Opens in a new tab

25LC160-I

Microchip 25-series SPI EEPROM, 16Kbit/2KB, 10MHz, 2.5-5.5V, 16B page, HW+SW WP, HOLD, 1M cycles, industrial -40~85°C, small memory

25000

Effective Inventory

Image for reference only

Manufacturer Part:

25LC160-I

Package:

8-pin PDIP/SOIC/TSSOP/DFN and 6-pin SOT-23 options (P=PDIP, SN=SOIC, ST=TSSOP, MF=DFN, MC=SOT-23)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 25LC160-I is a 16 Kbit (2 K x 8) SPI serial EEPROM from Microchip Technology, operating at 2.5 V to 5.5 V supply voltage with industrial temperature range (-40 °C to +85 °C). Part of the 25-series SPI EEPROM family, this low-density device is ideal for small parameter storage and configuration data applications where a compact, low-cost non-volatile memory solution is needed.

Organized as 2,048 bytes (2 KB), the 25LC160 features byte write and 16-byte page write capability. Write operations are self-timed with a typical cycle time of 3 ms (5 ms max). The device supports SPI modes 0,0 and 1,1 with clock frequencies up to 10 MHz (3 MHz at 2.5 V), providing fast data transfer compared to I²C alternatives.

The 25LC160 includes a hardware Write-Protect (WP) pin, software-configurable block protection (BP0, BP1) allowing protection of 1/4, 1/2, or the entire array, and a HOLD pin for pausing serial communication. With over 1 million erase/write cycles and greater than 200-year data retention, this device offers Microchip’s renowned EEPROM reliability in a compact, cost-effective package.

Key Specifications

Parameter Value
Memory Type SPI Serial EEPROM
Density 16 Kbit (2 Kbyte)
Organization 2,048 x 8 bits
Interface SPI (Modes 0,0 and 1,1)
Max Clock Frequency 10 MHz @ 5 V; 3 MHz @ 2.5 V
Operating Voltage 2.5 V to 5.5 V
Page Size 16 bytes
Page Write Time 5 ms max (typical 3 ms)
Read Current (max) 2 mA @ 5.5 V
Standby Current (max) 5 µA
Write Protect Hardware WP pin + software block protection
Block Protection BP0, BP1 (protect 1/4, 1/2, all, or none)
HOLD Function Yes (/HOLD pin)
Sequential Read Yes (entire array)
Endurance 1,000,000 erase/write cycles
Data Retention > 200 years
ESD Protection > 4,000 V
Operating Temperature -40 °C to +85 °C (industrial, I grade)
Packages Available 8-pin PDIP, SOIC, TSSOP, DFN, SOT-23-6

Features

  • 16 Kbit (2 K x 8) SPI serial EEPROM
  • Up to 10 MHz SPI clock (5 V operation)
  • SPI modes 0,0 and 1,1 supported
  • 2.5 V to 5.5 V operating voltage
  • 16-byte page write buffer
  • 5 ms max page write time
  • Block write protection (BP0, BP1)
  • Hardware Write-Protect (WP) pin
  • HOLD pin for pausing serial transfers
  • Sequential read capability
  • Self-timed auto-erase write cycle
  • Power-on reset and brown-out protection
  • Low power CMOS technology
  • 2 mA max active current, 5 µA standby
  • > 1M erase/write cycles
  • > 200-year data retention
  • Industrial temperature: -40 to +85 °C
  • Multiple small package options including SOT-23-6
  • RoHS compliant, Pb-free

Applications

  • Small configuration parameter storage
  • Sensor calibration data
  • Device ID and serial number storage
  • Consumer electronics small data storage
  • Power supply configuration
  • Display panel configuration
  • IoT node parameter storage
  • Board-level identification (ID EEPROM)
Product Introduction: 25LC160-I Product Introduction

The 25LC160-I is a 16 Kbit (2,048 x 8-bit) SPI serial EEPROM from Microchip Technology, offering compact non-volatile memory with a standard SPI interface. The -I suffix denotes industrial temperature range (-40°C to +85°C), and the LC designation indicates 2.5 V minimum operating voltage. This is one of the smaller density members of the popular 25-series SPI EEPROM family.

With 2 KB of storage, the 25LC160 is designed for applications that need to store small amounts of data such as device configuration parameters, calibration coefficients, serial numbers, manufacturing data, and user preferences. Its small size, low cost, and high reliability make it a cost-effective choice for replacing discrete parameter storage solutions.

The SPI interface supports both Mode 0 (0,0) and Mode 3 (1,1) operation with clock speeds up to 10 MHz at 5 V supply, or 3 MHz at the minimum 2.5 V supply. The 16-byte page write buffer allows efficient programming of contiguous data blocks, while sequential read enables fast dump of the entire memory array.

Write protection is provided both by a hardware Write-Protect (WP) pin and by software-configurable block protection bits (BP0, BP1) in the status register. These allow protecting none, one-quarter, one-half, or the entire memory array from accidental writes. A /HOLD pin allows pausing SPI communication without resetting the transaction, useful for multi-device bus sharing.

The device features built-in power-on reset and brown-out protection to prevent corruption during power supply transitions. With over 1 million erase/write cycles per byte and greater than 200-year data retention, the 25LC160 provides the same high reliability as Microchip’s larger EEPROM devices. Available in multiple package options including the space-saving SOT-23-6 package for the most space-constrained designs.

Working Principle: 25LC160-I Working Principle

The 25LC160 is a low-density SPI EEPROM with the same core architecture as larger 25-series devices. Key operation:

1. Memory Array: 2,048 bytes (16 Kbit) of EEPROM memory organized as 2K x 8 bits. Each byte can be individually written (with auto-erase) or written as part of a 16-byte page. Data is stored in floating-gate CMOS EEPROM cells, non-volatile for >200 years.

2. SPI Interface: Standard 4-wire SPI (/CS, SCK, SI, SO). Supports Mode 0 and Mode 3. Max clock: 10 MHz at 5V, 3 MHz at 2.5V.

3. Instruction Set: READ, WRITE, WREN, WRDI, RDSR, WRSR. No page/sector/chip erase instructions on this small device (write handles auto-erase).

4. Status Register: WIP, WEL, BP0, BP1, WPEN bits. Block protection levels protect 0, 1/4, 1/2, or all of the 2KB array.

5. Power: 2 mA active (read), 5 µA standby. POR and brown-out protection.

Pin Description: 25LC160-I Pin Definition and Functions
Pin # Pin Name Type Description
1 /CS Input Chip Select, active low. Pull to GND to enable device.
2 SO Output Serial Data Output. Tri-stated when /CS high.
3 /WP Input Write Protect, active low. Hardware protection for status register when WPEN=1.
4 Vss Ground Ground supply.
5 SI Input Serial Data Input. Instructions, addresses, data in.
6 SCK Input Serial Clock input from master.
7 /HOLD Input Hold, active low. Pauses SPI communication.
8 Vcc Power Positive supply: 2.5 V to 5.5 V.

8-pin package pinout identical to other 25-series EEPROMs. Also available in 6-pin SOT-23 (reduced pins: no /WP and /HOLD). Industrial -40°C to +85°C.

Application Scenarios: In which products and applications is 25LC160-I used
  • Small Configuration Parameter Storage: Storing device configuration settings, power-on defaults, and mode parameters in consumer and industrial devices where only a few hundred bytes of non-volatile storage are needed.
  • Sensor Calibration Data: Smart sensors storing calibration coefficients, offset values, gain factors, and sensor identification data. The 2 KB capacity easily accommodates multi-channel sensor calibration tables.
  • Device ID and Serial Number Storage: Board-level identification, asset tracking, and unique device serialization where a small EEPROM stores the serial number, MAC address, manufacturing date, and hardware revision.
  • Power Supply Configuration: Programmable power supplies, battery chargers, and DC-DC converters storing output voltage settings, current limits, and protection thresholds. Small size fits in compact power module designs.
  • Display Panel Configuration: LCD/OLED display modules storing panel timing parameters, gamma correction tables, and display identification (EDID-like data) for plug-and-play display systems.
Alternative Models: What chips are recommended as replacements for 25LC160-I
Manufacturer Part Number Density Interface Page Size Notes
Microchip 25AA160-I/SN 16 Kbit SPI 16 B 1.8V min voltage
Microchip 25LC080-I/SN 8 Kbit SPI 16 B Half density
Microchip 25LC320-I/SN 32 Kbit SPI 32 B Double density
STMicro M95160-WDW6TP 16 Kbit SPI 16 B ST M95 series
ON Semi CAT25160VI-GT3 16 Kbit SPI 16 B ON Semiconductor

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1