Opens in a new tab

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

8500

Effective Inventory

Image for reference only

Manufacturer Part:

MMUN2211LT1G

Package:

SOT-23-3 (TO-236, SC-59)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MMUN2211LT1G is an NPN bias resistor transistor (BRT / digital transistor) from onsemi, integrating a single NPN transistor with a monolithic bias resistor network (R1 = 10kΩ, R2 = 10kΩ) in a compact SOT-23-3 package. This pre-biased transistor simplifies circuit design by eliminating external bias resistors, reducing component count and board space. It is designed for general-purpose switching and digital interface applications.

Key Specifications

Manufacturer onsemi
Type NPN Digital Transistor (BRT)
Bias Resistor R1 10kΩ (series base resistor)
Bias Resistor R2 10kΩ (base-emitter shunt resistor)
Resistor Ratio R1/R2 1
VCEO (Collector-Emitter Voltage) 50V
IC (Collector Current) 100mA
hFE (DC Current Gain) 35 min (at IC = 5mA)
VCE(sat) (Collector-Emitter Saturation) 0.3V max @ IC = 10mA
Power Dissipation 246mW
Operating Temperature -55°C to +150°C
Package SOT-23-3 (TO-236)
Budgetary Price $0.03 @ 3ku

Features

  • Integrated bias resistors: R1 = 10kΩ, R2 = 10kΩ
  • Eliminates external resistor components, reducing BOM and board space
  • 50V collector-emitter voltage rating
  • 100mA collector current capability
  • Logic-level drive compatible via integrated base resistor
  • SOT-23-3 surface-mount package
  • Low VCE(sat): 0.3V max at 10mA
  • Wide operating temperature: -55°C to +150°C
  • Equivalent to DTC114EE / MUN2211

Applications

  • GPIO signal level conversion and interface
  • Relay and LED driver circuits
  • Digital logic signal buffering
  • Microcontroller output expansion
  • General-purpose switching and driver applications
Product Introduction: MMUN2211LT1G Product Introduction

The MMUN2211LT1G is an NPN bias resistor transistor (BRT) from onsemi’s digital transistor series, integrating a single NPN switching transistor with a monolithic bias resistor network consisting of R1 = 10kΩ (series base resistor) and R2 = 10kΩ (base-emitter shunt resistor). This pre-biased configuration eliminates the need for external bias resistors, reducing component count from three (transistor + two resistors) to one, simplifying PCB layout and saving board space. The 10kΩ/10kΩ resistor values (R1/R2 ratio = 1) are optimized for direct drive from 5V logic outputs, providing appropriate base drive current while the shunt resistor ensures fast turn-off. The device is rated for 50V VCEO, 100mA collector current, and 246mW power dissipation, suitable for general-purpose switching, signal interfacing, and driver applications.

Working Principle: MMUN2211LT1G Working Principle

Bias Resistor Network

The MMUN2211LT1G integrates two resistors with the NPN transistor. R1 (10kΩ) is connected in series between the external base input pin and the internal transistor base, limiting base drive current. R2 (10kΩ) is connected between the internal base and emitter, providing a discharge path for stored base charge during turn-off and ensuring the transistor remains off when the input is floating or driven low.

Switching Operation

When a logic HIGH voltage (e.g., 5V) is applied to the input pin, current flows through R1 into the transistor base, turning it on and saturating the collector-emitter junction. The base current is approximately (VIN – VBE) / R1. When the input goes LOW, R2 provides a discharge path for the base stored charge, ensuring fast turn-off. The R1/R2 ratio of 1 provides balanced on/off switching performance for 5V logic drive.

Input Voltage Considerations

With R1 = 10kΩ, a 5V input produces approximately 430µA base current (assuming VBE = 0.7V), sufficient to drive the transistor into saturation at collector currents up to 15-20mA (hFE min = 35). For 3.3V logic, base current is reduced to approximately 260µA, supporting lower collector currents. Designers must verify saturation at their specific operating conditions.

Pin Description: MMUN2211LT1G Pin Definition and Functions
Pin Name Type Function
1 B (Base) Input Base input (connects to internal R1, driven by logic signal)
2 E (Emitter) Ground Emitter terminal (connected to ground)
3 C (Collector) Output Collector terminal (connects to load)
Application Scenarios: In which products and applications is MMUN2211LT1G used
  • GPIO signal level conversion and digital interfacing where integrated bias resistors eliminate external components
  • Relay and LED driver circuits where the pre-biased transistor directly connects to microcontroller outputs
  • Digital logic signal buffering and inversion in control systems with minimal component count
  • Microcontroller output expansion for driving multiple loads from limited I/O pins
  • General-purpose low-side switching where the single-component BRT replaces transistor + two resistors
Alternative Models: What chips are recommended as replacements for MMUN2211LT1G
Manufacturer Part Number Package Notes
Rohm DTC114EE SOT-23-3 Pin-compatible, R1=10kΩ R2=10kΩ, equivalent
onsemi MMUN2212LT1G SOT-23-3 R1=22kΩ R2=22kΩ, same family, higher resistance
onsemi MMUN2213LT1G SOT-23-3 R1=47kΩ R2=47kΩ, lower base drive current
onsemi MMUN2214LT1G SOT-23-3 R1=10kΩ R2=47kΩ, faster turn-off, lower off-state leakage
NXP PDTA114ET SOT-23-3 PNP equivalent, R1=10kΩ R2=10kΩ, complementary pair

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NUC029LAN

ARM Cortex-M0 MCU, 50MHz, 64KB Flash, 4KB SRAM, dual UART/SPI/I2C, LQFP-48

Brand: Nuvoton

Package: LQFP-48 (7.0 x 7.0 x 1.45 mm)

IN STOCK: 12385pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1