Opens in a new tab

NCP500SN25T1G

150mA LDO, 2.5V fixed output, 190mV dropout, low noise, enable pin, TSOP-5

5128

Effective Inventory

Image for reference only

Manufacturer Part:

NCP500SN25T1G

Package:

TSOP-5 (SOT-23-5) 2.9 x 1.6 x 1.1 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi NCP500SN25T1G is a low-dropout (LDO) linear voltage regulator providing a fixed 2.5 V output at up to 150 mA. Housed in a TSOP-5 (SOT-23-5) package, it features ultra-low dropout voltage of 190 mV at 150 mA, low noise operation without requiring an external bypass capacitor, and an enable pin for power management control. The device operates from a 1.8 V to 6.0 V input supply.

Key Specifications

Output Voltage 2.5 V (Fixed)
Output Current 150 mA
Input Voltage Range 1.8 V to 6.0 V
Dropout Voltage (Typ) 190 mV @ 150 mA
Output Accuracy ±2.5%
Quiescent Current (Typ) 180 µA
PSRR 62 dB
Enable Pin Yes
Operating Temperature -40°C to +125°C
Package TSOP-5 (SOT-23-5)

Features

  • Ultra-low dropout voltage of 190 mV at full 150 mA load
  • Low noise operation without external noise bypass capacitor
  • Fast enable turn-on time of 20 µs
  • Wide input voltage range from 1.8 V to 6.0 V
  • Compatible with low-cost ceramic capacitors (1.0 µF minimum)
  • Internal current limit and thermal shutdown protection
  • Enable pin drivable by 1.0 V logic

Applications

  • Noise-sensitive circuits such as VCOs and RF stages
  • SMPS post-regulation
  • Hand-held instrumentation and portable devices
  • Camcorders and cameras
  • Battery-powered applications requiring extended battery life
Product Introduction: NCP500SN25T1G Product Introduction

The onsemi NCP500SN25T1G is a low-dropout (LDO) linear voltage regulator designed for portable battery-powered applications requiring low noise operation, fast enable response time, and low dropout. The device provides a fixed 2.5 V output at up to 150 mA from an input range of 1.8 V to 6.0 V. It achieves ultra-low noise performance without the need for an external noise bypass capacitor. The internal architecture includes a voltage reference unit, error amplifier, PMOS power transistor, output voltage setting resistors, current limit protection, and temperature limit protection circuits. The NCP500 is designed for use with low-cost ceramic capacitors and requires a minimum output capacitor of 1.0 µF.

Working Principle: NCP500SN25T1G Working Principle

The NCP500SN25T1G uses a PMOS pass transistor as the regulating element. The error amplifier compares a fraction of the output voltage (via internal resistor divider) with a precision internal voltage reference. The amplifier output drives the gate of the PMOS transistor to regulate the output. Because the PMOS device has very low on-resistance, the dropout voltage is only 190 mV at full load. The enable pin allows external logic to turn the regulator on or off with a 20 µs turn-on time. Internal protection circuits include current limiting and thermal shutdown, which safely disable the regulator under fault conditions.

Pin Description: NCP500SN25T1G Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input supply voltage (1.8 V to 6.0 V)
2 GND Power Ground reference
3 EN Input Enable input — logic high enables the regulator
4 NC/Bypass NC No connect / bypass capacitor (not required for low noise)
5 VOUT Output Regulated 2.5 V output
Application Scenarios: In which products and applications is NCP500SN25T1G used
  • RF and VCO power supply noise filtering in wireless communication modules
  • Post-regulation after switching converters in portable instruments
  • Battery-powered camcorders and digital cameras
  • Hand-held medical instrumentation requiring low noise
  • IoT sensor nodes requiring stable low-noise supply rails
Alternative Models: What chips are recommended as replacements for NCP500SN25T1G
Manufacturer Part Number Package Notes
onsemi NCP500SN30T1G TSOP-5 3.0V output variant
onsemi NCP500SN33T1G TSOP-5 3.3V output variant
Texas Instruments LP2985-2.5 SOT-23-5 Similar specs, 150mA LDO
Microchip TC1015-2.5VCT SOT-23-5 50mA, pin-compatible
onsemi NCP512SN25T1G TSOP-5 Lower Iq alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1