Opens in a new tab

Home » Integrated Circuits ICs » 500021081

500021081

High-speed optocoupler, 15MBd, 5kV isolation, DIP-6

6310

Effective Inventory

Image for reference only

Manufacturer Part:

500021081

Package:

DIP-6

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 500021081 from Broadcom is a high-speed optocoupler with 15 MBd data rate and 5000 V RMS isolation voltage. It provides reliable galvanic isolation for digital communication between high-voltage and low-voltage domains in industrial and power electronics.

Key Specifications

Function High-speed optocoupler
CTR 20% min at IF=16mA
Data Rate 15 MBd
Isolation Voltage 5000 V RMS
CTR Degradation Low
Package DIP-6 (7.62×6.35mm)

Working Principle

An infrared LED on the input side emits light proportional to forward current. A photodetector IC on the output side converts the optical signal back to electrical, providing galvanic isolation rated at 5000 V RMS. The integrated detector amplifier achieves 15 MBd data rate with stable CTR over time and temperature.

Applications

  • Power supply feedback isolation
  • Industrial communication isolation
  • Motor drive signal isolation
  • Medical equipment isolation
Product Introduction: 500021081 Product Introduction

The 500021081 from Broadcom is a high-speed optocoupler with 15 MBd data rate and 5000 V RMS isolation voltage. It provides reliable galvanic isolation for digital communication between high-voltage and low-voltage domains in industrial and power electronics.

Working Principle: 500021081 Working Principle

An infrared LED on the input side emits light proportional to forward current. A photodetector IC on the output side converts the optical signal back to electrical, providing galvanic isolation rated at 5000 V RMS. The integrated detector amplifier achieves 15 MBd data rate with stable CTR over time and temperature.

Pin Description: 500021081 Pin Definition and Functions
Pin Name Description
1 ANODE LED anode
2 CATHODE LED cathode
3 NC No connect
4 VO Output
5 GND Output ground
6 VCC Output supply
Application Scenarios: In which products and applications is 500021081 used
  • Power supply feedback isolation
  • Industrial communication isolation
  • Motor drive signal isolation
  • Medical equipment isolation
Alternative Models: What chips are recommended as replacements for 500021081
Model Manufacturer Key Difference
HCPL-2531 Broadcom Dual channel

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1