Opens in a new tab

LM2672MX-ADJ/NOPB

1A SIMPLE SWITCHER buck converter, 6.5-40V in, 1.21-37V adj out, 260kHz, 96% eff, SOIC-8

9616

Effective Inventory

Image for reference only

Manufacturer Part:

LM2672MX-ADJ/NOPB

Package:

SOIC-8 3.9×4.9 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM2672MX-ADJ/NOPB from Texas Instruments is a SIMPLE SWITCHER 1A step-down DC-DC converter in an SOIC-8 package, featuring an adjustable output from 1.21V to 37V, 260 kHz switching frequency, and up to 96% efficiency. Its integrated DMOS power switch and patented internal compensation simplify design to just 5 external components.

Key Specifications

Output Current 1A
Input Voltage 6.5V – 40V
Output Voltage 1.21V – 37V (adjustable)
Feedback Voltage 1.21V (nominal)
Switching Frequency 260 kHz (nominal)
Efficiency Up to 96%
Rds(on) of DMOS Switch 0.25 Ohm
Duty Cycle 0% – 95%
Soft Start Internal
Package SOIC-8 (3.9×4.9 mm)
Temperature -40 to +125 deg C (junction)

Features

  • SIMPLE SWITCHER architecture requires only 5 external components
  • Patented internal frequency compensation simplifies design
  • Integrated 0.25 Ohm DMOS power switch for high efficiency
  • TTL-compatible shutdown and low-power standby mode
  • Soft-start and frequency synchronization capabilities

Applications

  • 12V to 3.3V/5V point-of-load conversion
  • Battery-powered step-down regulation
  • Industrial distributed power systems
  • Automotive auxiliary power supplies
  • Embedded system core voltage generation
Product Introduction: LM2672MX-ADJ/NOPB Product Introduction

The LM2672MX-ADJ is a member of the SIMPLE SWITCHER family of step-down voltage regulators from Texas Instruments. It integrates a 0.25 Ohm DMOS power switch and patented internal frequency compensation, requiring only 5 external components for a complete design. The adjustable output version allows programming the output from 1.21V to 37V via an external resistor divider. Operating at 260 kHz switching frequency enables the use of small inductors and capacitors. With up to 96% efficiency and thermal shutdown protection, no heatsink is required as PCB copper traces provide adequate heat sinking.

Working Principle: LM2672MX-ADJ/NOPB Working Principle

The LM2672 uses a voltage-mode PWM control topology with an integrated DMOS power switch. The error amplifier compares the feedback voltage (from the external resistor divider) against the 1.21V internal reference, adjusting the PWM duty cycle to maintain the desired output voltage. The 260 kHz oscillator sets the switching frequency, which can be synchronized to an external clock via the SYNC pin. The soft-start circuit gradually increases duty cycle on startup to limit inrush current. When the ON/OFF pin is pulled low, the device enters standby mode with minimal quiescent current. Current limit and thermal shutdown protect against fault conditions.

Pin Description: LM2672MX-ADJ/NOPB Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input supply (6.5-40V)
2 SWITCH Output Power switch output (to inductor)
3 GND Power Ground
4 CB Power Bootstrap capacitor for high-side driver
5 FB Input Feedback input (1.21V reference)
6 ON/OFF Input Shutdown control (low = off)
7 SYNC Input Frequency synchronization input
8 SS Input Soft-start capacitor connection
Application Scenarios: In which products and applications is LM2672MX-ADJ/NOPB used
  • 12V to 5V step-down: standard automotive/industrial POL conversion
  • Battery-powered regulation: high efficiency extends operating time
  • Adjustable output: custom voltage rails for FPGA and processor cores
  • Industrial controls: wide 6.5-40V input range for 12V/24V systems
  • Distributed power: SIMPLE SWITCHER ease-of-use for quick deployment
Alternative Models: What chips are recommended as replacements for LM2672MX-ADJ/NOPB
Manufacturer Part Number Package Notes
TI LM2672MX-3.3/NOPB SOIC-8 3.3V fixed output variant
TI LM2672MX-5.0/NOPB SOIC-8 5V fixed output variant
TI LM2675MX-ADJ/NOPB SOIC-8 Parametric equivalent, similar spec
TI LM2679T-ADJ/NOPB TO-220-7 5A version, higher current
Monolithic Power MP2315GJ-Z TSOT-23-8 2A, 500kHz, smaller package

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1