Opens in a new tab

IS42S16400J-7TLI-TR

64Mbit SDR SDRAM, 4Mx16, 143MHz, 3.3V, LVTTL, 54-TSOP-II, Industrial, TR, Obsolete

3948

Effective Inventory

Image for reference only

Manufacturer Part:

IS42S16400J-7TLI-TR

Package:

54-TSOP-II (22.22 x 10.16 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IS42S16400J-7TLI-TR is a ISSI product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications.

Key Specifications

Memory Type SDR SDRAM
Density 64Mbit (8MB)
Organization 4M x 16
Internal Banks 4
Interface LVTTL (Parallel)
Max Clock Frequency 143 MHz
Access Time 5.4 ns
Supply Voltage 3.0V to 3.6V (3.3V Typ)
Operating Current 90 mA (Max)
Programmable CAS Latency 2, 3 clocks
Programmable Burst Length 1, 2, 4, 8, Full Page
Burst Sequence Sequential / Interleave
Refresh 8K cycles / 64ms (Com/Ind/A1), 8K/32ms (A2)
Auto Refresh / Self Refresh Yes / Yes
Operating Temperature -40 C to +85 C (Industrial)
Package 54-TSOP-II (10.16mm width)
Process Technology 72nm
Part Status Obsolete

Features

64Mbit SDR SDRAM organized as 4M x 16; 143MHz maximum clock frequency; 4 internal banks for concurrent operation; Single 3.3V power supply; LVTTL-compatible inputs and outputs; Programmable CAS latency (2, 3 clocks); Programmable burst length (1, 2, 4, 8, full page); Programmable burst sequence (sequential/interleave); Auto precharge; Auto refresh (CBR); Self refresh mode; All signals referenced to positive clock edge; Tape and reel packaging

Applications

Embedded systems main memory; Industrial control and automation; Networking equipment buffer memory; Consumer electronics; Set-top boxes; Automotive infotainment (legacy designs); Data buffering and FIFO applications; Legacy system maintenance and replacement

Product Introduction: IS42S16400J-7TLI-TR Product Introduction

The IS42S16400J-7TLI-TR from ISSI (Integrated Silicon Solution, Inc.) is a 64Mbit SDR SDRAM organized as 4M x 16 bits, fabricated on 72nm process technology. Operating at a maximum clock frequency of 143MHz with 5.4ns access time, this device provides reliable synchronous DRAM performance for embedded and industrial applications. The quad-bank architecture enables concurrent bank operation, hiding row access and precharge times for seamless high-speed random access. The device supports programmable CAS latency of 2 or 3 clocks and programmable burst lengths of 1, 2, 4, 8, or full page, providing flexibility for various memory controller designs. Auto precharge and auto refresh (CBR) modes simplify memory controller design, while self refresh mode maintains data integrity during low-power standby. The -7TLI-TR designation indicates 143MHz speed grade (7ns tCK), industrial temperature range (-40C to +85C), TSOP-II package, and tape and reel packaging. Note: This device is classified as Obsolete; new designs should consider the IS42S16400N replacement or alternative SDRAM devices from ISSI.

Working Principle: IS42S16400J-7TLI-TR Working Principle

The IS42S16400J-7TLI-TR operates as a synchronous dynamic random-access memory where all signals are registered on the positive edge of the system clock (CLK). The memory array is organized as four independent banks, each containing 1M words of 16 bits, allowing one bank to be accessed while another is being precharged. Memory access begins with an ACTIVE command that latches the bank address (BA0-BA1) and row address (A0-A11) to open a specific row in the selected bank. A subsequent READ or WRITE command latches the column address (A0-A9 with A10 for auto precharge) to access the target data within the active row. Data is transferred in burst mode starting at the selected column and continuing for the programmed burst length. The SDRAM requires periodic refresh to maintain data integrity, with 8192 refresh cycles every 64ms for commercial and industrial temperature grades. Auto refresh (CBR) performs this automatically, while self refresh mode allows the device to generate its own internal refresh cycles without external clock, enabling very low standby power consumption. The programmable mode register sets CAS latency, burst type, and burst length at initialization.

Pin Description: IS42S16400J-7TLI-TR Pin Definition and Functions
Pin Name Type Function
A0-A11 Address Inputs Input Multiplexed row/column address; row during ACTIVE, column during READ/WRITE
BA0, BA1 Bank Select Input Selects one of 4 internal banks for ACTIVE, READ, WRITE, or PRECHARGE
DQ0-DQ15 Data I/O I/O 16-bit bidirectional data bus
CLK System Clock Input Master clock; all inputs sampled on rising edge
CKE Clock Enable Input Enables/disables CLK; controls power-down and self refresh entry
CS Chip Select Input Active-low chip select; enables command decoding
RAS Row Address Strobe Input Command input (with CAS, WE, CS)
CAS Column Address Strobe Input Command input (with RAS, WE, CS)
WE Write Enable Input Command input (with RAS, CAS, CS)
DQML, DQMH Data Mask Input Lower/Upper byte data mask; masks input data during writes, enables/disables outputs during reads
Application Scenarios: In which products and applications is IS42S16400J-7TLI-TR used
  • Embedded System Main Memory: Provides 8MB of SDR SDRAM for microcontroller and FPGA-based embedded systems requiring moderate memory bandwidth at 143MHz.
  • Industrial Control: Serves as buffer and working memory in PLCs and industrial controllers with industrial temperature grade (-40C to +85C).
  • Legacy System Maintenance: Drop-in replacement for obsolete SDRAM in existing designs requiring 64Mbit 4Mx16 SDR devices.
  • Networking Buffer: Packet buffering in network equipment with burst-oriented access patterns and quad-bank interleaving.
Alternative Models: What chips are recommended as replacements for IS42S16400J-7TLI-TR
Manufacturer Part Number Package Density Notes
ISSI IS42S16400N-7TLI 54-TSOP-II 64Mbit Recommended replacement, newer generation
Alliance Memory AS4C4M16SA-5TCN 54-TSOP-II 64Mbit Pin-compatible alternative
ISSI IS42S16160J-7TLI 54-TSOP-II 256Mbit Higher density, same voltage/interface
Winbond W9812G6KH-6 54-TSOP-II 128Mbit Double density, backward compatible

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1