Opens in a new tab

Home » Integrated Circuits ICs » TUSB1046A-DCIRNQR

TUSB1046A-DCIRNQR

TI USB Type-C 10Gbps redriver/DP1.4 crosspoint switch, WQFN-40, 3.3V, -40 to 85C

3287

Effective Inventory

Image for reference only

Manufacturer Part:

TUSB1046A-DCIRNQR

Package:

WQFN-40 (6.0 x 4.0 mm, 0.4mm pitch)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TUSB1046A-DCIRNQR is a USB Type-C alternate mode 10-Gbps linear redriver and crosspoint switch from Texas Instruments. Supporting USB 3.1 Gen 2 (10 Gbps) and DisplayPort 1.4 (8.1 Gbps) data rates, this device provides signal conditioning and channel switching for USB Type-C dock, hub, and host applications in laptops, tablets, and docking stations.

Key Specifications

Series TUSB1046A
Type USB Type-C Alternate Mode Redriver/MUX
Data Rate (USB) Up to 10 Gbps (SuperSpeed USB)
Data Rate (DisplayPort) Up to 8.1 Gbps (DP 1.4 HBR3)
Supply Voltage 3.0V to 3.6V (3.3V typical)
Equalization Up to 14 dB linear equalization
Interface I2C / GPIO
Operating Temperature -40C to +85C (I grade)
Package WQFN-40 (6 x 4 mm, 0.4mm pitch)
Supported Modes USB 3.1 SSP, DP Alt Mode C/D/E/F
Hot Plug Support Yes
Intel DCI Debug Supported

Features

  • Dual-mode operation: USB 3.1 Gen 2 and DisplayPort 1.4 alternate mode
  • Integrated crosspoint switch for Type-C cable flip and DP/USB switching
  • Linear redriver with up to 14 dB equalization for channel loss compensation
  • I2C and GPIO control interface
  • Intel DCI closed-chassis debug support
  • Hot-plug capable for Type-C connector applications
  • Supports VESA DP Alt Mode configurations C, D, E, F

Applications

  • USB Type-C docking stations
  • Laptop and tablet Type-C port expansion
  • USB Type-C hubs and adapters
  • Monitor Type-C input with DP alternate mode
  • Thunderbolt docking solutions
Product Introduction: TUSB1046A-DCIRNQR Product Introduction

The Texas Instruments TUSB1046A-DCIRNQR is a USB Type-C alternate mode linear redriver and crosspoint switch supporting USB 3.1 Gen 2 (10 Gbps) and DisplayPort 1.4 (8.1 Gbps) data rates. This device integrates a crosspoint switch for Type-C cable flip detection and DP/USB protocol switching, along with linear redriver functionality with up to 14 dB of equalization. Designed for USB Type-C docking stations, hubs, and host port applications, it compensates for channel loss on PCB traces and cables, ensuring robust signal integrity at multi-gigabit data rates.

Working Principle: TUSB1046A-DCIRNQR Working Principle

The TUSB1046A-DCIRNQR operates as a signal conditioning device in the high-speed data path between the USB/DP source and the Type-C connector. In USB mode, it receives SuperSpeed USB signals from the host controller, applies equalization to compensate for PCB trace loss, and retransmits the signal to the Type-C cable. In DisplayPort alternate mode, the crosspoint switch routes the high-speed lanes from USB to DP configuration while the redriver applies appropriate signal conditioning. The crosspoint switch also handles Type-C cable orientation (flip) by routing the correct differential pairs. I2C and GPIO interfaces allow system-level configuration and mode control.

Pin Description: TUSB1046A-DCIRNQR Pin Definition and Functions
Pin Name Type Function
1-4 TX/RX Pair A Signal High-speed USB/DP differential pair A
5-8 TX/RX Pair B Signal High-speed USB/DP differential pair B
9-12 CONN Pair A Signal Type-C connector differential pair A
13-16 CONN Pair B Signal Type-C connector differential pair B
17 SCL Input I2C clock
18 SDA I/O I2C data
19 VDD Power 3.3V supply
20 GND Ground Ground reference
Application Scenarios: In which products and applications is TUSB1046A-DCIRNQR used
  • USB Type-C docking station with DP alternate mode output
  • Laptop Type-C port redriver for 10Gbps USB3.1 Gen2
  • Monitor Type-C input with DP 1.4 video and USB data
  • Thunderbolt dock Type-C interface
  • USB Type-C hub multi-protocol MUX and signal conditioning
Alternative Models: What chips are recommended as replacements for TUSB1046A-DCIRNQR
Manufacturer Part Number Package Notes
TI TUSB1046A-DCIRNQT WQFN-40 Different tape option
Parade Technologies PS8743 QFN-40 USB-C redriver/MUX alternative
Analogix ANX7737 QFN USB-C DP alt mode MUX
Diodes Inc PI3USB31532 QFN USB 10Gbps redriver/MUX

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1