Opens in a new tab

TPS53353DQPT

20A synchronous buck SWIFT converter, D-CAP, 1.5-15V input, 5.5/2.2mΩ FETs, 22-LSON-CLIP

5657

Effective Inventory

Image for reference only

Manufacturer Part:

TPS53353DQPT

Package:

22-LSON-CLIP (6.0 × 5.0 × 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS53353DQPT is a high-efficiency 20A synchronous step-down (buck) SWIFT converter from Texas Instruments, packaged in a 22-pin LSON-CLIP (DQP) 6 × 5 mm package. It features integrated 5.5 mΩ/2.2 mΩ NexFET power MOSFETs, D-CAP mode control for fast transient response, and an eco-mode for high light-load efficiency. The device supports a conversion input voltage range of 1.5V to 15V and output from 0.6V to 5.5V.

Key Specifications

Function 20A Synchronous Buck SWIFT Converter
Conversion Input Voltage 1.5V to 15V
VDD Supply Voltage 4.5V to 25V
Output Voltage 0.6V to 5.5V (adjustable)
Output Current 20A continuous
Integrated MOSFETs 5.5 mΩ (HS) / 2.2 mΩ (LS)
Switching Frequency 250 kHz to 1 MHz (selectable)
Control Mode D-CAP
Reference Accuracy 1% (0.6V)
Package 22-LSON-CLIP (6 × 5 mm)
Operating Temperature -40°C to +85°C (ambient)

Features

  • Integrated 5.5 mΩ/2.2 mΩ NexFET power MOSFETs for high efficiency (> 91%)
  • D-CAP mode control for ultra-fast transient response
  • Auto-skip eco-mode for high light-load efficiency
  • Adjustable overcurrent limit with thermal compensation
  • Programmable soft-start: 0.7 ms, 1.4 ms, 2.8 ms, or 5.6 ms
  • Prebiased output startup capability

Applications

  • Server and storage point-of-load regulators
  • Desktop and workstation core voltage rails
  • Telecom infrastructure POL conversion
  • FPGA and ASIC core power delivery
  • High-current DDR memory VDDQ power
Product Introduction: TPS53353DQPT Product Introduction

The TPS53353 is a D-CAP mode, 20A synchronous buck converter with integrated NexFET power MOSFETs, designed for high-efficiency, high-current point-of-load applications. The device integrates 5.5 mΩ high-side and 2.2 mΩ low-side MOSFETs using TI’s NexFET technology, achieving over 91% efficiency from 12V to 1.5V at 20A. The D-CAP mode control provides fast transient response without requiring external compensation components. Features include auto-skip eco-mode, selectable switching frequency from 250 kHz to 1 MHz, programmable soft-start, adjustable overcurrent limit, and comprehensive protection including OVP, UVLO, and thermal shutdown.

Working Principle: TPS53353DQPT Working Principle

The TPS53353 employs D-CAP (Direct Capacitor Area Proportional) mode control, a constant-on-time architecture with internal ripple injection. The on-time is set proportional to VOUT/VIN to maintain a pseudo-constant switching frequency. When the output voltage drops below the 0.6V reference, the high-side MOSFET is turned on for the programmed on-time. The low-side MOSFET is turned on during the off-time to freewheel the inductor current. The internal ripple injection network allows the use of all-ceramic output capacitors without requiring additional ESR for stability. In eco-mode, the device transitions to discontinuous conduction mode (DCM) at light loads by skipping switching pulses, which reduces gate drive and switching losses to maintain high efficiency. The overcurrent limit is adjustable via an external resistor and includes thermal compensation to maintain consistent protection across temperature.

Pin Description: TPS53353DQPT Pin Definition and Functions
Pin Name Type Function
1 VDD Power IC supply voltage (4.5-25V)
2 EN Input Enable — float or tie to VDD for auto-startup
3 COMP Output Error amplifier output — leave floating for D-CAP
4 FB Input Feedback — connect resistor divider from output
5 SS Output Soft start — capacitor sets startup time
6 MODE Input Mode: auto-skip or forced CCM
7 RF Input Frequency set resistor
8 ILIM Input Current limit set resistor
9 PGOOD Output Power good open-drain output
10 GND Power Signal ground
11-12 PGND Power Power ground (low-side FET source)
13-15 SW Output Switch node — connect to inductor
16-18 PVIN Power Conversion input voltage (1.5-15V)
19 BST Power Bootstrap — cap from BST to SW
20-22 VIN Power Main power input
EP Thermal Pad Power Exposed pad (connect to PGND plane)
Application Scenarios: In which products and applications is TPS53353DQPT used
  • 12V to 1.0V core rail for server CPU at 20A in 1U rackmount
  • 12V to 1.5V FPGA VCCINT power delivery with fast transient response
  • 5V to 1.2V DDR4 VDDQ rail in high-density memory modules
  • Telecom 48V-to-12V intermediate bus POL conversion
  • Storage SSD controller core voltage regulation at high current
Alternative Models: What chips are recommended as replacements for TPS53353DQPT
Manufacturer Part Number Package Notes
TI TPS548B28 QFN-28 Newer 20A, smaller Pb-free package
TI TPS53354DQPT LSON-22 Pin-compatible, 30A variant
Infineon IR3897 PQFN-28 12A integrated buck, 4.5-14V
Monolithic Power MP87568 QFN-28 30A, 4.5-16V buck converter
Richtek RT8859 QFN-32 30A, 4.5-14V, PMBus

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1