Opens in a new tab

74HC244D

Octal buffer/line driver with 3-state outputs, non-inverting, 8-channel, 2.0-6.0V supply, ±7.8mA output, 10ns delay, SO20 package, 74HC CMOS logic family.

15420

Effective Inventory

Image for reference only

Manufacturer Part:

74HC244D

Package:

SO20 / SOIC-20

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 74HC244D is a high-speed CMOS octal buffer and line driver with 3-state outputs, manufactured by Nexperia. Designed as an 8-bit non-inverting buffer, the device can be configured as either two independent 4-bit buffers or a single 8-bit buffer, each with its own active-low output enable (OE) control. When the output enable is HIGH, the outputs enter a high-impedance OFF-state, making the device ideal for driving bus lines, memory address drivers, and other bus-oriented applications. Operating from a wide supply voltage range of 2.0V to 6.0V, the 74HC244D is pin-compatible with standard LSTTL devices while offering the low power consumption characteristic of CMOS logic. Packaged in an SO20 (SOIC-20) surface-mount package, this device is specified over the extended temperature range of -40°C to +125°C and provides ESD protection exceeding 2000V HBM.

Key Specifications

Parameter Value
Logic Family 74HC (High-Speed CMOS)
Function Octal Buffer / Line Driver, Non-Inverting
Number of Channels 8 (two 4-bit sections)
Output Type 3-State (Non-Inverting)
Supply Voltage Range (VCC) 2.0 V to 6.0 V
Input Logic Levels CMOS (74HC244)
Output Drive Current ±7.8 mA (max at 4.5V VCC)
Maximum Clock Frequency 36 MHz (typ)
Propagation Delay (tpd) 10 ns (typ) @ VCC=4.5V
Quiescent Supply Current (ICC) 4.0 µA (max) @ 25°C
Number of Output Enable Pins 2 (1OE, 2OE, active LOW)
ESD Protection (HBM) >2000 V (JESD22-A114F Class 2)
ESD Protection (CDM) >1000 V (JS-002 Class C3)
Latch-Up Performance >100 mA per JESD 78 Class II Level B
Operating Temperature Range -40°C to +125°C
Package SO20 / SOIC-20 (SOT163-1)
Compliance JEDEC JESD8C, JESD7A; RoHS compliant

Features

  • Wide supply voltage range: 2.0V to 6.0V for flexibility across system designs
  • Non-inverting 3-state outputs with two independent output enables
  • CMOS low power dissipation with high noise immunity
  • High-speed operation: 10ns typical propagation delay, 36MHz typical fmax
  • Balanced propagation delays (tPLH ≈ tPHL) for symmetrical signal timing
  • Input clamp diodes allow interfacing with signals above VCC via current-limiting resistors
  • High-current outputs capable of driving up to 15 LSTTL loads
  • Industry-standard pinout, drop-in compatible with 74HCT244 and LSTTL equivalents
  • ESD protection exceeds 2000V HBM and 1000V CDM for robust handling
  • Latch-up performance exceeds 100mA per JESD 78 Class II Level B
  • Available in multiple package options: SO20, TSSOP20, DHVQFN20, DIP20
  • Specified from -40°C to +125°C for extended industrial applications

Applications

  • Memory address drivers and bus interface circuits
  • Bus-oriented receivers and transmitters
  • Clock and signal buffering in digital systems
  • Microprocessor and microcontroller I/O expansion
  • Data acquisition and control systems
  • Industrial automation and process control
  • Level shifting between different voltage domains
  • Consumer electronics and communication equipment
Product Introduction: 74HC244D Product Introduction

The 74HC244D is an octal buffer and line driver from Nexperia’s 74HC high-speed CMOS logic family, featuring non-inverting 3-state outputs designed specifically for improving performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The device is organized as two 4-bit buffers with separate active-low output enable (1OE and 2OE) inputs, each controlling four outputs independently. When OE is LOW, the device passes data from the A inputs to the Y outputs in a non-inverting manner. When OE is HIGH, the outputs enter a high-impedance OFF-state, effectively disconnecting them from the bus. Operating from a 2.0V to 6.0V supply range, the 74HC244D offers CMOS-level inputs and achieves typical propagation delays of 10ns at 4.5V supply, with maximum output drive current of ±7.8mA. The device features input clamp diodes that enable the use of current-limiting resistors to interface signals with voltages exceeding VCC, providing design flexibility for level-shifting applications. Latch-up performance exceeds 100mA per JESD 78 Class II Level B, ensuring robustness against transient conditions. ESD protection exceeds 2000V HBM and 1000V CDM, supporting reliable handling during assembly. The SO20 package (SOT163-1) is a standard small-outline surface-mount package with 20 leads and 1.27mm pitch, measuring 12.8mm × 7.5mm body size. The device is specified over the extended industrial temperature range of -40°C to +125°C and complies with JEDEC standards JESD8C and JESD7A. The 74HC244D is a versatile logic device used across a wide range of applications including memory address decoding, bus interfacing, signal buffering, clock distribution, and general-purpose digital logic systems.

Working Principle: 74HC244D Working Principle

The 74HC244D is a CMOS-based octal buffer that functions as a non-inverting line driver with 3-state output capability. Each of the eight buffer channels consists of a non-inverting CMOS amplifier stage that drives an output stage with high-impedance (3-state) capability. When the corresponding output enable (OE) pin is LOW, the output is active and follows the input logic level – a HIGH input produces a HIGH output and a LOW input produces a LOW output (non-inverting). When OE is HIGH, the output stage is disabled and enters a high-impedance state where the output pin is effectively disconnected from the internal circuitry, allowing multiple devices to share a common bus line without contention. The device is divided into two 4-bit sections, each controlled by its own OE pin (1OE for channels 1-4, 2OE for channels 5-8), providing independent bus isolation control for each half. The CMOS input structure draws virtually no DC current (leakage only in the microamp range), enabling high fan-out from previous logic stages. The output stage uses complementary MOS transistors (PMOS pull-up and NMOS pull-down) to provide symmetric sourcing and sinking capability. The 3-state function is implemented by adding additional control transistors that can disable both the pull-up and pull-down output transistors simultaneously, creating the high-impedance state. Internal propagation delay is minimized through careful circuit design and silicon gate CMOS technology, achieving typical delays of approximately 10ns at 4.5V supply. The input protection diodes (connected to VCC and GND) provide ESD protection and allow input voltages slightly beyond the supply rails when limited by external series resistors.

Pin Description: 74HC244D Pin Definition and Functions
Pin No. Name Description
1 1OE Output Enable for channels 1-4 (active LOW); when HIGH, outputs 1Y1-1Y4 are high-impedance
2 1A1 Data input for buffer 1 (channel 1)
3 2A4 Data input for buffer 8 (channel 8)
4 1A2 Data input for buffer 2 (channel 2)
5 2A3 Data input for buffer 7 (channel 7)
6 1A3 Data input for buffer 3 (channel 3)
7 2A2 Data input for buffer 6 (channel 6)
8 1A4 Data input for buffer 4 (channel 4)
9 2A1 Data input for buffer 5 (channel 5)
10 GND Ground (0V supply)
11 2Y1 3-state output for buffer 5 (channel 5)
12 1Y4 3-state output for buffer 4 (channel 4)
13 2Y2 3-state output for buffer 6 (channel 6)
14 1Y3 3-state output for buffer 3 (channel 3)
15 2Y3 3-state output for buffer 7 (channel 7)
16 1Y2 3-state output for buffer 2 (channel 2)
17 2Y4 3-state output for buffer 8 (channel 8)
18 1Y1 3-state output for buffer 1 (channel 1)
19 2OE Output Enable for channels 5-8 (active LOW); when HIGH, outputs 2Y1-2Y4 are high-impedance
20 VCC Positive supply voltage, 2.0V to 6.0V
Application Scenarios: In which products and applications is 74HC244D used
  • Memory address drivers and data bus buffer interfaces
  • Clock distribution and signal buffering in microprocessor systems
  • Bus-oriented receivers and transmitters in digital systems
  • Microcontroller and FPGA I/O expansion and level shifting
  • Data acquisition systems and industrial control modules
  • Communication equipment and network interface circuits
  • Consumer electronics including TVs, set-top boxes, and audio equipment
  • General-purpose digital logic and signal routing applications
Alternative Models: What chips are recommended as replacements for 74HC244D
Model Manufacturer Key Difference
74HCT244D Nexperia Same function, TTL-level inputs, 4.5-5.5V supply range
74HC244PW Nexperia Same function, TSSOP-20 package, smaller footprint
74HC240D Nexperia Inverting version of 74HC244, same package and specs
SN74HC244 Texas Instruments Equivalent octal buffer, 74HC family, TI manufacturer
74HC541D Nexperia Octal buffer with single OE, flow-through pinout for PCB layout

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1