Opens in a new tab

SY6280AAAC

Current-limited power switch, 2.7-5.5V, 2A, adjustable current limit, SOT-23-6

14611

Effective Inventory

Image for reference only

Manufacturer Part:

SY6280AAAC

Package:

SOT-23-6 (2.9×1.6mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SY6280AAAC from Silergy is a current-limited power distribution switch with adjustable current limit up to 2A, operating from 2.7-5.5V in a compact SOT-23-6 package for USB and hot-swap applications.

Key Specifications

Type Current-limited power switch
Input Voltage 2.7-5.5V
Max Current 2A
Rds(on) 85mOhm typ
Current Limit Adjustable via Rset
Fault Flag Yes (open-drain)
Enable Active high
Package SOT-23-6
Temp -40 to 85C

Features

  • Adjustable current limit via external resistor
  • 85mOhm typical Rds(on)
  • 2A maximum continuous current
  • Reverse current blocking
  • Thermal shutdown protection
  • Under-voltage lockout (UVLO)
  • Open-drain fault flag output
  • Auto-restart after fault
  • Compact SOT-23-6 package

Applications

  • USB port power management
  • Hot-swap power insertion
  • Portable device power distribution
  • Battery charging current limiting
  • Industrial power rail protection
Product Introduction: SY6280AAAC Product Introduction

The SY6280AAAC from Silergy is a current-limited power switch with adjustable current limit up to 2A and 85mOhm Rds(on). Designed for USB power management and hot-swap applications, it features reverse current blocking, thermal shutdown, and an open-drain fault flag in SOT-23-6.

Working Principle: SY6280AAAC Working Principle

The SY6280 integrates a P-channel MOSFET power switch with current sensing and limiting circuitry. The current limit is set by an external resistor connected to the ISET pin. When the load current exceeds the limit, the switch regulates the current and asserts the FAULT flag. Thermal shutdown protects the device during sustained overcurrent. Auto-restart attempts to restore power after the fault clears.

Pin Description: SY6280AAAC Pin Definition and Functions
Pin Name Function
1 OUT Power output to load
2 GND Ground
3 EN Enable input (active high)
4 ISET Current limit set resistor
5 FAULT Fault flag (open-drain)
6 IN Power input
Application Scenarios: In which products and applications is SY6280AAAC used
  • USB port power distribution
  • Hot-swap power insertion
  • Battery charging current control
  • Industrial power rail protection
Alternative Models: What chips are recommended as replacements for SY6280AAAC
Manufacturer Part Number Notes
Silergy SY6280AAAC-V Same with auto-retry variant
TI TPS2552 Similar function
ON Semi NCP380 Current-limited switch
TI TPS2065 Dual-channel alternative

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1