Opens in a new tab

TLV62130RGTR

3A 3-17V synchronous buck, 2.5MHz, DCS-Control, 19uA Iq, 100% duty cycle, VQFN-16 3x3mm

12136

Effective Inventory

Image for reference only

Manufacturer Part:

TLV62130RGTR

Package:

VQFN-16 (RGT) 3×3 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLV62130RGTR from Texas Instruments is a 3A, 3V-to-17V synchronous step-down DC-DC converter in a VQFN-16 (RGT) 3×3 mm package. Using DCS-Control topology, it achieves up to 2.5 MHz switching frequency, 19 uA quiescent current, 100% duty cycle mode, and programmable soft-start with power-good output for high-density POL applications.

Key Specifications

Output Current 3A
Input Voltage 3V – 17V
Output Voltage 0.9V – 5.5V (adjustable)
Switching Frequency 1.25 MHz or 2.5 MHz (pin-selectable)
Quiescent Current 19 uA (typical, PSM)
Topology DCS-Control (synchronous buck)
Duty Cycle Up to 100%
Soft Start Programmable (external cap)
Power Good Open-drain output
Package VQFN-16 (RGT) 3×3 mm
Temperature -40 to +85 deg C

Features

  • DCS-Control topology for fast transient response and high output accuracy
  • Pin-selectable switching frequency (1.25 or 2.5 MHz) for design flexibility
  • Seamless power-save mode transition for high efficiency at light loads
  • 100% duty cycle mode for lowest dropout operation
  • Pin-compatible with TPS62130 and TLV62150 for easy upgrades

Applications

  • 12V standard rail point-of-load power supplies
  • Single or multi-cell Li-ion battery-powered systems
  • FPGA and processor core voltage generation
  • Embedded system POL regulation
  • Broadband and networking equipment
Product Introduction: TLV62130RGTR Product Introduction

The TLV62130 is a high-efficiency synchronous step-down DC-DC converter from Texas Instruments optimized for high power density applications. Using TI’s proprietary DCS-Control topology, it delivers fast transient response and high output voltage accuracy. The device supports 3V to 17V input and delivers up to 3A output with adjustable voltage from 0.9V to 5.5V. A pin-selectable switching frequency (1.25 or 2.5 MHz) enables trade-offs between efficiency and solution size. The 19 uA quiescent current in power-save mode and seamless PSM transition ensure high efficiency across the entire load range.

Working Principle: TLV62130RGTR Working Principle

The TLV62130 employs TI’s DCS-Control (Direct Control with Seamless transition) topology, which combines voltage-mode control with a direct feedforward path for fast transient response. At heavy loads, the device operates in PWM mode at the selected frequency (1.25 or 2.5 MHz via FSW pin). As load decreases, it seamlessly transitions to power-save mode (PFM), reducing switching frequency proportionally to maintain efficiency. The 100% duty cycle mode allows the high-side MOSFET to remain on continuously when input voltage approaches output, minimizing dropout. Programmable soft-start via an external capacitor on the SS/TR pin controls output voltage ramp rate. The open-drain PG pin indicates when output is within regulation.

Pin Description: TLV62130RGTR Pin Definition and Functions
Pin Name Type Function
1-3 SW Output Switch node (to inductor)
4 PG Output Power good (open-drain)
5 FB Input Voltage feedback (resistor divider)
6 AGND Power Analog ground
7 FSW Input Frequency select (Low=2.5MHz, High=1.25MHz)
8 DEF Input Output voltage scaling (Low=nominal, High=+5%)
9 SS/TR Input Soft-start / tracking (external cap)
10 AVIN Power Analog/control supply input
11-12 PVIN Power Power stage supply input
13 EN Input Enable (high=on, low=off)
14 VOS Input Output voltage sense and control loop
Application Scenarios: In which products and applications is TLV62130RGTR used
  • 12V to 3.3V POL: standard networking equipment step-down
  • Li-ion to FPGA core: 3.6-4.2V battery to 1.2V core voltage
  • Industrial 24V-to-5V: wide input range for factory automation
  • Portable instruments: 19 uA Iq extends battery life at light loads
  • Broadband/CPE: high density 3x3mm package for space-constrained boards
Alternative Models: What chips are recommended as replacements for TLV62130RGTR
Manufacturer Part Number Package Notes
TI TLV62130RGTT VQFN-16 Same device, different packaging option
TI TPS62130RGTR VQFN-16 Improved variant, pin-compatible
TI TLV62150RGTR VQFN-16 Pin-compatible, higher current (5A)
TI TLV62585RGTR VQFN-16 5.5V max input, 5A version
Monolithic Power MP8759GD-Z QFN-16 9A, similar form factor

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1