Opens in a new tab

Home » Integrated Circuits ICs » 74HC594D118

74HC594D118

8-bit shift register with output latch, HC, SOIC-16

7695

Effective Inventory

Image for reference only

Manufacturer Part:

74HC594D118

Package:

16-Pin SOIC (9.9 x 3.9 x 1.5 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 74HC594D118 is an Nexperia 8-bit shift register with output register and separate clock lines, 2V-6V supply, 65MHz shift frequency, tri-state outputs, and serial-in/parallel-out architecture. Packaged in SOIC-16, -40C to +125C.

Key Specifications

Bits 8-bit shift + 8-bit output register
Supply 2 V to 6 V
Shift Frequency 65 MHz (typ at 4.5V)
Output Type Tri-state
Propagation Delay 13 ns typ at 4.5V
Package SOIC-16

Features

  • 8-bit shift register with output latch
  • Separate shift and storage clock lines
  • Tri-state outputs for bus-oriented applications
  • Direct clear (SRCLR) for shift register
  • Output enable (OE) pin
  • Serial cascade output (Q7S) for daisy-chaining
  • Wide 2V-6V supply range

Applications

  • LED display driving and multiplexing
  • GPIO expansion via SPI-like interface
  • Serial-to-parallel data conversion
  • Cascaded control systems
Product Introduction: 74HC594D118 Product Introduction

The 74HC594D118 is a Nexperia 8-bit shift register with output register in a 16-pin SOIC package. The device consists of an 8-bit shift register and an 8-bit D-type storage register with separate clock and control inputs, allowing data to be shifted in serially and then transferred to the output register simultaneously. This two-stage architecture prevents output glitches during serial data loading, as the outputs only change when the storage register is updated. The shift register has a direct overriding clear (SCLR) and serial input (SER), and the storage register has a direct overriding clear (RCLR) and output enable (OE). The cascading output (Q7S) enables daisy-chaining multiple devices for longer shift registers. The device operates from 2.0V to 6.0V with typical propagation delay of 13ns at VCC=5V, supporting shift rates up to 76 MHz. The -118 suffix indicates tape and reel packaging.

Working Principle: 74HC594D118 Working Principle

The 74HC594D118 operates as a two-stage serial-to-parallel converter. Data is shifted into the 8-bit shift register on the rising edge of the shift register clock (SCLK). The serial data enters through the SER pin and propagates through D1-D8 with each clock pulse. The Q7S output provides the overflow bit for cascading additional shift registers. Once all 8 bits are loaded, the data is transferred from the shift register to the 8-bit storage register on the rising edge of the register clock (RCLK). The storage register outputs (Q0-Q7) reflect the latched data only when the output enable (OE) is low; when OE is high, the outputs are in a high-impedance state. The SCLR (active low) clears the shift register independently of the storage register, and the RCLR (active low) clears the storage register independently of the shift register. This separation allows simultaneous data shifting and output holding.

Pin Description: 74HC594D118 Pin Definition and Functions
Pin Mnemonic Description
1 OE Output enable (active low)
2 SCLR Shift register clear (active low)
3 SCLK Shift register clock input
4 RCLK Storage register clock input
5 SER Serial data input
6 Q7S Cascading serial output
7 RCLR Storage register clear (active low)
8 GND Ground
9 Q0 Parallel output 0
10-16 Q1-Q7 Parallel outputs 1-7
Application Scenarios: In which products and applications is 74HC594D118 used
  • LED matrix column/row driver with two-stage latch preventing display glitches during serial data load
  • GPIO expander for MCU via SPI with daisy-chain Q7S output for 16+ bits of I/O
  • Relay board control with OE enabling/disabling all outputs simultaneously for safe power-up
  • Seven-segment display multiplexer with independent shift and storage clock for flicker-free update
Alternative Models: What chips are recommended as replacements for 74HC594D118
Model Manufacturer Key Difference
74HC595D118 Nexperia 8-bit shift register, no separate clear
74HCT594D118 Nexperia TTL input levels, same function
SN74HC594DR TI Same function, TI brand
74HC595PW118 Nexperia 595 variant, TSSOP-16

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1