Opens in a new tab

1N5359B-TP

24V 5W Zener diode, +/-5%, DO-15 axial, 3.5 Ohm ZZT

3518

Effective Inventory

Image for reference only

Manufacturer Part:

1N5359B-TP

Package:

DO-15 (T-18) Axial – 8.5mm body length, 3.9mm body diameter

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 1N5359B-TP is a 24V, 5W axial-leaded Zener voltage regulator diode manufactured by Micro Commercial Components (MCC), part of the JEDEC-registered 1N5333B through 1N5388B series. With +/-5% tolerance (B suffix), this device provides wide operating current and temperature range voltage regulation in a DO-15 (T-18) glass-encapsulated axial package, suitable for power supply regulation, voltage reference, and surge protection applications.

Key Specifications

Zener Voltage (Nominal) 24V
Tolerance +/-5% (B suffix)
Power Dissipation 5.0W @ TL<25degC
Max Zener Impedance (ZZT) 3.5 Ohms
Max Reverse Leakage 500 nA @ VR=18.2V
Forward Voltage (Max) 1.2V @ IF=1A
Operating Temperature -55degC to +200degC (TJ)
Package DO-15 (T-18) Axial

Features

  • 5W power dissipation for high-power regulation applications
  • +/-5% tolerance with +/-2% and +/-1% options available
  • Low Zener impedance of 3.5 Ohms maximum for tight regulation
  • Wide voltage selection from 3.3V to 200V across the series
  • Moisture Level 1 classification; no dry pack required

Applications

  • 24V power supply output voltage regulation and clamping
  • Overvoltage protection in industrial control circuits
  • High-power voltage reference in instrumentation
  • Surge suppressor and transient voltage clamping
  • Battery charging voltage limiting circuits
Product Introduction: 1N5359B-TP Product Introduction

The 1N5359B-TP from Micro Commercial Components is a 24V, 5W Zener voltage regulator diode in a DO-15 (T-18) axial-leaded glass package. Part of the JEDEC-registered 1N5333B-1N5388B series covering 3.3V to 200V, this device features +/-5% tolerance, a maximum Zener impedance of 3.5 Ohms, and low reverse leakage of 500 nA at 18.2V. The 5W power dissipation rating with adequate heat sinking makes it suitable for power regulation and surge suppression applications. The void-free thermosetting epoxy encapsulation meets UL94V-0 flammability requirements, and the Level 1 moisture classification eliminates the need for dry-pack storage.

Working Principle: 1N5359B-TP Working Principle

The 1N5359B-TP operates in the reverse avalanche breakdown region. When the reverse voltage across the diode exceeds 24V (within +/-5%), the device enters breakdown and conducts heavily, maintaining a relatively constant voltage across its terminals. The low Zener impedance of 3.5 Ohms ensures that the terminal voltage remains stable over a wide range of operating currents. At 24V, the breakdown is dominated by the avalanche mechanism, which has a positive temperature coefficient. The 5W power dissipation capability requires proper heat sinking through the lead frame, with the device rated for full power when lead temperature is kept below 25degC at 3/8 inch from the body. For higher ambient temperatures, power must be derated at 40 mW/degC above 25degC lead temperature.

Pin Description: 1N5359B-TP Pin Definition and Functions
Pin Name Type Function
1 Cathode Passive Positive terminal during Zener operation (marked with band)
2 Anode Passive Negative terminal during Zener operation

Note: The cathode band identifies the positive terminal during normal Zener (reverse breakdown) operation. For proper heat dissipation, maintain minimum 3/8 inch lead length from body to solder point.

Application Scenarios: In which products and applications is 1N5359B-TP used
  • 24V industrial power supply output voltage regulation and overvoltage clamping
  • Surge suppressor for protecting 24V bus logic in factory automation
  • High-power voltage reference source for precision instrumentation
  • Battery charging voltage limiting in lead-acid and Li-Ion charger designs
  • Power supply crowbar and SCR trigger voltage reference in OVP circuits
Alternative Models: What chips are recommended as replacements for 1N5359B-TP
Manufacturer Part Number Package Notes
onsemi 1N5359BG DO-15 24V 5W Zener, +/-5%, AEC-Q101
Microchip 1N5359B/TR12 DO-15 24V 5W Zener, +/-5%
ST 1N5359B DO-201 24V 5W Zener, +/-5%
Vishay 1N5359B-TAP DO-201 24V 5W Zener, +/-5%
Diodes Inc 5Z24 DO-15 24V 5W Zener, +/-5%

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1