Opens in a new tab

3314G-1-503E

Bourns 3314 series single-turn cermet trimmer potentiometer, 50kΩ, 0.25W, 4.5mm square SMD gull-wing package, top adjust, AEC-Q200 qualified, sealed construction.

10560

Effective Inventory

Image for reference only

Manufacturer Part:

3314G-1-503E

Package:

4.5mm Square SMD (Gull Wing)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 3314G-1-503E is a single-turn cermet trimmer potentiometer from Bourns, featuring a 50kOhm resistance value in a compact 4.5mm square surface-mount package. Part of Bourns’ Trimpot 3314 series, this sealed trimming potentiometer is designed for surface-mount manufacturing processes and is compatible with standard pick-and-place equipment. The ‘G’ style features gull-wing leads for reliable solder connections and top adjustment access. With a 0.25W power rating, 210-degree adjustment angle, and AEC-Q200 automotive qualification, the 3314G-1-503E is suitable for a wide range of precision circuit adjustment applications including consumer electronics, industrial equipment, and automotive systems. Its cermet resistive element provides excellent stability and performance across temperature extremes.

Key Specifications

Parameter Value
Resistance Value 50 kOhms
Resistance Tolerance ±20%
Resistive Material Cermet
Power Rating 0.25 W (1/4 W) @ 70°C
Number of Turns 1.0 Turn (Single-Turn)
Adjustment Angle 210° nominal
Adjustment Type Top Adjustment
Temperature Coefficient ±100 ppm/°C
Contact Resistance Variation 3% or 3Ω (whichever is greater)
End Resistance 1% or 2Ω max
Resolution Infinite
Insulation Resistance 100 MΩ min @ 500 VDC
Dielectric Strength 500 VAC (1 minute)
Operating Temperature -55°C to +125°C
Mounting Type Surface Mount, Gull Wing Terminals
Package Style 4.5mm x 4.5mm Square (G Style)
Qualification AEC-Q200 Grade 1
Rotational Life 100 cycles

Features

  • Compact 4.5mm square sealed surface-mount package
  • Gull-wing lead style (G) for reliable surface-mount soldering
  • Cermet resistive element for excellent stability and wear resistance
  • Top adjustment with straight slot (3314G-1 style)
  • AEC-Q200 Qualified Grade 1 for automotive applications
  • RoHS compliant and lead-free construction
  • Compatible with vacuum pick-and-place manufacturing equipment
  • Meets EIA/EIAJ/IPC/VECI SMD standard trimmer designs
  • Wide operating temperature range: -55°C to +125°C
  • MSL-1 moisture sensitivity level for unlimited shelf life
  • Tape and reel packaging: 500 pieces per 7-inch reel

Applications

  • Consumer electronics circuit adjustment and calibration
  • Automotive electronics (AEC-Q200 qualified)
  • Industrial control and instrumentation circuits
  • Telecommunication and networking equipment
  • Power supply voltage and current trimming
  • Audio equipment gain and bias adjustments
  • Sensor signal conditioning and calibration
  • Medical device circuit trimming
Product Introduction: 3314G-1-503E Product Introduction

The 3314G-1-503E is a high-quality single-turn trimming potentiometer from Bourns’ Trimpot 3314 series, designed for precision circuit adjustment applications in surface-mount electronic assemblies. With a resistance value of 50kOhms and a compact 4.5mm x 4.5mm square footprint, this device combines space-saving design with reliable performance. The ‘G’ style features gull-wing terminations that provide robust solder joints and excellent mechanical stability on the PCB, while the top-adjust configuration allows easy access for calibration and adjustment after assembly. The cermet resistive element, composed of a ceramic-metal composite, offers superior stability, wear resistance, and temperature performance compared to carbon-based alternatives. With a temperature coefficient of ±100 ppm/°C and a wide operating temperature range of -55°C to +125°C, the 3314G-1-503E maintains consistent resistance values across extreme environmental conditions. The sealed construction with O-ring protection prevents moisture ingress and contamination, ensuring long-term reliability in harsh environments. This device is AEC-Q200 qualified (Grade 1), making it suitable for automotive applications where reliability and durability under demanding conditions are essential. The 0.25W power rating and 210-degree adjustment angle provide a good balance between power handling and adjustment range for most trimming applications. The 3314G-1-503E is compatible with standard surface-mount manufacturing processes including vacuum pick-and-place equipment and reflow soldering. It is supplied in tape and reel packaging with 500 pieces per 7-inch reel, suitable for automated assembly. With its MSL-1 moisture sensitivity level, the device has unlimited shelf life without requiring dry storage. The 3314 series trimmers are widely used in consumer electronics, automotive systems, industrial controls, telecommunications equipment, power supplies, and medical devices for circuit calibration, gain adjustment, voltage trimming, and sensor signal conditioning applications.

Working Principle: 3314G-1-503E Working Principle

A potentiometer is a three-terminal variable resistor where the third terminal (wiper) makes electrical contact with the resistive element at an adjustable position, creating a variable voltage divider. The 3314G-1-503E uses a cermet resistive element, which is a composite material made of ceramic and metal particles sintered onto a ceramic substrate. Cermet provides excellent stability, low noise, and resistance to wear compared to other resistive materials. The wiper, typically made of a precious metal alloy, makes contact with the cermet element and moves along its surface as the adjustment screw is turned. In the 3314 series, the wiper is driven by a direct-drive mechanism where a slotted rotor turns to move the wiper contact along the circular resistive element path. The adjustment angle is 210 degrees, which is less than a full 360-degree turn, providing electrical stops at both ends of the travel. When a voltage is applied across the two end terminals of the potentiometer, the wiper terminal outputs a voltage proportional to its position along the resistive element. This makes potentiometers useful for voltage division, signal level adjustment, biasing, and calibration purposes. The contact resistance variation (CRV) specification of 3% or 3Ω maximum indicates the amount of resistance variation that occurs as the wiper moves across the element due to the contact interface. The infinite resolution specification means there is theoretically no minimum step size in the resistance adjustment – it is continuously variable throughout its range. The sealed construction with O-ring seal protects the internal resistive element and wiper from environmental contaminants, moisture, and soldering flux residues during manufacturing.

Pin Description: 3314G-1-503E Pin Definition and Functions
Terminal Name Description
Terminal 1 End Terminal 1 (CW End) First end of the cermet resistive element; resistance increases as wiper moves away from this terminal in clockwise direction
Terminal 2 Wiper (W) Movable contact terminal that slides along the resistive element, providing an adjustable tap point for voltage division or variable resistance
Terminal 3 End Terminal 3 (CCW End) Second end of the cermet resistive element; opposite end of the element from Terminal 1
Application Scenarios: In which products and applications is 3314G-1-503E used
  • Power supply output voltage adjustment and current limit trimming
  • Audio equipment gain control and bias adjustment
  • Sensor calibration and signal conditioning circuits
  • Automotive electronics (AEC-Q200 qualified) – sensor trimming, control unit calibration
  • Telecommunication equipment circuit calibration
  • Industrial control and instrumentation circuits
  • Medical device calibration and precision adjustment
  • Display and backlighting brightness adjustment
  • RF circuit impedance matching and tuning
Alternative Models: What chips are recommended as replacements for 3314G-1-503E
Model Manufacturer Key Difference
3314J-1-503E Bourns Same series, J-hook (J) terminals instead of gull-wing (G), same electrical specs
3314G-1-103E Bourns Same package, 10kΩ resistance value
3314G-1-104E Bourns Same package, 100kΩ resistance value
3224W-1-503E Bourns Multi-turn trimmer, 25 turns, 0.25W, for finer adjustment
23BR50KLFTR TT Electronics/BI Similar 50kΩ single-turn SMD trimmer, alternative supplier

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1