Opens in a new tab

TL751L12CDR

150mA LDO voltage regulator with enable, 12V fixed output, 26V input, SOIC-8

3632

Effective Inventory

Image for reference only

Manufacturer Part:

TL751L12CDR

Package:

SOIC-8 (4.9×6.0mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TL751L12CDR from TI is a 150mA low-dropout voltage regulator with TTL/CMOS-compatible enable, 12V fixed output, and 26V maximum input. It features 600mV dropout and 60V load-dump protection in SOIC-8.

Key Specifications

Type LDO voltage regulator with enable
Output Voltage 12V fixed
Input Voltage 6-26V
Output Current 150mA max
Dropout 600mV typ @ 150mA
Iq 1mA typ
Enable TTL/CMOS compatible
Protection 60V load dump, -50V reverse
Temp 0 to 125C
Package SOIC-8

Features

  • 12V fixed output with enable control
  • 600mV typical dropout at 150mA
  • 60V load-dump protection
  • -50V reverse transient protection
  • TTL/CMOS-compatible enable input
  • Internal thermal shutdown
  • Over-voltage protection
  • Over-current limiting
  • Disable current <500uA
  • 2% output voltage accuracy

Applications

  • Automotive voltage regulation
  • Industrial 12V power rails
  • Battery-powered equipment
  • Post-regulation after switching supply
  • Telecom auxiliary power
Product Introduction: TL751L12CDR Product Introduction

The TL751L12CDR from TI is a 150mA LDO voltage regulator with 12V fixed output and enable control. With 60V load-dump and -50V reverse transient protection, it is designed for harsh automotive and industrial environments. The SOIC-8 (DR suffix) package supports 2.5kpcs tape and reel.

Working Principle: TL751L12CDR Working Principle

The TL751L uses a PNP pass transistor for low dropout voltage. The enable input (TTL/CMOS compatible) places the output in high-impedance when driven high, drawing less than 500uA. The 60V load-dump protection handles automotive transients, while the -50V reverse protection guards against reverse battery installation. Thermal shutdown and over-current limiting provide comprehensive protection.

Pin Description: TL751L12CDR Pin Definition and Functions
Pin Name Function
1 OUT 12V regulated output
2 NC No connect
3 EN Enable input (active low for output)
4 GND Ground
5 NC No connect
6 NC No connect
7 IN Input voltage (6-26V)
8 NC No connect
Application Scenarios: In which products and applications is TL751L12CDR used
  • Automotive 12V regulation
  • Industrial power supplies
  • Battery-powered equipment
  • Post-regulation after SMPS
Alternative Models: What chips are recommended as replacements for TL751L12CDR
Manufacturer Part Number Notes
TI TL751L05CDR 5V output version
TI TL751L10CDR 10V output version
TI TL750L12CDR Without enable function
ON Semi NCV4275 Automotive LDO alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1