recommended as replacements for 10M02SCE144I7G
Model Vendor Diff
10M04SCE144I7G Intel 4K LEs

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1