Opens in a new tab

LPS25HBTR

Piezoresistive pressure sensor, 260-1260 hPa, 4µA, I2C/SPI, HLGA-10L 2.5×2.5×0.76mm

6521

Effective Inventory

Image for reference only

Manufacturer Part:

LPS25HBTR

Package:

HLGA-10L (2.5 x 2.5 x 0.76 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LPS25HBTR from STMicroelectronics is a piezoresistive absolute pressure sensor functioning as a digital output barometer. It measures pressure from 260 to 1260 hPa with ultra-low current consumption of 4 µA. The device is housed in an HLGA-10L package measuring 2.5 x 2.5 x 0.76 mm and communicates via I2C or SPI interfaces.

Key Specifications

Pressure Range 260–1260 hPa
Supply Voltage 1.7V to 3.6V
Current Consumption 4 µA (typical)
Output Type Digital (I2C / SPI)
ODR Range 1 Hz to 25 Hz
Operating Temperature -30°C to +105°C
Package HLGA-10L, 2.5 x 2.5 x 0.76 mm
Embedded FIFO Yes
Packing Tape & Reel

Features

  • Ultra-thin package: only 0.76 mm height
  • Embedded FIFO for data batching and reduced host MCU load
  • Programmable ODR from 1 Hz to 25 Hz
  • Interrupt generation on threshold crossing or data-ready
  • Full-mold holed LGA package for moisture resistance
  • High design flexibility for wearable and IoT applications

Applications

  • Weather forecasting and barometric monitoring
  • Altitude and vertical speed measurement
  • Indoor navigation and floor detection
  • Enhanced GPS navigation
  • Smartphones, tablets, and wearables
  • IoT environmental sensor nodes
Product Introduction: LPS25HBTR Product Introduction

The LPS25HBTR is an ultra-thin piezoresistive absolute pressure sensor from STMicroelectronics, designed as a digital output barometer. The device integrates a monolithic sensing element with a mixed-signal ASIC in a full-mold holed LGA (HLGA) package. At only 0.76 mm thick, it offers high design flexibility for multifunctional applications including smartphones, tablets, wearables, and IoT devices. The LPS25HB improves upon previous generations with enhanced robustness, reliability, and moisture resistance while reducing package thickness. It operates from 1.7V to 3.6V with ultra-low 4 µA current consumption, making it suitable for battery-powered devices.

Working Principle: LPS25HBTR Working Principle

The LPS25HB operates through three main subsystems:

1. Sensing Element: A suspended membrane manufactured using ST’s dedicated MEMS process detects absolute pressure through piezoresistive principles. The membrane deflects under pressure changes, and integrated piezoresistors convert the mechanical deformation into electrical signals.

2. Signal Processing ASIC: A mixed-signal ASIC conditions the signal from the sensing element, performing amplification, ADC conversion, and digital compensation. Temperature compensation is applied to ensure accuracy across the operating range. The processed data is available as digital pressure values in hPa.

3. Digital Interface: The sensor communicates via I2C or SPI with an embedded 32-level FIFO that stores pressure data, reducing host MCU polling overhead. Programmable ODR (1–25 Hz) and interrupt generation on threshold crossing or data-ready events enable autonomous operation.

Pin Description: LPS25HBTR Pin Definition and Functions
Pin Name Type Function
1 VDD_IO Power Power supply for I/O pins (1.7–3.6V)
2 CS Input SPI chip select / I2C address selection
3 INT1 Output Programmable interrupt
4 GND Power Ground
5 GND Power Ground
6 VDD Power Power supply (1.7–3.6V)
7 SPC I/O SPI clock / I2C SCL
8 SDI I/O SPI data in / I2C SDA
9 SDO Output SPI data out / I2C addr LSB
10 INT2 Output Programmable interrupt (FIFO)
Application Scenarios: In which products and applications is LPS25HBTR used
  • Weather stations: Atmospheric pressure measurement for local weather prediction with 260–1260 hPa range
  • Wearable devices: Altimeter and vertical speed indication in smartwatches and fitness bands with 0.76mm thin package
  • Indoor navigation: Floor-level detection in malls and multi-story buildings using pressure differentials
  • Smartphones: Enhanced GPS navigation with barometric altitude compensation
  • IoT sensor nodes: Environmental monitoring with 4 µA ultra-low current and FIFO-based data batching
Alternative Models: What chips are recommended as replacements for LPS25HBTR
Manufacturer Part Number Package Notes
STMicroelectronics LPS22HBTR HLGA-10L (2.0×2.0) Smaller package, 10 µA current
STMicroelectronics LPS33HW Metal cap Water-resistant version
Bosch BMP280 LGA-8 (2.0×2.5) 300–1100 hPa, I2C/SPI
Bosch BMP388 LGA-10 (2.0×2.0) Higher resolution, lower power
TE Connectivity MS5803-02BA Stainless cap Waterproof, 10–2000 mbar

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1