Opens in a new tab

Home » Integrated Circuits ICs » SN74LVC1G123DCTT

SN74LVC1G123DCTT

TI retriggerable monostable multivibrator, 1.65-5.5V, SSOP-8, -40 to 125C

5843

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LVC1G123DCTT

Package:

SSOP-8 (DCT)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LVC1G123DCTT is a single retriggerable monostable multivibrator (one-shot) from Texas Instruments’ 74LVC family. Operating from 1.65V to 5.5V, this device generates precision output pulses whose width is determined by external timing components. The SSOP-8 package provides a compact solution for pulse generation, delay timing, and frequency division in mixed-voltage digital systems.

Key Specifications

Series 74LVC1G123
Type Monostable Multivibrator (Retriggerable)
Supply Voltage 1.65V to 5.5V
Output Current +/-24 mA
Propagation Delay 6.5 ns (typical at 5V)
Minimum Pulse Width 35 ns (at 5V)
Inputs A (rising edge), B (falling edge), CLR (active low)
Outputs Q, Q-bar
Package SSOP-8 (DCT)
Operating Temperature -40C to +125C

Features

  • Retriggerable monostable for flexible pulse generation
  • Direct clear input for pulse termination
  • Complementary outputs (Q and Q-bar)
  • Over-voltage tolerant inputs to 5.5V
  • Wide supply voltage range for mixed-voltage systems
  • Low power CMOS technology
  • SSOP-8 compact footprint

Applications

  • Pulse width generation and timing
  • Debounce circuits for mechanical switches
  • Delay generation for sequential logic
  • Frequency division and pulse stretching
  • Watchdog timer circuits
Product Introduction: SN74LVC1G123DCTT Product Introduction

The Texas Instruments SN74LVC1G123DCTT is a single retriggerable monostable multivibrator from the 74LVC logic family. Operating from 1.65V to 5.5V, it generates precision output pulses whose width is set by external resistor and capacitor timing components. The retriggerable architecture allows extending the output pulse by applying additional trigger edges during the active pulse. The direct clear (CLR) input enables immediate pulse termination. With complementary Q and Q-bar outputs and over-voltage tolerant inputs, this device is ideal for pulse generation, switch debounce, and timing applications in mixed-voltage digital systems.

Working Principle: SN74LVC1G123DCTT Working Principle

The SN74LVC1G123DCTT operates as a retriggerable one-shot multivibrator. A trigger event (rising edge on A input or falling edge on B input) starts the output pulse, which remains active for a duration determined by the external timing resistor (Rext) and capacitor (Cext): tw = 0.45 x Rext x Cext. During the active pulse, additional trigger events restart the timing period (retriggerable mode), effectively extending the output pulse width. The CLR input immediately terminates the active pulse when pulled low. The complementary outputs (Q and Q-bar) provide both active-high and active-low pulse signals. The device uses CMOS technology for low power consumption and wide supply voltage compatibility.

Pin Description: SN74LVC1G123DCTT Pin Definition and Functions
Pin Name Type Function
1 A Input Trigger input – rising edge triggered
2 B Input Trigger input – falling edge triggered
3 CLR Input Direct clear (active low) – terminates output pulse
4 Q-bar Output Complementary output (inverted)
5 GND Ground Ground reference
6 Q Output Normal output (active high pulse)
7 Rext/Cext Input External timing resistor/capacitor connection
8 VCC Power Positive supply voltage (1.65-5.5V)
Application Scenarios: In which products and applications is SN74LVC1G123DCTT used
  • Mechanical switch debounce circuit with adjustable timeout
  • Pulse stretcher for short-duration signal detection
  • Delay element in sequential logic control
  • Watchdog timer with retriggerable window
  • Frequency divider via pulse-width modulation
Alternative Models: What chips are recommended as replacements for SN74LVC1G123DCTT
Manufacturer Part Number Package Notes
TI SN74LVC1G123DCUR SSOP-8 Same function, different tape
TI CD74HC123EE DIP-16 Dual monostable, HC family
Nexperia 74LVC1G123GW TSSOP-8 Pin-compatible alternative
ON Semi MC74VHC1G123DTT1G SSOP-8 Comparable monostable

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1