Opens in a new tab

ESD5Z3.3T1G

ESD protection TVS diode, 3.3V VRWM, 12.5V clamping, 200W, IEC61000-4-2 Level 4, SOD-523

7621

Effective Inventory

Image for reference only

Manufacturer Part:

ESD5Z3.3T1G

Package:

SOD-523 (SC-79) 1.2 x 0.8 x 0.7 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi ESD5Z3.3T1G is a transient voltage suppressor (TVS) diode specifically designed for ESD protection of sensitive electronic components. Housed in a compact SOD-523 package, it provides a working voltage of 3.3V with a breakdown voltage of 6.5V (typical) and clamping voltage of 12.5V at peak pulse current. The device meets IEC 61000-4-2 Level 4 ESD protection standards.

Key Specifications

Working Voltage (VRWM) 3.3 V
Breakdown Voltage (VBR) 6.5 V (Typ)
Clamping Voltage (VC) 12.5 V @ IPP = 5.8A
Reverse Leakage Current 1 µA @ 3.3V
ESD Rating (IEC 61000-4-2) ±15 kV (Air), ±8 kV (Contact)
Peak Pulse Power (PPPM) 200 W (8/20 µs)
Operating Temperature -55°C to +150°C (TJ)
Package SOD-523 (SC-79)

Features

  • IEC 61000-4-2 Level 4 ESD protection: ±15 kV air, ±8 kV contact
  • Ultra-low capacitance for high-speed signal line protection
  • Low clamping voltage of 12.5V protects 3.3V logic devices
  • Compact SOD-523 package (1.2 x 0.8 mm) for high-density boards
  • 200W peak pulse power dissipation (8/20 µs waveform)
  • Low leakage current of 1 µA at working voltage
  • Pb-Free, RoHS compliant

Applications

  • ESD protection for USB 2.0 data lines
  • 3.3V logic circuit input protection
  • HDMI and display interface protection
  • Cellular phone antenna and connector protection
  • Portable electronics I/O port protection
Product Introduction: ESD5Z3.3T1G Product Introduction

The onsemi ESD5Z3.3T1G is a transient voltage suppressor (TVS) diode specifically designed to protect sensitive electronic components from electrostatic discharge (ESD) events. Housed in an ultra-compact SOD-523 package (1.2 x 0.8 x 0.7 mm), the device provides a working voltage of 3.3V, making it ideal for protecting 3.3V logic circuits and interfaces. The TVS diode clamps transient voltages to a safe level of 12.5V at peak pulse current (5.8A), preventing damage to downstream ICs. The device meets IEC 61000-4-2 Level 4 standards, withstanding ±15 kV air discharge and ±8 kV contact discharge. With 200W peak pulse power dissipation and low leakage current of 1 µA, the ESD5Z3.3T1G provides robust protection with minimal impact on system performance.

Working Principle: ESD5Z3.3T1G Working Principle

The ESD5Z3.3T1G operates as a bidirectional TVS diode. Under normal operating conditions (voltage below VRWM = 3.3V), the diode is in its off state, presenting high impedance with only 1 µA leakage current. When an ESD event or voltage transient occurs and the voltage exceeds the breakdown voltage (VBR = 6.5V typical), the diode enters avalanche breakdown, conducting the transient current away from the protected circuit. The voltage is clamped at VC = 12.5V at the peak pulse current of 5.8A (8/20 µs waveform). The device responds in nanoseconds, faster than the rise time of most ESD events, ensuring the protected IC never sees the full transient voltage. After the transient subsides, the diode returns to its high-impedance off state. The 200W peak pulse power rating indicates the maximum energy the device can safely absorb during a single transient event.

Pin Description: ESD5Z3.3T1G Pin Definition and Functions
Pin Name Type Function
1 Cathode Terminal Marked by band — connect to protected signal line
2 Anode Terminal Connect to ground reference
Application Scenarios: In which products and applications is ESD5Z3.3T1G used
  • USB 2.0 D+/D- data line ESD protection in portable devices
  • 3.3V microcontroller GPIO pin protection against ESD events
  • HDMI interface protection in consumer display devices
  • Cellular phone connector and antenna input protection
  • Portable medical device I/O port transient protection
Alternative Models: What chips are recommended as replacements for ESD5Z3.3T1G
Manufacturer Part Number Package Notes
onsemi ESD5Z5.0T1G SOD-523 5.0V working voltage variant
onsemi ESD9B3.3T5G SOD-923 Smaller package alternative
Vishay VSU3V3B3 SOD-523 Equivalent 3.3V TVS
Nexperia PESD3V3L5UY SOD-523 Similar ESD protection diode
onsemi ESD5Z3.3T5G SOD-523 8000-piece reel alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1