Opens in a new tab

LMZ20502SILR

2A step-down DC-DC power module, 2.7-5.5V, integrated inductor, 4x4mm

13014

Effective Inventory

Image for reference only

Manufacturer Part:

LMZ20502SILR

Package:

SIP (4.0×4.0x1.7mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LMZ20502SILR from TI is a 2A step-down DC-DC power module with integrated inductor in a 4x4mm package. It operates from 2.7-5.5V input and provides an adjustable output from 0.8V to 3.6V.

Key Specifications

Type Step-down DC-DC power module
Input Voltage 2.7-5.5V
Output Voltage 0.8-3.6V (adjustable)
Output Current 2A max
Switching Freq 2 MHz typ
Efficiency Up to 95%
Integrated Inductor, MOSFETs, controller
Package SIP 4x4x1.7mm
Temp -40 to 85C

Features

  • 2A output with integrated shielded inductor
  • 2MHz switching frequency for small footprint
  • Up to 95% efficiency
  • Adjustable output from 0.8-3.6V
  • 2.7-5.5V input range
  • Soft-start and power-good
  • Over-current and thermal protection
  • Only 3 external components needed
  • 4x4mm compact power module

Applications

  • Point-of-load power conversion
  • FPGA and processor core supplies
  • Embedded system power rails
  • Portable device power management
  • Industrial and telecom equipment
Product Introduction: LMZ20502SILR Product Introduction

The LMZ20502SILR from TI is a 2A step-down DC-DC power module with integrated shielded inductor in a 4x4mm package. The module integrates the controller, power MOSFETs, and inductor, requiring only input/output capacitors and a feedback resistor. The 2MHz switching frequency enables compact designs.

Working Principle: LMZ20502SILR Working Principle

The LMZ20502 uses a synchronous buck topology with integrated high-side and low-side MOSFETs. The 2MHz fixed-frequency PWM control provides predictable EMI behavior. The integrated shielded inductor eliminates the need for external inductor selection and layout. The power-good output indicates valid output voltage. Current mode control ensures stable operation across load and line conditions.

Pin Description: LMZ20502SILR Pin Definition and Functions
Pin Name Function
1 VIN Input voltage (2.7-5.5V)
2 ON/OFF Enable control
3 VOUT Output voltage
4 FB Feedback voltage adjust
5 PG Power good output
6 GND Ground (thermal pad)
Application Scenarios: In which products and applications is LMZ20502SILR used
  • FPGA/processor core POL supplies
  • Embedded system 3.3V/1.8V rails
  • Portable device power conversion
  • Telecom equipment POL
Alternative Models: What chips are recommended as replacements for LMZ20502SILR
Manufacturer Part Number Notes
TI LMZ20501SILR 1A version
TI LMZ21700 1A, smaller package
TI LMZM23601 1A, higher voltage input
TI LMZ20503SILR 3A version

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1