Opens in a new tab

Home » Integrated Circuits ICs, Sensors » SHT31-DIS-B2.5KS

SHT31-DIS-B2.5KS

Digital humidity & temperature sensor, ±2% RH, ±0.2°C, I2C, 2.5×2.5mm DFN

8743

Effective Inventory

Image for reference only

Manufacturer Part:

SHT31-DIS-B2.5KS

Package:

8-DFN (2.5 x 2.5 x 0.9 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SHT31-DIS-B2.5KS from Sensirion is a digital humidity and temperature sensor in the SHT3x-DIS series, packaged in an 8-DFN (2.5 x 2.5 x 0.9 mm) surface-mount package. It offers ±2% RH humidity accuracy and ±0.2°C temperature accuracy with an I2C interface, operating from 2.15V to 5.5V. The sensor is factory-calibrated and supports a wide operating temperature range of -40°C to 125°C.

Key Specifications

Humidity Accuracy ±2% RH
Temperature Accuracy ±0.2°C
Humidity Range 0–100% RH
Temperature Range -40°C to 125°C
Supply Voltage 2.15V to 5.5V
Average Supply Current 1.7 µA
Interface I2C (up to 1 MHz)
Response Time (τ63%) 8 s (humidity), >2 s (temperature)
Package 8-DFN, 2.5 x 2.5 x 0.9 mm
Output Resolution 16-bit

Features

  • Factory-calibrated digital humidity and temperature sensor
  • Two I2C addresses selectable (0x44 / 0x45)
  • Programmable humidity and temperature alert modes
  • Integrated heater for condensation removal
  • CRC-8 checksum for data integrity
  • Ultra-low power consumption suitable for battery-operated devices
  • Available in tape & reel packaging (2500/10000 pcs)

Applications

  • HVAC and building automation
  • Industrial process control
  • Consumer electronics and smart home devices
  • Weather stations and environmental monitoring
  • Medical and respiratory equipment
  • IoT sensor nodes
Product Introduction: SHT31-DIS-B2.5KS Product Introduction

The SHT31-DIS-B2.5KS is part of Sensirion’s SHT3x-DIS humidity sensor series, the successor to the widely adopted SHT2x series. It sets the industry standard in humidity sensing by combining multiple functions and various interfaces (I2C, analog voltage output) with a wide operating voltage range of 2.15 to 5.5V. The SHT3x series consists of the SHT30 (low-cost), SHT31 (standard), and SHT35 (high-end) variants. The SHT31-DIS-B2.5KS is the standard version with ±2% RH accuracy. Built on Sensirion’s CMOSens technology, the sensor integrates a capacitive humidity sensor, a bandgap temperature sensor, signal processing, and calibration data on a single chip. The DFN package measures just 2.5 x 2.5 x 0.9 mm, making it ideal for space-constrained applications.

Working Principle: SHT31-DIS-B2.5KS Working Principle

The SHT31-DIS-B2.5KS operates through three key subsystems:

1. Sensing Elements: A capacitive humidity sensor and a bandgap temperature sensor are co-located on the CMOSens chip. The humidity sensor uses a polymer dielectric whose capacitance changes with moisture absorption. The temperature sensor utilizes a bandgap reference circuit for precise temperature measurement.

2. Signal Processing: An integrated ADC converts the analog signals from both sensing elements into 16-bit digital values. The sensor applies linearization and compensation for temperature and supply voltage effects internally, outputting fully calibrated data.

3. I2C Communication: The sensor communicates via a standard I2C interface at clock frequencies up to 1 MHz. Two I2C addresses (0x44 and 0x45) are selectable via the ADDR pin. Each measurement transaction includes an 8-bit CRC checksum (polynomial 0x31) for data integrity. The sensor supports single-shot and periodic measurement modes with configurable repeatability (low, medium, high).

Pin Description: SHT31-DIS-B2.5KS Pin Definition and Functions
Pin Name Type Function
1 SCL Input I2C serial clock
2 VSS Power Ground
3 SDA I/O I2C serial data
4 ADDR Input I2C address selection (tie to VSS or VDD)
5 VDD Power Supply voltage (2.15–5.5V)
6 nALERT Output Alert / status output (open-drain)
7 RESET Input Active-low reset (or leave floating)
8 R – Reserved / no connect (pad on bottom)
Application Scenarios: In which products and applications is SHT31-DIS-B2.5KS used
  • HVAC systems: Real-time humidity and temperature monitoring for building climate control with ±2% RH accuracy
  • Smart home devices: Integration into thermostats, humidifiers, and air quality monitors via I2C interface
  • Industrial automation: Process control in food production, pharmaceuticals, and textile manufacturing requiring precise environmental monitoring
  • Weather stations: Compact environmental sensor nodes with low power consumption (1.7 µA average) for remote monitoring
  • Medical equipment: Respiratory therapy devices and incubators requiring accurate humidity measurement
Alternative Models: What chips are recommended as replacements for SHT31-DIS-B2.5KS
Manufacturer Part Number Package Notes
Sensirion SHT30-DIS-B2.5KS 8-DFN (2.5×2.5) Lower cost, ±3% RH accuracy
Sensirion SHT35-DIS-B2.5KS 8-DFN (2.5×2.5) High-end, ±1.5% RH accuracy
Sensirion SHT31-DIS-P2.5KS 8-DFN (2.5×2.5) With protective cover (PTFE membrane)
TE Connectivity HTU31D 8-DFN (2.5×2.5) ±2% RH, I2C, pin-compatible alternative
Aosong AHT20 4-SMD Lower cost, ±3% RH, I2C
Amphenol CHIPCAP 2 6-SMD ±2% RH, wider voltage range

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1