Opens in a new tab

Home » Integrated Circuits ICs » SN74CBTD3306CPWR

SN74CBTD3306CPWR

Dual 5-bit FET bus switch, 5V-to-3.3V level shift, 7Ω Ron, TSSOP-14

9356

Effective Inventory

Image for reference only

Manufacturer Part:

SN74CBTD3306CPWR

Package:

TSSOP-14 (5.0 × 4.4 × 1.0 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74CBTD3306CPWR is a 1-bit FET bus switch with level-shifting capability from Texas Instruments, packaged in a 14-pin TSSOP (PW) package. It features two independently controlled 5-bit bus switches with 5V-tolerant inputs and built-in level translation from 5V to 3.3V. The device is optimized for hot-insertion and live-insertion applications with low on-state resistance.

Key Specifications

Function Dual 5-Bit FET Bus Switch
Bus Width 5 bits × 2 buses
Supply Voltage 3.3V (VCC)
Input Voltage Tolerance Up to 5.5V
Ron (typical) 7Ω at 3.3V
Level Translation 5V to 3.3V (built-in diode)
Package 14-pin TSSOP (5.0 × 4.4 mm)
Operating Temperature -40°C to +85°C

Features

  • Dual 5-bit bus switch with independent enable control
  • Built-in level shifting from 5V to 3.3V via internal diode
  • 5V-tolerant input/output pins
  • Low on-state resistance (7Ω typical)
  • Near-zero propagation delay through the switch
  • Supports hot-insertion and live-insertion applications
  • Applications

    • PCI/PCI-X bus isolation and level translation
    • Hot-plug and live-insertion card slots
    • 5V to 3.3V bus interface bridging
    • Server and workstation backplane switching
    • Computer peripheral interface switching
    Product Introduction: SN74CBTD3306CPWR Product Introduction

    The SN74CBTD3306C is a dual 5-bit FET bus switch with integrated level-shifting capability from Texas Instruments. It contains two independently controlled 5-bit bus switches that can isolate or connect two 5-bit buses. The internal diode clamp provides automatic 5V-to-3.3V level translation, making it ideal for mixed-voltage system designs. The FET switch architecture provides near-zero propagation delay, enabling high-speed bus switching without adding latency. The device is particularly suited for hot-insertion applications where boards are inserted into live systems.

    Working Principle: SN74CBTD3306CPWR Working Principle

    The SN74CBTD3306C uses N-channel MOSFET pass transistors as analog switches. When the enable (OE) pin is low, the MOSFET gate is driven to VCC, turning on the switch and creating a low-resistance path (7Ω typical) between the A and B ports. When OE is high, the MOSFET is off, creating a high-impedance state that isolates the buses. The internal diode connected between VCC and the MOSFET gate limits the gate voltage, which in turn clamps the maximum voltage that can pass through the switch to VCC + Vdiode. This effectively provides 5V-to-3.3V level translation: a 5V signal on the A port is clamped to approximately 3.3V + 0.7V on the B port, protecting 3.3V logic from overvoltage while preserving signal integrity.

    Pin Description: SN74CBTD3306CPWR Pin Definition and Functions
    Pin Name Type Function
    1 1OE Input Switch 1 output enable — active low
    2-6 1A1-1A5 I/O Switch 1 port A — 5-bit bus
    7 GND Power Ground
    8-12 2B1-2B5 I/O Switch 2 port B — 5-bit bus
    13 2OE Input Switch 2 output enable — active low
    14 VCC Power Supply voltage (3.3V)
    Application Scenarios: In which products and applications is SN74CBTD3306CPWR used
    • PCI/PCI-X bus isolation between 5V and 3.3V subsystems
    • Hot-plug card slot bus switching in servers
    • 5V-to-3.3V bus bridging in mixed-voltage systems
    • Computer peripheral interface signal routing
    • Bus isolation for firmware upgrade paths
    Alternative Models: What chips are recommended as replacements for SN74CBTD3306CPWR
    Manufacturer Part Number Package Notes
    TI SN74CBTD3384CPWR TSSOP-24 10-bit version of same family
    TI SN74CBT3257CPWR TSSOP-16 Quad 2:1 mux bus switch
    NXP 74CBTLV3257 TSSOP-16 Low-voltage bus switch
    onsemi NB7V74M QFN-24 10-bit bus switch with level shift
    Renesas 74CBTLV3257 TSSOP-16 Quad bus switch, similar function

    Recommend Parts

    0751.0505

    Schurter fuse, 0751.0505

    Brand: schurter

    Package: See datasheet

    IN STOCK: 6768pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TL062CDR

    Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

    Brand: TI

    Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

    IN STOCK: 11576pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    P89LPC922FN

    8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

    Brand: NXP

    Package: SSOP-20 (7.2 x 5.3 mm)

    IN STOCK: 12628pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AC0603JR-070RL

    Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

    Brand: Yageo

    Package: 0603 (1608 Metric)

    IN STOCK: 100000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    LMR34206FSC5RNXRQ1

    42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

    Brand: TI

    Package: SOT-563 (1.6 x 1.2 x 0.55mm)

    IN STOCK: 6500pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AO3402

    30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

    Brand: aosmd

    Package: SOT-23 (2.9 x 1.6 x 1.25mm)

    IN STOCK: 14066pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1