Opens in a new tab

ST1S10PUR

3A synchronous buck DC-DC converter, 2.7-5.5V input, 1.5MHz, 95% efficiency, VFQFPN-8

2013

Effective Inventory

Image for reference only

Manufacturer Part:

ST1S10PUR

Package:

VFQFPN-8 (4x4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ST1S10PUR from STMicroelectronics is a 3A synchronous step-down DC-DC converter operating at 1.5MHz switching frequency. With an input range of 2.7V-5.5V and adjustable output from 0.8V to 5.5V, it achieves up to 95% efficiency in a compact VFQFPN-8 (4x4mm) package.

Key Specifications

Input Voltage 2.7V – 5.5V
Output Voltage 0.8V – 5.5V adjustable
Output Current 3A
Switching Frequency 1.5MHz
Efficiency Up to 95%
RDS(on) High-Side 120mΩ
RDS(on) Low-Side 90mΩ
Quiescent Current 1.5mA (typ)
Shutdown Current 0.1µA
Operating Temperature -40°C to +125°C
Package VFQFPN-8 (4x4mm)

Features

  • 3A output current with integrated power MOSFETs
  • 1.5MHz switching frequency for small external components
  • Up to 95% peak efficiency
  • 0.1µA shutdown current for battery life preservation
  • Internal soft-start and current limit protection
  • 100% duty cycle operation in dropout

Applications

  • Portable device power management
  • SSD and storage systems
  • Set-top box and digital TV
  • Point-of-load regulation from 3.3V/5V rails
Product Introduction: ST1S10PUR Product Introduction

The ST1S10PUR is a 3A synchronous step-down DC-DC converter from STMicroelectronics featuring integrated P-channel/N-channel power MOSFETs. Operating at a fixed 1.5MHz switching frequency, it enables the use of tiny inductors and capacitors, resulting in a compact solution footprint. The device accepts input voltages from 2.7V to 5.5V and delivers an adjustable output from 0.8V to 5.5V at up to 3A, achieving peak efficiency of 95%.

Working Principle: ST1S10PUR Working Principle

The ST1S10PUR employs a pulse-width modulation (PWM) control architecture with a fixed 1.5MHz oscillator. The high-side P-channel MOSFET and low-side N-channel MOSFET are alternately switched to transfer energy from input to output through an external inductor. The feedback network compares a fraction of the output voltage with an internal 0.8V reference, adjusting the duty cycle to maintain regulation. In dropout conditions, the high-side MOSFET can operate at 100% duty cycle. Internal soft-start limits inrush current, while cycle-by-cycle current limit and thermal shutdown provide robust fault protection.

Pin Description: ST1S10PUR Pin Definition and Functions
Pin Name Description
1 VIN Input supply voltage (2.7-5.5V)
2 EN Enable input (active high)
3 FB Feedback voltage input
4 COMP Error amplifier compensation
5 AGND Analog ground
6 PGND Power ground
7 SW Switching node (inductor connection)
8 BOOT Bootstrap capacitor connection
Pad GND Exposed thermal pad (ground)
Application Scenarios: In which products and applications is ST1S10PUR used
  • 3.3V to 1.2V/1.8V point-of-load conversion in portable devices
  • SSD and flash storage power management
  • Set-top box and digital TV core power rails
  • Battery-powered portable equipment regulation
Alternative Models: What chips are recommended as replacements for ST1S10PUR
Model Manufacturer Vin Iout Frequency
ST1S14PHR ST 2.7-5.5V 4A 1.5MHz
TPS62130 TI 3-17V 3A 2.5MHz
BD9E102FJ Rohm 2.7-5.5V 2A 1MHz
AP63203 Diodes Inc 3.5-18V 2A 1.1MHz

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1