Opens in a new tab

Home » Power Management ICs (PMIC) » TLVH431AIDBZR

TLVH431AIDBZR

Adjustable precision shunt regulator, 1.24V ref, 1% A-grade, VO=1.24-18V, IK=0.1-70mA, 0.25Ohm zKA, SOT-23-3, -40 to 85C

2930

Effective Inventory

Image for reference only

Manufacturer Part:

TLVH431AIDBZR

Package:

SOT-23-3 (DBZ), 2.92 x 1.30 x 1.22 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLVH431AIDBZR is a low-voltage adjustable precision shunt regulator manufactured by Texas Instruments, featuring a 1.24 V bandgap reference with 1% initial accuracy (A grade). Housed in a compact SOT-23-3 (DBZ) surface-mount package, it supports adjustable output voltages from VREF (1.24 V) to 18 V using two external resistors. The device operates over a wide cathode current range of 100 uA to 70 mA with a typical output impedance of 0.25 Ohm, making it an excellent replacement for low-voltage Zener diodes. Compared to the widely used TL431 (2.495 V reference), the TLVH431A offers a lower reference voltage (1.24 V) and lower minimum cathode current (100 uA vs. 1 mA), enabling regulation in 3 V to 3.3 V systems. The industrial-grade version (suffix I) is specified from -40 C to +85 C.

Key Specifications

Reference Voltage (VREF) 1.24 V (typ)
Reference Voltage Tolerance (A Grade, 25 C) +/-1%
Adjustable Output Voltage Range 1.24 V to 18 V
Cathode Current Range (IK) 100 uA to 70 mA (continuous)
Minimum Cathode Current for Regulation 60 uA (typ), 100 uA (max)
Off-State Cathode Current (IK(off)) 0.02 uA (typ), 0.1 uA (max)
Reference Input Current (Iref) 0.1 uA (typ), 0.5 uA (max)
Dynamic Impedance (|zKA|) 0.25 Ohm (typ), 0.4 Ohm (max) at f <= 1 kHz
Reference Voltage Change vs Cathode Voltage -1.5 mV/V (typ), -2.7 mV/V (max)
VREF Deviation Over Temperature (I Grade) 6 mV (typ), 20 mV (max)
Cathode Voltage (VKA, absolute max) 20 V
Cathode Current (absolute max) -25 mA to 80 mA
Reference Current (absolute max) -0.05 mA to 3 mA
Operating Junction Temperature -40 C to +85 C (I Grade)
Storage Temperature -65 C to +150 C
ESD Rating (HBM) 2000 V (Class II)
ESD Rating (CDM) 1000 V
Package SOT-23-3 (DBZ), 2.92 x 1.30 mm
Compliance RoHS, REACH, EAR99
MSL Rating Level-1-260C-UNLIM
Lead Finish NiPdAuAg / NiPdAu / Sn
Complementary Part (Alternative Pinout) TLVH432A (different SOT-23-3 pinout)

Features

  • Low-voltage operation down to 1.24 V, lower than TL431 (2.495 V) and TL1431
  • 1% initial reference voltage accuracy (A grade) for precision regulation
  • Adjustable output voltage from 1.24 V to 18 V with two external resistors
  • Wide operating cathode current range: 100 uA to 70 mA
  • Very low minimum cathode current (60 uA typ) for low-power applications
  • 0.25 Ohm typical output impedance for tight regulation
  • Sharp turn-on characteristic — ideal Zener diode replacement
  • Low reference input current: 0.1 uA typ, minimizing resistor divider error
  • Low off-state cathode current: 0.02 uA typ for minimal standby power
  • Specified over -40 C to +125 C (Q grade), -40 C to +85 C (I grade)
  • TLVH432 variant provides alternative SOT-23-3 and SOT-89 pinouts
  • Ultra-small SC-70 (DCK) package option — 40% smaller than SOT-23-3
  • AEC-Q100 qualified (Grade 1) available in Q-suffix versions

Applications

  • Adjustable voltage reference for data converters and ADC/DAC systems
  • Secondary-side regulation in isolated flyback SMPS (3 V to 3.3 V outputs) with optocoupler feedback
  • Low-leakage Zener diode replacement in on-board regulation circuits
  • Precision current limiter and constant-current sink circuits
  • Voltage monitoring and power-rail supervision in power management systems
  • Comparator with integrated 1.24 V bandgap reference
Product Introduction: TLVH431AIDBZR Product Introduction

The TLVH431AIDBZR is a low-voltage adjustable precision shunt regulator from Texas Instruments, featuring an internal 1.24 V bandgap reference with 1% initial accuracy (A grade) at 25 C. As a three-terminal device, the output voltage can be programmed to any value between VREF (1.24 V) and 18 V by using two external resistive dividers connected to the REF pin. This architecture enables flexible voltage regulation without requiring a fixed-voltage Zener diode for each target output level. The device operates from a minimum cathode current of just 60 uA (typical), significantly lower than the TL431 which requires 1 mA, making it ideal for low-power and battery-operated systems. The wide cathode current range of 100 uA to 70 mA provides substantial design margin for both biasing and load-driving scenarios. With a typical dynamic output impedance of 0.25 Ohm, the TLVH431A delivers tight voltage regulation that outperforms standard Zener diodes by an order of magnitude. The active output circuitry provides a sharp turn-on characteristic, enabling precise threshold behavior in comparator and monitoring applications. When paired with an optocoupler, the TLVH431A serves as the voltage reference and error amplifier in isolated feedback loops for 3 V to 3.3 V switching-mode power supplies, where its low reference voltage enables direct regulation of low-voltage outputs. The industrial-grade (I suffix) version is fully specified from -40 C to +85 C, while Q-suffix versions extend to +125 C with AEC-Q100 Grade 1 qualification for automotive applications.

Working Principle: TLVH431AIDBZR Working Principle

The TLVH431A operates as a precision shunt regulator through three functional subsystems:

1. Bandgap Reference and Error Amplifier: The core of the device is an internal 1.24 V bandgap voltage reference connected to the non-inverting input of a high-gain comparator. The REF pin serves as the inverting input to this comparator. When the voltage at the REF pin exceeds the internal 1.24 V reference, the error amplifier drives the output Darlington stage to sink more cathode current. Conversely, when the REF pin voltage falls below 1.24 V, the amplifier reduces cathode current. This negative feedback loop forces the REF pin to maintain 1.24 V when the device is in regulation, establishing a stable voltage reference point.

2. Adjustable Output Voltage via External Resistor Divider: When configured with two external resistors R1 (from cathode to REF) and R2 (from REF to anode), the output voltage at the cathode is determined by: VO = VREF x (1 + R1/R2) + Iref x R1. Since Iref is typically only 0.1 uA, the Iref x R1 term is negligible for resistor values below 10 kOhm, yielding VO approximately equal to VREF x (1 + R1/R2). This allows the output voltage to be set from 1.24 V (R1 = 0) up to 18 V (R1/R2 ratio permitting), providing flexibility across a wide range of applications.

3. Shunt Regulation and Dynamic Impedance: The device regulates by shunting excess current from the cathode to the anode. When the output voltage rises above the programmed setpoint, the internal Darlington pair conducts more heavily, sinking additional current and pulling the cathode voltage down. The dynamic output impedance of 0.25 Ohm (typical at f <= 1 kHz) quantifies how effectively the device maintains regulation against load current variations. In the off state (REF pin below 1.24 V), cathode current drops to just 0.02 uA (typical), minimizing power dissipation during standby conditions.

Pin Description: TLVH431AIDBZR Pin Definition and Functions
Pin No. Name Type Function
1 REF Input Reference input. Connected to the internal error amplifier inverting input. The device regulates to maintain this pin at 1.24 V relative to ANODE. A resistive divider from CATHODE to ANODE sets the desired output voltage. Reference input current is typically 0.1 uA, minimizing divider loading error.
2 CATHODE I/O Shunt current output and voltage input. In regulation, current flows into this pin and out through ANODE. The cathode voltage is the regulated output. When REF exceeds 1.24 V, cathode current increases to pull the voltage down; when REF falls below 1.24 V, cathode current decreases. Maximum continuous cathode current: 70 mA.
3 ANODE Ground Common return terminal, normally connected to circuit ground. All voltage measurements are referenced to this pin. Current flowing into the cathode exits through the anode.
Application Scenarios: In which products and applications is TLVH431AIDBZR used
  • Isolated SMPS feedback regulation: Paired with an optocoupler in the secondary side of 3 V to 3.3 V flyback converters, the TLVH431A compares a fraction of the output voltage against its 1.24 V reference and drives the optocoupler LED to close the feedback loop, enabling precise output regulation with +/-1% accuracy.
  • On-board adjustable voltage reference: Using two external resistors, the device provides a programmable reference from 1.24 V to 18 V for ADC/DAC voltage references, bias networks, or comparator thresholds without needing multiple fixed-voltage Zener diodes.
  • Low-leakage Zener replacement: With off-state current of only 0.02 uA and sharp turn-on, the TLVH431A replaces Zener diodes in applications requiring precise voltage clamping with minimal leakage and tight tolerance, such as voltage monitoring and protection circuits.
  • Precision current sink: Configured with a sense resistor at the REF pin, the device maintains a constant voltage across the resistor, establishing a precision constant-current sink for LED bias, sensor excitation, or battery charging circuits.
  • Power-rail voltage monitor: The sharp threshold at 1.24 V and low reference current make this device suitable for undervoltage and overvoltage detection when combined with a resistive divider and a pull-up resistor on the cathode.
Alternative Models: What chips are recommended as replacements for TLVH431AIDBZR
Manufacturer Part Number Package Key Notes
Texas Instruments TLVH431BIDBZR SOT-23-3 Higher precision B grade (0.5%), pin-compatible, same VREF and current range
Texas Instruments TLVH432AIDBZR SOT-23-3 Alternative SOT-23-3 pinout (CATHODE=1, REF=2 swapped vs TLVH431), same electrical specs
onsemi NCP431AIDBZR SOT-23-3 Pin-compatible, 1% A grade, 1.24 V ref, 80 mA max cathode current
Diodes Incorporated AP431A SOT-23-3 Pin-compatible shunt regulator, 1% tolerance, 1.24 V reference, 80 mA cathode current
STMicroelectronics TS431ACX SOT-23-3 Adjustable 1.24 V shunt reference, 1% grade A, pin-compatible, 30 mA cathode current
Texas Instruments TL431AIDBZR SOT-23-3 Higher reference voltage (2.495 V), same pinout, for applications needing VREF > 2.5 V

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NUC029LAN

ARM Cortex-M0 MCU, 50MHz, 64KB Flash, 4KB SRAM, dual UART/SPI/I2C, LQFP-48

Brand: Nuvoton

Package: LQFP-48 (7.0 x 7.0 x 1.45 mm)

IN STOCK: 12385pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1