Opens in a new tab

TPS562210ADDFR

2A sync buck, 4.5-17V in, D-CAP3, 600kHz, SOT-23-8, no ext comp

12050

Effective Inventory

Image for reference only

Manufacturer Part:

TPS562210ADDFR

Package:

SOT-23-8 (2.9 × 2.8 × 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS562210ADDFR is a 2A synchronous step-down converter from Texas Instruments with an input range of 4.5V to 17V. It features 600kHz switching frequency, integrated 70mΩ and 40mΩ MOSFETs, and D-CAP3 control mode for fast transient response without external compensation. Packaged in an 8-pin SOT-23 (DDF) package.

Key Specifications

Function 2A Synchronous Step-Down Converter
Input Voltage 4.5V to 17V
Output Voltage 0.6V to 7V (adjustable)
Output Current 2A
Switching Frequency 600kHz
HS FET RDS(on) 70mΩ
LS FET RDS(on) 40mΩ
Control Mode D-CAP3 (emulated ripple)
Package 8-pin SOT-23 (2.9 × 2.8 mm)
Operating Temperature -40°C to +125°C (TJ)

Features

  • D-CAP3 control mode for fast transient response
  • No external compensation required
  • Synchronous rectification for high efficiency
  • 600kHz switching frequency for small external components
  • Auto-skip mode for light-load efficiency
  • Internal soft start and overcurrent protection

Applications

  • 12V rail point-of-load conversion
  • Set-top box and networking equipment
  • Industrial and telecom power supplies
  • Consumer electronics power management
  • FPGA and processor core power
Product Introduction: TPS562210ADDFR Product Introduction

The TPS562210A is a 2A synchronous step-down converter featuring TI’s D-CAP3 control mode, which provides excellent transient response without requiring external compensation components. The device integrates 70mΩ high-side and 40mΩ low-side MOSFETs, achieving high efficiency across the load range. With a 4.5V to 17V input range and 0.6V to 7V adjustable output, it supports a wide variety of point-of-load applications from 12V and 5V bus architectures. The 600kHz switching frequency balances efficiency and solution size, while auto-skip mode maintains high efficiency at light loads.

Working Principle: TPS562210ADDFR Working Principle

The TPS562210A uses TI’s proprietary D-CAP3 control mode, an adaptive on-time control architecture with emulated internal ripple injection. Unlike traditional current-mode control, D-CAP3 does not require external compensation because it uses an internal ripple generator that emulates the output inductor ripple current. The on-time is adjusted proportionally to the input voltage to maintain a pseudo-constant switching frequency. When the output voltage drops below the reference, a new on-time pulse is initiated. The low-side MOSFET is turned on during the off-time for synchronous rectification, eliminating the need for an external Schottky diode and improving efficiency. At light loads, the device enters auto-skip mode, allowing discontinuous conduction to minimize switching losses.

Pin Description: TPS562210ADDFR Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input supply voltage (4.5-17V)
2 SW Output Switch node — connect to output inductor
3 GND Power Ground and thermal pad
4 FB Input Feedback — connect resistor divider from output
5 EN Input Enable — high enables the device
6 VREG5 Output Internal 5V LDO output — bypass with capacitor
7 PG Output Power-good open-drain output
8 PGND Power Power ground
Application Scenarios: In which products and applications is TPS562210ADDFR used
  • 12V to 3.3V POL conversion in networking equipment
  • 5V to 1.2V core rail for FPGA in industrial systems
  • 12V to 5V intermediate bus in set-top boxes
  • Consumer electronics distributed power architecture
  • Telecom line card point-of-load regulation
Alternative Models: What chips are recommended as replacements for TPS562210ADDFR
Manufacturer Part Number Package Notes
TI TPS563210ADDFR SOT-23-8 3A version of same family
TI TPS562208DDFR SOT-23-8 2A, 580kHz variant
Monolithic Power MP2143GD TSOT-23-8 2A buck, 1.5MHz
Richtek RT6211F SOT-23-8 2A buck, 500kHz
Silicon Labs SiC431 QFN-16 2A buck, integrated FETs

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1