Opens in a new tab

TPS54618CQRTERQ1

6 A sync buck, 2.95–6 V, AEC-Q100 Grade 0, integrated FETs, 1 MHz, 20-VQFN, automotive

14790

Effective Inventory

Image for reference only

Manufacturer Part:

TPS54618CQRTERQ1

Package:

20-VQFN (RTE) — 3.5 x 3.5 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS54618CQRTERQ1 is a 6 A synchronous step-down converter from Texas Instruments qualified to AEC-Q100 for automotive applications. Packaged in a 20-pin VQFN (RTE), it operates from 2.95 V to 6 V input and provides adjustable output down to 0.6 V at 6 A. The device switches at 1 MHz and integrates both high-side and low-side MOSFETs for minimal external component count in automotive power systems.

Key Specifications

Topology 6 A Synchronous Buck (Integrated FETs)
Input Voltage Range 2.95 V to 6 V
Output Current 6 A
Output Voltage 0.6 V to 5.5 V (Adjustable)
Switching Frequency 1 MHz
Efficiency Up to 95%
Package 20-VQFN (RTE) — 3.5 x 3.5 mm
Operating Temperature -40°C to +150°C (Q1)
Qualification AEC-Q100 Grade 0

Features

  • AEC-Q100 Grade 0 qualified for automotive applications up to 150°C TJ
  • Integrated 19 mΩ high-side and 12 mΩ low-side MOSFETs
  • 1 MHz fixed switching frequency
  • D-CAP2 control mode for fast transient response
  • Power good output and programmable UVLO

Applications

  • Automotive infotainment and ADAS power supplies
  • Car battery to point-of-load conversion
  • Automotive processor and FPGA core power
  • Industrial 5 V / 3.3 V power distribution
  • High-current POL regulation in harsh environments
Product Introduction: TPS54618CQRTERQ1 Product Introduction

The TPS54618C-Q1 is an automotive-grade 6 A synchronous step-down converter from Texas Instruments, qualified to AEC-Q100 Grade 0 for operation up to 150°C junction temperature. The device integrates both high-side and low-side MOSFETs in a compact 20-VQFN package, minimizing external component count. Using D-CAP2 control mode, the device provides fast transient response with no external compensation components. The 1 MHz switching frequency allows small inductor and capacitor values. Features include power good output, programmable UVLO, pre-bias startup, and comprehensive protection.

Working Principle: TPS54618CQRTERQ1 Working Principle

The TPS54618C-Q1 uses TI’s D-CAP2 control mode, a proprietary emulated ripple control architecture that provides fast transient response without external compensation. The internal ripple injection network synthesizes the output voltage ripple information, which the PWM comparator uses for regulation. The integrated 19 mΩ high-side PMOS and 12 mΩ low-side NMOS MOSFETs switch at 1 MHz to deliver up to 6 A output current. The error amplifier compares the FB pin voltage against a 0.6 V internal reference. Over-current protection is implemented by sensing the low-side MOSFET voltage during the off-time. The PGOOD pin indicates when the output is within regulation.

Pin Description: TPS54618CQRTERQ1 Pin Definition and Functions
Pin Name Type Function
1 BOOT I/O Bootstrap capacitor for high-side drive
2 VIN Input Input supply (2.95–6 V)
3 EN Input Enable / UVLO programming
4 SS I/O Soft-start capacitor
5 COMP I/O External compensation (D-CAP2: cap to GND)
6 FB Input Output voltage feedback (0.6 V ref)
7 PGOOD Output Power good indicator (open drain)
8–12 GND/PGND Power Ground connections
13–16 SW Output Switch node (to inductor)
17 PGND Power Power ground
Application Scenarios: In which products and applications is TPS54618CQRTERQ1 used
  • Automotive infotainment head unit 5 V to 1.2 V core power
  • ADAS processor and sensor fusion power supplies
  • Car battery 3.3 V POL regulation in engine compartment
  • Industrial 5 V bus to low-voltage high-current conversion
  • Automotive camera module power supply
Alternative Models: What chips are recommended as replacements for TPS54618CQRTERQ1
Manufacturer Part Number Package Notes
TI TPS54618RTERQ1 20-VQFN Non-C version, same family
TI TPS54560BDDARQ1 8-SO-PowerPAD 5 A, 60 V, automotive buck
TI TPS54540BDDARQ1 8-SO-PowerPAD 5 A, 42 V, automotive buck
Monolithic Power MP8759GH-5-Z QFN-16 9 A, 5 V, sync buck
Infineon TLD5098ELXUMA1 26-TSSOP Automotive buck controller

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1