Opens in a new tab

Home » Integrated Circuits ICs » TPD2E2U06DRLR

TPD2E2U06DRLR

TI dual ESD protection diode, +/-25kV, 1.5pF, 5.5V, 5.5A surge, SOT-5X3 (DRL)

10284

Effective Inventory

Image for reference only

Manufacturer Part:

TPD2E2U06DRLR

Package:

SOT-5X3 (DRL), 1.6 x 1.6 mm

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPD2E2U06DRLR is a dual-channel high-speed ESD protection diode from Texas Instruments. Offering +/-25 kV contact discharge and +/-30 kV air-gap ESD protection per IEC 61000-4-2, with only 1.5 pF line capacitance and 5.5A surge current rating, this device provides robust protection for USB 2.0, LVDS, and I2C interfaces in a compact SOT-5X3 (DRL) package.

Key Specifications

Series TPD2E2U06
Type Dual-Channel TVS ESD Protection Diode
Number of Channels 2
Working Voltage (VRWM) 5.5V
Breakdown Voltage (VBR min) 6.5V
Clamping Voltage 9.7V at IEC ESD
Line Capacitance 1.5 pF (typical at 1 MHz)
Leakage Current 10 nA (max at 2.5V)
Dynamic Resistance 0.5 Ohm (typical)
IEC 61000-4-2 ESD +/-25 kV contact, +/-30 kV air-gap
IEC 61000-4-5 Surge 5.5A (8/20 us)
Package SOT-5X3 (DRL), 1.6 x 1.6 mm
Operating Temperature -40C to +125C
Direction Uni-Directional

Features

  • IEC 61000-4-2 Level 4: +/-25 kV contact, +/-30 kV air-gap ESD
  • Ultra-low 1.5 pF line capacitance for high-speed interfaces
  • 5.5A IEC 61000-4-5 surge current capability
  • Low clamping voltage of 9.7V protects downstream ICs
  • Ultra-low leakage current of 10 nA max
  • Very small 1.6 x 1.6 mm DRL package
  • Supports USB 2.0, LVDS, I2C interfaces

Applications

  • USB 2.0 data line ESD protection
  • LVDS signal pair ESD clamping
  • I2C bus overvoltage protection
  • General-purpose high-speed I/O ESD protection
  • Portable device connector ESD guard
Product Introduction: TPD2E2U06DRLR Product Introduction

The Texas Instruments TPD2E2U06DRLR is a dual-channel high-speed ESD protection diode providing IEC 61000-4-2 Level 4 protection (+/-25 kV contact, +/-30 kV air-gap) with only 1.5 pF of line capacitance. The 5.5V working voltage and 5.5A surge rating make it ideal for USB 2.0, LVDS, and I2C interface protection. The ultra-low capacitance and leakage current (10 nA max) ensure minimal impact on signal integrity. The compact 1.6 x 1.6 mm SOT-5X3 (DRL) package enables placement very close to connectors for maximum ESD protection effectiveness.

Working Principle: TPD2E2U06DRLR Working Principle

The TPD2E2U06DRLR uses silicon TVS (Transient Voltage Suppressor) diode technology in a uni-directional configuration. During normal operation, with signal voltages below the working voltage (5.5V), the TVS diodes present very high impedance (leakage less than 10 nA) and negligible capacitance (1.5 pF), allowing signals to pass without degradation. When an ESD event or voltage transient exceeds the breakdown voltage (6.5V minimum), the TVS diodes avalanche rapidly, creating a low-impedance path that shunts the surge current to ground. The device clamps the voltage to 9.7V, protecting downstream ICs. After the transient subsides, the device automatically returns to its high-impedance state.

Pin Description: TPD2E2U06DRLR Pin Definition and Functions
Pin Name Type Function
1 NC — Not connected
2 NC — Not connected
3 IO1 I/O ESD protected data channel 1
4 GND Ground Ground – connect to PCB ground plane
5 IO2 I/O ESD protected data channel 2
Application Scenarios: In which products and applications is TPD2E2U06DRLR used
  • USB 2.0 D+/D- data line ESD protection at connector
  • LVDS display differential pair ESD guard
  • I2C SDA/SCL bus overvoltage clamp
  • SD card interface CMD/CLK ESD protection
  • General-purpose 2-line ESD protection for any 5V interface
Alternative Models: What chips are recommended as replacements for TPD2E2U06DRLR
Manufacturer Part Number Package Notes
TI TPD2E2U06DCKR SC70-3 3-pin variant
Nexperia PRTR5V0U2X SOT-363 Dual ESD for USB 2.0
ON Semi NUP4202MR6 SOT-363 Dual ESD protection
Littelfuse PESD2USB5.0CA SOT-23 Dual USB ESD alternative

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1