Opens in a new tab

74LVC245APW

Octal bus transceiver, 1.2-3.6V, 5V tolerant, 24mA, 3-state, TSSOP-20

9791

Effective Inventory

Image for reference only

Manufacturer Part:

74LVC245APW

Package:

TSSOP-20 SOT360-1 (6.5 x 4.4 x 1.1mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The 74LVC245APW is an octal bus transceiver from Nexperia with 3-state outputs, 5V tolerant I/O, direction control, and 24mA drive in a TSSOP-20 package.

Key Specifications

Number of Bits 8
Supply Voltage (VCC) 1.2V to 3.6V
Input Voltage Tolerance Up to 5.5V (overvoltage tolerant)
Output Drive ±24mA
Propagation Delay 17ns max (at 3.3V)
Max Frequency 175MHz
Output Type 3-state (high-impedance when disabled)
Direction Control DIR pin (A→B or B→A)
Output Enable OE pin (active low)
Ioff Support Yes (partial power-down safe)
Schmitt Trigger Yes (on all inputs)
Operating Temperature -40°C to +125°C
Package TSSOP-20 (6.5 x 4.4mm)

Features

  • 8-bit bidirectional bus transceiver with 3-state outputs
  • 5V tolerant inputs/outputs for mixed 3.3V/5V designs
  • Wide supply voltage: 1.2V to 3.6V
  • ±24mA balanced output drive
  • DIR pin controls data direction (A→B or B→A)
  • OE pin disables both buses (high-impedance)
  • Schmitt-trigger inputs tolerate slow edge rates
  • Ioff circuitry prevents backflow during power-down
  • Direct interface with TTL and CMOS logic levels

Applications

  • Mixed 3.3V/5V voltage level translation
  • Bus buffering and isolation
  • Microprocessor I/O port expansion
  • Memory bus interface
  • Backplane driving
Product Introduction: 74LVC245APW Product Introduction

The 74LVC245APW from Nexperia is an 8-bit bidirectional bus transceiver with 3-state outputs designed for asynchronous communication between data buses. The DIR (direction) pin selects whether data flows from the A bus to the B bus or vice versa. The OE (output enable) pin, when high, places both buses in high-impedance state for bus isolation. The 5V tolerant inputs and outputs enable direct interfacing between 3.3V and 5V logic systems without external level shifters. Schmitt-trigger inputs on all pins tolerate slow input edge rates, making the device suitable for接收 signals from RC-filtered or open-drain sources. The Ioff circuitry ensures that when VCC is 0V, the I/O pins present high impedance, preventing damaging backflow current in partial power-down scenarios. The ±24mA output drive capability can directly drive heavy capacitive loads or backplane traces. The APW suffix denotes the TSSOP-20 package.

Working Principle: 74LVC245APW Working Principle

The 74LVC245APW contains eight identical bidirectional transceiver cells, each connecting one A-bus pin to one B-bus pin through a pair of tristate buffers. When DIR is high, the A-to-B buffers are enabled and the B-to-A buffers are disabled, allowing data to flow from A to B. When DIR is low, the B-to-A buffers are enabled and data flows from B to A. The OE pin controls the overall enable: when OE is low, the selected direction is active; when OE is high, all buffers are disabled and both A and B buses are in high-impedance state. The 5V tolerance works because the input protection diodes clamp to VCC only when the input voltage exceeds VCC, but the Ioff circuitry disconnects these diodes when VCC is 0V, allowing the pin to float without drawing current. When the device is powered (VCC = 3.3V), the 5V-tolerant inputs can accept voltages up to 5.5V without forward-biasing the input diodes, because the protection structure is designed to tolerate this overvoltage. The Schmitt-trigger input stage provides hysteresis (typically 200mV at 3.3V), converting slowly rising or falling input signals into clean logic transitions.

Pin Description: 74LVC245APW Pin Definition and Functions
Pin Name Type Description
1 DIR Input Direction control (high=A→B, low=B→A)
2 A1 I/O A-bus data pin 1
3 A2 I/O A-bus data pin 2
4 A3 I/O A-bus data pin 3
5 A4 I/O A-bus data pin 4
6 A5 I/O A-bus data pin 5
7 A6 I/O A-bus data pin 6
8 A7 I/O A-bus data pin 7
9 A8 I/O A-bus data pin 8
10 GND Power Ground
11 B8 I/O B-bus data pin 8
12 B7 I/O B-bus data pin 7
13 B6 I/O B-bus data pin 6
14 B5 I/O B-bus data pin 5
15 B4 I/O B-bus data pin 4
16 B3 I/O B-bus data pin 3
17 B2 I/O B-bus data pin 2
18 B1 I/O B-bus data pin 1
19 OE Input Output enable (active low)
20 VCC Power Supply (1.2V to 3.6V)
Application Scenarios: In which products and applications is 74LVC245APW used
  • Level Translation: 5V tolerant I/O translates between 3.3V MCU and 5V peripheral buses without external level shifters
  • Bus Isolation: OE pin disconnects two buses during hot-plug or debug, preventing contention between drivers
  • Buffering: ±24mA drive boosts 3.3V MCU output current for long PCB traces or backplane loads
  • Memory Interface: DIR and OE provide read/write direction control for shared memory bus between CPU and DMA
  • Power-Down Safe: Ioff prevents backflow when one side of the bus is powered while the other is off (hot-swap)
Alternative Models: What chips are recommended as replacements for 74LVC245APW
Model Manufacturer Key Difference Package Supply
74LS245N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-20 5V TTL
74LS245D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-20 5V TTL
74HC245D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-20 2-6V CMOS
74HC245N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-20 2-6V CMOS
74HCT245D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-20 4.5-5.5V TTL-in
74HCT245N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-20 4.5-5.5V TTL-in
74LVC245D TI/Nexperia Low-voltage CMOS for 1.65-3.6V modern logic with 24mA output drive and bus-hold inputs SOIC-20 1.65-3.6V CMOS
74LVC245N TI/Nexperia Through-hole DIP version of LVC family for prototyping and repair DIP-20 1.65-3.6V CMOS
74AUP245D TI/Nexperia Ultra-low power CMOS with 0.8-3.6V supply for battery-powered and mobile applications SOIC-20 0.8-3.6V CMOS
74AUP245N TI/Nexperia Through-hole DIP version of AUP family for prototyping and repair DIP-20 0.8-3.6V CMOS

The 74245 is a Octal Bus Transceiver with 3-State Output. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1